Products in Other Transportation Applications

Anvil Paints 770001 ROOF-TEC ACRYLIC WHITE roof coating formulated with interlocking fibers that provide superior bridging of the coating over seams and small separations. It contains interlocking fibers that increase the coatings durability to withstand weathering.

Shurtape Technologies CP 450 is used for use in moderate temperature, demanding paint masking applications in the transportation (auto, coaches, busses and marine) and metal fabrication industries.

SCIGRIP® SG300-05 Methacrylate Adhesives are two-component, 10:1 mix ratio products for bonding metals, composites and other plastic parts1 . Most metals can be bonded without primer2 . These advanced products are designed to meet specific requirements of the transportation industry, including reduced read through on show surfaces. The combination of minimum surface preparation1, 2, primerless metal bonding and low read through makes the SG300 series products ideal for a variety of assembly operations. Packaging options include 490 ml cartridges and 5 and 50 gallon (19 and 189 liters) in bulk containers for application with meter-mix dispense equipment.

Selenis Maven NF 421 is an amorphous copolyester that has been specifically developed for the extrusion of heavy gage sheets, allowing for high thicknesses without crystallization occurring. Selenis Maven NF 421 is the best possible solution when exceptional clarity, surface gloss, and neutral edge color are required. Selenis Maven NF 421 is recommended when a very demanding performance and outstanding toughness are essential, such as, ultimate impact strength at low temperatures and good chemical resistance to detergents and other household cleaning agents. Thanks to its inherent toughness, sheets produced from Selenis Maven NF 421 may be down-gaged without compromising performance. Cost-savings are possible given that there is no need to pre-dry the sheets. Selenis Maven NF 421 is easy to process on standard extrusion lines. Sheets made with Selenis Maven NF 421 may be easily thermoformed, cold-bent, drilled, sawed, screwed, adhesive bonded, routed and personalized though different methods of decoration. All Maven grades are BPA and styrene free.

EPALEX 7552 is a very high flow, rubber modified with High Impact polypropylene grade by PolyPacific, reinforced with mineral.

Plain bearing material based on PPS, PPS + carbon fiber + graphite

Cera-Lube™ Nano Ceramic Grease is a high-performance, highly stable lubricant that delivers unmatched performance, durability, and wear resistance. It outlasts PTFE greases in the same applications by ten times due to its lower friction coefficient and its ability to operate in a wider range of temperatures. Cera-Lube has high load-bearing properties; a low dielectric constant; does not contain metal or silicone; and is resistant to water, steam, acids, and most chemical products, giving the lubricant greater longevity, even under intense pressures and temperatures.

SINTERLINE® Unfilled are the first polyamide 6 powder range designed for selective laser sintering (SLS). This solution yields the mechanical and thermal performance required to make 3D parts printing a compelling option for prototyping and low to medium volume production.

Suitable for products requiring high impact strength and low temperature performance

Red Spot Paint & Varnish Co. 458W is flexible interior in-mold coating with Polyurethane and PVC substrate.

BARLOG plastics GmbH Kebaform® / C 130 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Due to its property profile, Kebaform® / C 130 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow any compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

BARLOG plastics GmbH Kebaform® / C 25 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Kebaform® / C 25 H improves the sliding and wear behavior solely by modifying the polymer chain and there is no reduction in mechanical properties due to the addition of tribologically active additives. Due to its property profile, Kebaform® / C 25 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

Atlantic Equipment Engineers Inc AL-101 is an atomized, nodular metallic powder. A silvery white, light, durable and functional metal, making it one of the most critical engineering and manufacturing materials. Aluminum is one of the lightest metals to exist. It is particularly known for its strength, flexibility, and corrosoion resistance. Since it cannot become magnetized, it makes for a great electiricty conductor, and readily makes alloys with almost any metal. It can be found in a diverse range of applications, from planes, tranes and automobiles to telephones and everryday objects, many of which would simply not exist without aluminum.

Lumicene® mPE M3581 UV is a Second generation Metallocene PE for rotomolding applications requiring good mechanical properties and gloss.

Selenis Maven MS 110 is a copolyester with a slow crystallization rate and is suitable for the extrusion of heavy gage sheets, allowing for thicknesses up to 4mm, without crystallization occurring. Selenis Maven MS 110 is the most economic solution for flat sheets up to this thickness range, when good clarity, surface gloss, and neutral edge color are required.

AeroWindTech AWTFGC 120 is fiberglass fabric have many unique and outstanding properties, which provide design opportunities for the improvement of existing products and the development of new, lightweight, and cost-efficient products. Inorganic fiberglass textile fibers will not rot, mildew, or deteriorate. They resist most acids, have excellent thermal properties, and high tensile strength ideal for the transportation industry. When choosing your fiberglass, you must consider thickness, weight, construction, yarn size and finish desired. All fiberglass products offered are supported with BMS specification 9-3, AMS or Mil specifications to fulfill all rigid requirements within aerospace manufacturing requirements.

EPALEX PDR 7408/2 UV3 is a very high flow, rubber modified with High Impact polypropylene grade by PolyPacific, reinforced with mineral.

SCIGRIP® SG300-40 Methacrylate Adhesives are two-component, 10:1 mix ratio products for bonding metals, composites and other plastic parts1 . Most metals can be bonded without primer2 . These advanced products are designed to meet specific requirements of the transportation industry, including reduced read through on show surfaces. The combination of minimum surface preparation1, 2, primerless metal bonding and low read through makes the SG300 series products ideal for a variety of assembly operations. Packaging options include 490 ml cartridges and 5 and 50 gallon (19 and 189 liters) in bulk containers for application with meter-mix dispense equipment.

Maven NF 300 is an economical solution for the extrusion of heavy gage sheet that allows for high thicknesses without crystallization occurring. Selenis Maven NF 300 is an amorphous copolyester that has been specifically developed for the extrusion of heavy gage sheets, allowing for high thicknesses without crystallization occurring. Selenis Maven NF 300 is a very economical polymer for this highly competitive market environment. In competition with other polymers frequently used in the heavy gage sheet business such as Polycarbonate, PMMA and Polystyrene Selenis Maven NF 300 is sensibly priced while featuring excellent clarity, good surface gloss, and a practically neutral edge color. 

Anvil Paints 770005 ROOF-TEC ACRYLIC WHITE) roof coating formulated with interlocking fibers that provide superior bridging of the coating over seams and small separations. It contains interlocking fibers that increase the coatings durability to withstand weathering.

EPALEX 7555 HS UV2 is a very high flow, rubber modified with High Impact polypropylene grade by PolyPacific, reinforced with mineral.

PPS, linear, unreinforced, impact modified

Red Spot Paint & Varnish Co. UVB325 is UV cure basecoat for metallizing BMC, Nylon, PBT, PC/ABS and PET/PBT substrate.

Marshall Additive Technologies SDAOM 100% Ammonium Octamolybdate smoke suppressant.

SCIGRIP® SG230HV is a two-component, 10:1 mix ratio product for bonding composite and other plastic parts with little to no surface preparation1,2. The adhesive is designed to work with a selection of activators to provide a wide range of working times from 30 to 120 minutes. SG230 HV is mostly used in marine, transportation and construction applications. It is especially suited for bonding large structural parts requiring long working times and for filling deep irregular gaps up to 1.5 inches (39 mm). SG230 HV is available in 490 ml cartridges and 5 and 50 gallon (19 and 189 liters) in bulk containers for application with meter-mix dispense equipment. The combination of SG230 HV A with SG220 B activator is recommended only for use above 85°F (29°C) ambient temperature.

Royal Gent SP-1095 has hardness, adhesion and fast drying.

Atlantic Equipment Engineers Inc AL-102 is an atomized, nodular shaped metalllic powder. A silvery white, light, durable and functional metal, making it one of the most critical engineering and manufacturing materials. Aluminum is one of the lightest metals to exist. It is particularly known for its strength, flexibility, and corrosoion resistance. Since it cannot become magnetized, it makes for a great electiricty conductor, and readily makes alloys with almost any metal. It can be found in a diverse range of applications, from planes, tranes and automobiles to telephones and everryday objects, many of which would simply not exist without aluminum.

Enflon® 131 is 10% carbon. Carbon has good chemical resistance to corrosive environments. It exhibits good initial wear and rubbing or sliding contact characteristics, both dry and water applications. It is frequently used in piston rings to reduce cylinder wall wear by entrapping abrasive foreign particles in their relatively soft surfaces.

Niskoat NexShield HS Urethane Coating is a two-component, premium quality polyurethane topcoat, ideal for applications requiring durability, great appearance, corrosion and chemical resistance, and a high gloss finish. It is excellent for use on heavy equipment, exterior storage tanks, trucks and trailers, farm implements, and oilfield equipment.

AeroWindTech AWTFGC 1597 is fiberglass fabric have many unique and outstanding properties, which provide design opportunities for the improvement of existing products and the development of new, lightweight, and cost-efficient products. Inorganic fiberglass textile fibers will not rot, mildew, or deteriorate. They resist most acids, have excellent thermal properties, and high tensile strength ideal for the transportation industry. When choosing your fiberglass, you must consider thickness, weight, construction, yarn size and finish desired. All fiberglass products offered are supported with BMS specification 9-3, AMS or Mil specifications to fulfill all rigid requirements within aerospace manufacturing requirements.

EPALEX 7581/3 is a very low flow, rubber modified polypropylene grade by PolyPacific.

Red Spot Paint & Varnish Co. 392S is thermal cure primer coat with Non-PP, Non-TPO, Noryl GTX and Nylon substrates.

AeroWindTech AWTFGC 7587 is fiberglass fabric have many unique and outstanding properties, which provide design opportunities for the improvement of existing products and the development of new, lightweight, and cost-efficient products. Inorganic fiberglass textile fibers will not rot, mildew, or deteriorate. They resist most acids, have excellent thermal properties, and high tensile strength ideal for the transportation industry. When choosing your fiberglass, you must consider thickness, weight, construction, yarn size and finish desired. All fiberglass products offered are supported with BMS specification 9-3, AMS or Mil specifications to fulfill all rigid requirements within aerospace manufacturing requirements.

Paladin Paints & Chemicals PPA 7040 is Epoxy Curing Agent.

Atlantic Equipment Engineers Inc AL-100 is a nodular shaped, gray metal powder. A silvery white, light, durable and functional metal, making it one of the most critical engineering and manufacturing materials. Aluminum is one of the lightest metals to exist. It is particularly known for its strength, flexibility, and corrosoion resistance. Since it cannot become magnetized, it makes for a great electiricty conductor, and readily makes alloys with almost any metal. It can be found in a diverse range of applications, from planes, tranes and automobiles to telephones and everryday objects, many of which would simply not exist without aluminum.

AeroWindTech AWTFGC 7781 is fiberglass fabric have many unique and outstanding properties, which provide design opportunities for the improvement of existing products and the development of new, lightweight, and cost-efficient products. Inorganic fiberglass textile fibers will not rot, mildew, or deteriorate. They resist most acids, have excellent thermal properties, and high tensile strength ideal for the transportation industry. When choosing your fiberglass, you must consider thickness, weight, construction, yarn size and finish desired. All fiberglass products offered are supported with BMS specification 9-3, AMS or Mil specifications to fulfill all rigid requirements within aerospace manufacturing requirements.