Products in Other Automotive & Transportation Applications

G-PAEK™ 1200P G is Ultra High performance thermoplastic polymer, unreinforced Polyether Ketone, semi crystalline, powder for extrusion compounding, standard flow, food contact compliant, color natural white.

ROTEC® ABS 1002 FR V0/5 is ABS, injection molding grade, transparent, waterclear.

Sanitized® MB PE 23-70 by Sanitized Antimicrobial is an antimicrobial agent. It has a reliable effect against a large number of microorganisms such as gram-positive and gram-negative bacteria, yeasts, algae, fungi and molds.

Cel-Span® CFA 200 is a 50% active Binary foaming agent specially formulated with activators and self-nucleating agents that contribute to uniform cell formation and smooth surfaces. CelSpan® CFA 200 concentrate releases mostly N2 and CO2 gasses upon decomposition. This product is safe when used under the conditions of intended use. Upon complete decomposition (activation) of the C.F.A., the extruded and injected parts will become white, similar in color to endothermic chemical foaming agents. Cel-Span® CFA 200 is recommended for extrusion, injection, and structural molding of any kind of thermoplastics, except polycarbonate and thermoplastic polyesters.

ANSALENE PP FK A02 000 1051 AT is carbon fiber reinforced Polypropylene Homopolymer for injection molding.

PC-ABS Gebablend 65 type with high impact and notched impact strength.

Sunlube CA-10 is in fine powder form and it is chemically known as Calcium Stearate.

NYPOL® A3 G10 N10 NTLA014 NR514 is a 6.6 polyamide with 10% extra lubricated fiberglass

Zinc Stannate(ZS) is a white powder, insoluble in water, it is non‐toxic fire retardant and low heating rate of flame retardants, flame retardant and inhibit the double effect of the smoke. Suitable for use within the operating temperature below 570 °C material.

Trecora Chemical CWP500E is a polyethylene wax. Imparts a non-stick character to a coating that decreases the tendency for blocking. Can aid in the resistance properties of a coating. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Provides anti-block, release and gloss control properties. Can be used to control gloss to achieve a desired matt effect. CWP500E by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

ROTEC® ABS 1001 GK20 is PPE/PS-I, injection molding grade, 10% glass fiber reinforced, high heat resistance, high stiffness.

Disheng Technology Ultraviolet absorber UV-531 (BP-12, UV-81) is a high-efficiency ultraviolet absorber with excellent performance, which can absorb ultraviolet light of 270-340 nanometers; It has the characteristics of light color, non-toxic, good compatibility, low migration and easy processing;.

PROFLEX CKWD is a styrene-ethylene-butylene-styrene material for injection molding.

Calprene H6140 is a 69/31 ethylene-butylene/styrene ther-moplastic copolymer, polymerized in solution and having a linear structure with excellent ozone resistance.This product is available in: - Calprene H6140 porous crumbs. - Calprene H6140 P powder form dusted WITH amorphous silica. - Calprene H6140 PH powder form WITHOUT any dusting agent.

Birch Plastics BirCom AM05 is the active antimicrobial ingredients prevent it from growing, producing energy, replicating or inhibiting any further growth. BirCom AM05 antimicrobial does not wear off or leach out over time and provides long-lasting and effective product protection from microbes.

Elastomag® 100 magnesium oxide is a high activity grade of magnesium oxide with lower activity thanstandard Elastomag 170. Elastomag 100 is made from magnesium-rich brine and dolomitic lime at our Manistee, Michigan plant.

Acti-Tech™ Compatibilizer 11MA13 are based on Vistamaxx™ performance polymers grafted with maleic anhydride through a highly efficient melt-grafting process.Acti-Tech compatibilizer 11MA13 is a medium flexibility, low MFR grade among the Acti-Tech compatibilizers range. With its high viscosity, it is designed to enhance performance of a wide variety of polymer compounds and is particularly recommended for the following applications such as tie-layer material for film & sheet, adhesion promoter on metal, yarns or other polar substrates, soft compatibilizer for polar/unpolar polymers alloys, impact modifier of stiff polar engineering plastics.Due to the chemical nature of its polymer backbone, Acti-Tech compatibilizer 11MA13 is compatible with most polyolefins, i.e. PE, PP, EVA, EBA or POE.

BIONOX® 565 is a high molecular weight; non-staining, multifunctional antioxidant developed for the stabilization of unsaturated elastomers (BR, IR, SBR, SIS, SBS, etc.), hot melt adhesives, and rosin ester tackifier resins.

Flowing agent for powder coatings Lu'An Jietonda New Material SA88 is a flow agent which can be used for any powder coating system such as EP.PES/EP hybrid ,PES/TGIC.PES/Primid and PU etc .

Revolve M-601 is a Super-Linear® rotational molding grade designed to provide high stiffness without compromising impact properties and toughness which makes the grade ideal for any leisure marine products like kayaks, canoes and boats. M-601 is suitable for multi-layer applications in combination with any Matrix foam.

PETOL 250-3 is a polyoxypropylene triol, 670-average molecular weight. This polyether triol is used in the manufacture of rigid, semi-rigid and special flexible polyurethane foams. If blended with other PETOL polyols, it can vary physical and mechanical characteristics of semi-rigid and rigid polyurethane foams. The product is also used in blends for applications used in the production of coatings, adhesives and casting elastomers.

KYDEX® 6200 meets both the Federal Transit Administration (FTA) and the Federal Rail Administration (FRA) for smoke emission and flammability as tested under ASTM E-662 & ASTM E-162. A proprietary, high performance, fire-rated thermoplastic sheet designed for use in mass transit vehicles such as subways, vans, busses and trains.

ROTEC® ABS HF 3 is ABS, injection molding grade, easy-flowing.

Piolen® T10H19 also known as PP-Homo TV10 is a natural heat stabilized.

Gichem DG06 Polypropylene is PP 30% talc, good mechanical characteristics, High Injection Speed.

WSD Chemical Dibutyl phthalate/DBP Super Grade used for main plasticizer for cellulosic resins and polyvinyl chloride, good solvent potency and good compatibility, fine softening property, but less aging-duration and anti-wanter-extraction.DBP plasticizer also used as plasticizer for polyvinyl acetate, alkyd resins, ethyl cellulose and rubbers.

ADK STAB 517 also called PDDP is applied in ABS, PVC, engineering plastics and contains features such as color improvement and high heat stability.

Plaox 1076 with good synergistic Of Plaox-168, Plaox-DLTDP. can retard heated degradation and Oxidative degradation Of polymer substances during processing and in end application. It can be widely used for PE, PP, POM, ABS resin and other compound resin. compound rubber and petrochemical products. The dosage is recommended to be 0.1 — 0.5 phr.

ROMILOY® 2720 is PC/PET, injection molding grade, easy-flowing, impact-resistant, high heat resistance.

Inhance Fluoro-Seal UH-1900 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

ROTEC® ABS 5001 is ABS, injection molding grade, high-impact.

Sanitized® MB E 99-58 by Sanitized is an antimicrobial additive based on a natural active substance in form of silver ions encapsulated in a patented ceramic material.