Products in Marine Fluids & Lubricants

This severely hydrotreated paraffinic base oil provides excellent color and consistency. It passes the IP 346 labeling requirement.

Lubriplate® GPO Motor Oil SAE 40, Motor Oil is a high-quality diesel engine oil designed for use in a wide variety of applications, including off-highway diesel equipment, farm machinery, marine engines, 2-stroke cycle diesel engines (in the appropriate viscosity grades) and mixed commercial fleets. It may be also used in some heavy duty manual transmissions in trucks and busses.

aramcoULTRA 8 is used in engine oil, axle oil and automatic transmission fluid.

FASTEX® FBOG150 is a premium, extreme pressure GEAR OIL for Industrial and Marine service. It is formulated from high viscosity index (VI) paraffinic base oils and blended with a Fastex® Surface Modifier. This proprietary Extreme Pressure (EP) & Anti-Wear (AW) package is used to provide very high load and wear protection to the gear sets and bearings against seizure and surface distress. Protects equipment against thermal damage and corrosion. Proven results for FASTEX® FBOG150 confirm a long service life and dramatically reduced oil change frequencies.

Alpha Lubricants Alpha Premium Hydraulic Oil AW 32 utilize the highest quality zinc anti-wear technology available. While most oils contain less than 350 ppm of zinc, our hydraulic oils all contain 750 ppm of zinc. Extra zinc has been proven to help reduce wear rates in hydraulic systems. These oils are recommended for all industrial hydraulic systems using gear, vane, axial piston, and radial piston designs. They feature excellent resistance to wear, foam, rust, oxidation, and harmful emulsions with water.

UNINAP® 300 AC is a naphthenic process oil.

303 Good Stuff™ is a white, extremely tacky and adhesive grease designed for the most rigorous operating conditions. 303 Good Stuff™ is highly waterproof and provides the toughness necessary to protect equipment under extremely heavy loads.

RB AroFree 200 is an isoparaffinic solvent that meets FDA 21 CFR 178.3620 (b) regulations and is VOC exempt for consumer goods applications. It is approved for both food and non-food application and is produced from all high quality synthetic based feed stocks to ensure only the highest quality end products

KOMAD 8426 is a lubricating grease thickener, Poly-oxo-aluminum-stearate polimer dissolved in synthetic base oil solvent (poly-alpha-olefin). Precursor additive for aluminum complex grease thickeners. Precursor additive for aluminum complex grease thickeners.

Trilene® 77 is is an Ethylene-Propylene-Ethylidene Norbornene Low Molecular Weight Polymer

RB Products Inc. supports the water treatment chemical manufacturing sector with emphasis on our RB Solv aromatic solvents as well as RB TrueSyn™ Synthetic Isoparaffins and RB Aliphatic Solvents.

UNIPAR® 150 AC is a paraffinic process oil.

This severely hydrotreated naphthenic base oil is primarily used in the metalworking and compounder blending industries. It has a low pour point, a low odor level, excellent color, and resistance to discoloration by heat or ultraviolet light.

Alpha Lubricants Alpha Premium Hydraulic Oil AW 46 utilize the highest quality zinc anti-wear technology available. While most oils contain less than 350 ppm of zinc, our hydraulic oils all contain 750 ppm of zinc. Extra zinc has been proven to help reduce wear rates in hydraulic systems. These oils are recommended for all industrial hydraulic systems using gear, vane, axial piston, and radial piston designs. They feature excellent resistance to wear, foam, rust, oxidation, and harmful emulsions with water. Alpha Premium Hydraulic Oils are formulated with additives that are gentle to yellow metal parts such as bronze, brass, or copper. They resist acid formation under high temperatures. Properly maintained and filtered systems will remain free of sludge and varnish. This product contains the Alpha Performance Booster which is proven to decrease friction, vibration, and wear as well as improve seals and extend machine life.

MDS Lubricant Suppliers Bulldog BDX (Bulk) incorporates a finely tuned blend of the latest anti-friction/anti-wear technology incorporating ceramic reinforced PTFE and the latest additives to deliver outstanding performance values offering exceptionally low coefficient of friction and exceptional levels of wear protection in a wide operating temperature range (-40 to +280°C). BDX is non-toxic and odor free. This unique combination of high performance & multi-functionality allows BDX to be the go to product that should be seen as a first option solution for most applications. Rarely do we see a genuine combination of innovation, technology and effectiveness enter the lubricants market in such a dynamic way that it is “a game changer”. BDX is one of those rare products that should really be called a tool as opposed to a lubricant.

Trilene® 67 FF is a Free-Flowing Ethylene-Propylene-Ethylidene Norbornene Low Molecular Weight Polymer on Silicon Dioxide Trilene FreeFlow™ 67 is made by combining Trilene® liquid polymer and silica. The blend is nominally 68% ethylene-propylene copolymer and 32% silica. It is available as a dry, free-flowing powder that is easy to measure, store, and transfer. It incorporates quickly and thoroughly into various elastomer systems, and gives quality and processing advantages when compared to neat polymer. Trilene FreeFlow™ 67 is effective in EPDM, BR, NR, SBR and other elastomers.

Ergon’s HyGold base oils are genuine naphthenic and paraffinic oils produced to exact specifications and designed for a variety of lubricating applications. HyGold products have low pour points, good solvency power, low odor levels, excellent color and color stability characteristics.

RB Products manufactures and supplies an extensive line of additive componentry products, which provide performance enhancements when added to a chosen base oil mixture. RB ADS 1001 is generally used with alkaline detergents, corrosion and oxidation inhibitors, in gasoline and diesel engine oils. This additive provides excellent low-temperature sludge and varnish control in gasoline engines and effective dispersancy in high-temperature super‐charged diesel engines due to its excellent thermal stability.

Power Research PRI-FLOW is a super concentrated anti-gel treatment that keeps fuel flowing and diesel engines running in the most severe cold weather conditions. Added to fuel, PRI-FLOW reduces the fuel’s pour point and cold filter plug point (CFPP). PRI-FLOW is effective in all of today’s VLSFO and MGO fuels. In fact, independent lab tests show where PRIFLOW outperforms all the major brands Best of all, PRI-FLOW is super concentrated.

Ergon’s HyGold base oils are genuine naphthenic and paraffinic oils produced to exact specifications and designed for a variety of lubricating applications. HyGold products have low pour points, good solvency power, low odor levels, excellent color and color stability characteristics.

Power Research PRI-XL is specifically formulated to provide the optimum level of protection possible for marine fuel pumps and marine engines operating on 0.1% sulfur marine gas oil (MGO) and 0.50% sulfur VLSFO. Incorporating the same superior lubricity chemistry found in our PRI-D Lubricity/Stability treatment, PRIXL is a stand-alone ester based lubricity chemistry, providing the identical level of lubricity protection as PRI-D but at two and half times the concentration. This provides an economic but equally powerful tool for vessel owners who demand the very best at a cost-effective price.

Ergon’s HyGold base oils are genuine naphthenic and paraffinic oils produced to exact specifications and designed for a variety of lubricating applications. HyGold products have low pour points, good solvency power, low odor levels, excellent color and color stability characteristics.

ALCO-EP-73 PLUS™ is a premium, state-of-the-art, multipurpose aluminum complex grease containing a highly synergistic blend of rust and oxidation inhibitors plus extreme pressure and anti-wear additives for maximum performance characteristics. The non-plating, organic EP/anti-wear additives allow ALCO-EP-73 PLUS to be used where tolerances are low and/or speeds are high.

UNIPAR® 80 CC is a paraffinic process oil.

UNIPAR® 60 TOM is a paraffinic process oil.

An Ethylene-Propylene Liquid Copolymer Trilene® CP-2000 is an intermediate low molecular weight ethylene-propylene liquid copolymer, randomly polymerized to produce a liquid elastomer with a stable, saturated hydrocarbon backbone. It has thermal and oxidation stability under normal conditions. Trilene® CP-2000 can be used as a viscosity thickener for a wide range of lubricant products providing good shear stability and low temperature characteristics.

Magnalube®-G is a non-soap polyurea lubricating grease formulated with the highest quality raw materials. Magnalube®-G has a unique formula that blends PTFE and polyurea for superior performance. The grease will prevent breakdowns, and extend operating intervals in most cases. It is fortified with a number of proprietary additives that inhibit rust and oxidation as well as giving added resistance to extreme pressure. Magnalube®-G has a dropping point of well over 500°F. It performs well in harsh environments, especially when users want to avoid migration and water washout. This is a superb all-purpose grease, and is often found to solve problems that other greases cannot.

Ultra S-4 is a base oil series consists of five viscosity grades,Ultra-S 2,3,4,6 and 8 named according to their viscosity (cSt) at 100.

MDS Lubricant Suppliers BDX 01 - Bulldog BDX incorporates a finely tuned blend of the latest anti-friction/anti-wear technology incorporating ceramic reinforced PTFE and the latest additives to deliver outstanding performance values offering exceptionally low coefficient of friction and exceptional levels of wear protection in a wide operating temperature range (-40 to +280°C). BDX is non-toxic and odor free. This unique combination of high performance & multi-functionality allows BDX to be the go to product that should be seen as a first option solution for most applications. Rarely do we see a genuine combination of innovation, technology and effectiveness enter the lubricants market in such a dynamic way that it is “a game changer”. BDX is one of those rare products that should really be called a tool as opposed to a lubricant.

AmpCool® Dielectric Coolants - AC-110 is a dielectric coolant designed specifically for immersion cooling of batteries, chargers, invertors, and associated electronics used in grid storage, fixed, mobile and vehicular applications. AmpCool® Dielectric Coolants - AC-110 feature the broadest material compatibility index, highest dielectric strength, zero environmental impact, and best health and safety ratings available.

KOMAD 309 A is a dispersant, Polyisobutenyl-mono-bis-succinimide type ashless dispersant additive in mineral oil raffinate solvent. Dispersant additive typically applied in petrol engine oils. Applicable as fuel system cleaning additive (e.g. detergent in diesel fuel).

UNINAP® 40 JS is a naphthenic process oil.

RS Clare & Co Ltd BRB-LEM NLGI 2 is a lithium soap thickened grease with extreme pressure (EP) and anti-wear properties. Medium viscosity mineral base oil. BRB LEM is inhibited against oxidation corrosion, it is adhesive, water resistant, and has good pumpability. The solid lubricant gives a lasting film on moving surfaces, reduces wear, and provides emergency running properties.

Tribostar MGI 10000 BM is an extra fluid mineral based grease.

TRIBOSTAR MCS 462 is an NLGI grade 2 mineral oil grease with excellent anti-corrosion properties, high water resistance, very high load capacity & high mechanical working stability with a working temperature of -15 to 160°C. It is a highly efficient calcium sulphonate, anti-corrosive water resistant grease. It is ideal for sea water immersion applications & wire rope applications. Cable life cycle and performance are influenced by several factors, including type of operation, care and environment.

TRIBOSTAR MCS 461/2 is an NLGI grade 1/2 mineral oil grease with excellent anti-corrosion properties, high water resistance, very high load capacity & high mechanical working stability with a working temperature of -15 to 160°C.