Products in Other Automotive & Transportation Applications: Impact R...

PPS-GF30, linear PPS, 30% glass fiber reinforced, impact resistant, approved for food applications according to EU and FDA guidelines.

ROMILOY® 4010 is PA/ABS, injection molding grade, high-impact.

Armlen PP MD 40-5TS is a 40% mineral filled thermos-stabilized polypropylene. This material displays high resistance to impact loads, good rigidity, and dimensional stability. Designed for injection molding and extrusion of various items and parts for construction, electrical tools, machine engineering, household appliances, transportation, camping equipment etc. Available in white color.

Acti-Tech™ Compatibilizer 16MA13are based on Vistamaxx™ performance polymers grafted with maleic anhydride through a highly efficient melt-grafting process.Acti-Tech compatibilizer 16MA13 is the softest grade among the Acti-Tech compatibilizers range. With its high elasticity and very high flexibility, it is designed to enhance performance of a wide variety of polymer compounds and is particularly recommended for the following applications such as impact modifier of engineering thermoplastics, performance booster for recycled feeds, coupling agent for mineral HFFR fillers. This material can be used in combination with Vistamaxx performance polymer to bring the required balance of properties to PP/PET or PE/PET recycled feeds.

Gichem CG05/KM Polypropylene is PP copolymer, 25% talc, high impact resistance.

ROMILOY® 1035/04 F is PC/ABS, injection molding grade, easy-flowing, high-impact.

Selenis Maven NF 421 is an amorphous copolyester that has been specifically developed for the extrusion of heavy gage sheets, allowing for high thicknesses without crystallization occurring. Selenis Maven NF 421 is the best possible solution when exceptional clarity, surface gloss, and neutral edge color are required. Selenis Maven NF 421 is recommended when a very demanding performance and outstanding toughness are essential, such as, ultimate impact strength at low temperatures and good chemical resistance to detergents and other household cleaning agents. Thanks to its inherent toughness, sheets produced from Selenis Maven NF 421 may be down-gaged without compromising performance. Cost-savings are possible given that there is no need to pre-dry the sheets. Selenis Maven NF 421 is easy to process on standard extrusion lines. Sheets made with Selenis Maven NF 421 may be easily thermoformed, cold-bent, drilled, sawed, screwed, adhesive bonded, routed and personalized though different methods of decoration. All Maven grades are BPA and styrene free.

ROMILOY® 5730/01 is PC/PBT, injection molding grade, high-impact.

A 40% mineral filled, thermostabilized polypropylene. This material displays high resilience to impact, good rigidity, dimensional stability. This material is compliant with European safety requirements. Available in white color.

Acti-Tech™ Compatibilizer 11MA13 are based on Vistamaxx™ performance polymers grafted with maleic anhydride through a highly efficient melt-grafting process.Acti-Tech compatibilizer 11MA13 is a medium flexibility, low MFR grade among the Acti-Tech compatibilizers range. With its high viscosity, it is designed to enhance performance of a wide variety of polymer compounds and is particularly recommended for the following applications such as tie-layer material for film & sheet, adhesion promoter on metal, yarns or other polar substrates, soft compatibilizer for polar/unpolar polymers alloys, impact modifier of stiff polar engineering plastics.Due to the chemical nature of its polymer backbone, Acti-Tech compatibilizer 11MA13 is compatible with most polyolefins, i.e. PE, PP, EVA, EBA or POE.

ROTEC® AES A 711 is AES, injection molding grade, easy-flowing, good weather resistance.

ROMILOY® 5720/01 is PC/PBT, injection molding grade, easy-flowing, high-impact, UV stabilized.

Gichem BG04/KM Polypropylene is PP copolymer, 20% mineral filler with very high impact resistance also with low temp. High injection speed.

ROMILOY® 6020 UV is PC/ASA, injection molding grade, high-impact, high heat resistance, UV stabilized.

ULTRA-PLAST™ WF101 contains amide, which has reactive sites available for hydrogen bonding and can therefore act as a coupling agent between polymer and filler. ULTRA-PLAST™ WF101 acts as an efficient blending and dispersing agent in wood filled systems, leading to a more homogeneous blend. ULTRA-PLAST™ WF101 works as an excellent lubricant under high shear conditions, for example injection molding.

Selenis Maven NF 411 is an amorphous copolyester that has been specifically developed for the extrusion of heavy gage sheets, allowing for high thicknesses without crystallization occurring. Selenis Maven NF 411 is the best possible solution when exceptional clarity, surface gloss, and neutral edge color are required. Selenis Maven NF 411 is recommended when a very demanding performance and outstanding toughness are essential, such as, maximum impact strength at low temperatures and good chemical resistance to detergents and other household cleaning agents. Thanks to its inherent toughness, sheets produced from Selenis Maven NF 411 may be down-gaged without compromising performance. Cost-savings are possible given that there is no need to pre-dry the sheets. Selenis Maven NF 411 is easy to process on standard extrusion lines. Sheets made with Selenis Maven NF 411 may be easily thermoformed, cold-bent, drilled, sawed, screwed, adhesive bonded, routed and personalized though different methods of decoration. All Maven grades are BPA and styrene free.

A 40% mineral filled, thermostabilized, polypropylene gomopropilen. This material displays high resilience to impact loads, good rigidity and dimensional stability. This material is compliant with European security requirements. Available in white color.

ROMILOY® 3020/07 is ASA/PA, injection molding grade, high-impact, UV stabilized.

ROTEC® ABS 1002 FR V0/5 is ABS, injection molding grade, transparent, waterclear.

ROMILOY® 6040 E UV is PC/ASA, injection molding grade, high-impact, good UV resistance, high heat resistance.

ROMILOY® 1015 ER is PC/ABS, extrusion and injection molding grade, high-impact, high heat resistance.

Selenis Maven MS 105 is a copolyester with a slow crystallization rate and is suitable for the extrusion of heavy gage sheets, allowing for thicknesses up to 2 mm, without crystallization occurring. Selenis Maven MS 105 is the most economic solution for flat sheets up to this thickness range, when good clarity, surface gloss, and neutral edge color are required.

Piolen® T20A37 also known as PP-Copo TV20 has impact resistant with various colors.

ROTEC® ABS 3001 TR-AC is ABS, injection molding grade, easy-flowing, waterclear.

Maven NF 300 is an economical solution for the extrusion of heavy gage sheet that allows for high thicknesses without crystallization occurring. Selenis Maven NF 300 is an amorphous copolyester that has been specifically developed for the extrusion of heavy gage sheets, allowing for high thicknesses without crystallization occurring. Selenis Maven NF 300 is a very economical polymer for this highly competitive market environment. In competition with other polymers frequently used in the heavy gage sheet business such as Polycarbonate, PMMA and Polystyrene Selenis Maven NF 300 is sensibly priced while featuring excellent clarity, good surface gloss, and a practically neutral edge color. 

ROTEC® ABS 2001 TR-AC is ABS, injection molding grade, easy-flowing, waterclear.

ULTRA-PLAST™ WF109 improves the fiber dispersion in wood plastic composites based on PVC. It shows lubricating properties, thus increasing the output. ULTRA-PLAST™ WF109 is also very effective in other polyolefin compounds where improved processability is needed.

Selenis Maven MS 110 is a copolyester with a slow crystallization rate and is suitable for the extrusion of heavy gage sheets, allowing for thicknesses up to 4mm, without crystallization occurring. Selenis Maven MS 110 is the most economic solution for flat sheets up to this thickness range, when good clarity, surface gloss, and neutral edge color are required.

Acti-Tech™ Compatibilizer 09MA13 are based on Vistamaxx™ performance polymers grafted with maleic anhydride through a highly efficient melt-grafting process. Acti-Tech compatibilizer 09MA13 is a highly versatile grade with average MFR among the Acti-Tech compatibilizers range. It is designed to enhance performance of a wide variety of polymer compounds and is particularly recommended for the following applications such as compounding formulation, adhesion promoter on metal or other polar substrates, soft compatibilizer for polar/unpolar polymers alloys, impact modifier of stiff polar engineering plastics, coupling agent for WPC, natural fiber or mineral HFFR fillers. Due to the chemical nature of its polymer backbone, Acti-Tech compatibilizer 09MA13 is compatible with most polyolefins, i.e. PE, PP, EVA, EBA or POE.

Maven MS 110 GE is the perfect choice if looking for higher transparency. Suitable for the extrusion of heavy gage sheets, this grade allows for thicknesses of up to 6mm, without crystallization.

ROMILOY® 1015/01 F is PC/ABS, injection molding grade, easy-flowing, high-impact, high heat resistance, meets requirements FMVSS 302 B, DBL 5307.10, BMW 601 21.0 VW TL 1010.

ROMILOY® 4010/07-1 UV is PA/ABS, injection molding grade, easy demolding, UV stabilized.

ROTEC® ABS 1001 FR/E is ABS, extrusion and injection molding grade, flame retardant.

ROTEC® ABS 1002 FR V0/4 is ABS, injection molding grade, flame retardant.