Products in Architectural Coatings

DIACRON™ FC-3352 is a polyester resin with excellent environmental friendliness using 5wt% of biomass material. It is a high Tg and a low molecular weight (Mw)-grade and is optimal as a binder for paints and inks. Especially, the use of organic solvents can be reduced because low viscosity high-solid solutions are possible. It improves hardness, heat resistance, toughness, and solvent resistance by using curing agents such as isocyanates and epoxy resins.   Features: Excellent chemical resistance Heat-resistant Excellent pigment dispersion. Can be used with cross-linking agents   Benefits: Solvent solubility High solid differentiation Use of biomass raw materials   Applications: PCM coatings For various types of inks Solventless & High Solids Coating   *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

StanChem Polymers SC 6445 is an acrylic copolymer emulsion that exhibits excellent UV resistance, good solvent resistance, good pigment binding and SC 6445 being carboxylated, can be cross-linked with melamine.

StanChem Polymers SC 5184 is a vinyl /acrylic copolymer designed for use in interior architectural coatings demanding excellent scrub resistance and reliable pigment dispersions.

StanChem Polymers SC 6477 is a highly efficient, alkali-swellable acrylic emulsion that is recommended for thickening synthetic emulsions. SC 6477 can be incorporated directly into a binder system. Thickening begins with the addition of ammonia, sodium hydroxide or an amine to raise the pH to 7.0-8.0 for maximum thickening.

StanChem Polymers SC 6508 is an acrylic copolymer emulsion designed for exterior latex paints where wet adhesion is needed. Use of SC 6508 imparts improved adhesion to chalky and weathered surfaces.

StanChem Polymers SC 6261 is a 100% acrylic copolymer emulsion designed for durable house and trim paints. Paints and coatings made with SC 6261, in addition to durability; also exhibit good wet adhesion, good dirt pick-up resistance and good gloss retention.

Redicote 75TX is a emulsifier for coal tar pitch and bitumen based sealers in clay stabilized recipes. Adhesion promoter for cutbacks and industrial products based on bitumen,

Alcosperse 787 is a novel hydrophobically modified acrylic copolymer dispersing agent developed to help formulators create innovative waterborne paints and coatings with excellent performance characteristics over competitive dispersants such as water mark resistance, alkaline and salt resistance, and other related hydrotropic effects. Key Benefits Excellent color acceptance Outstanding pigment dispersing efficiency Strong hydrophobic properties Long shelf life Features Alkali resistance Good storage stability Salt resistance Water mark resistance Water resistance

Bermocoll EBS 481 FQ is a non-ionic, water solublecellulose ether with enhanced enzyme resistance. Itimproves the consistency, the stability, and the waterretention of water-based products.

Bermocoll E 481 FQ is a non-ionic, water soluble cellulose ether. It improves the consistency, the stability, and the water retention of water-based products. Bermocoll E 481 FQ is a high viscosity grade of ethyl hydroxyethyl cellulose.

Bermocoll EBM 5500 is a non-ionic, water soluble cellulose ether with enhanced enzyme resistance. It improves the consistency, the stability, and the water retention of water-based products. Bermocoll EBM 5500 is a high viscosity grade of methyl ethyl hydroxyethyl cellulose.

Bermocoll EHM 200 is an associative non-ionic, water-soluble cellulose ether that improves the rheological properties of water-based paints.

Bermocoll EHM 300 is associative non-ionic, watersoluble cellulose ether that improves the rheological properties of water-based paints.

Bermocoll EM 7000 FQ is a non-ionic, water soluble cellulose ether. It improves the consistency, the stability, and the water retention of water-based products.

Bermocoll Prime 2500 is a non-ionic, water soluble cellulose ether with enhanced enzymatic resistance, and superior color stability. It improves the consistency, the stability, and the water retention of water-based paints.

Ethylan EF-60 is a VOC-free additive used to promote storage stability, especially at low temperatures. It acts as an anti-freezing agent, dispersant, wetting agent and freeze-thaw (FT) stabilizer in premium-grade waterborne latex paints and adhesive systems. Ethylan EF-60 can be used to replace propylene glycol, PEG and EG in these formulations to meet regulatory requirements without compromising on processability and other latex binder performance. Benefits: Lower-odor, safer formulations Better appearance and finish Compliance with environmental regulations High efficacy FT performance for a wide range of waterborne formulations Features: APEO-free VOC-free Excellent FT stability Maintains open time to impart processability Better pigment wetting and dispersion compared to traditional FT agents

Alcosperse 492 is a polyacrylate ammonia salt dispersing agent often used in clay dispersant applications.

Bermocoll EHM Extra is an associative non-ionic, water-soluble cellulose ether that improves the rheological properties of water-based paints.

Narlex LD36V is a sodium salt of an acrylic acid copolymer supplied as an aqueous solution.

Bermocoll EBS 351 FQ is a non-ionic, water soluble cellulose ether with enhanced enzyme resistance. It improves the consistency, the stability, and the water retention of water-based products.

Bermocoll Prime 3500 is a non-ionic, water soluble cellulose ether with enhanced enzymatic resistance and superior color stability. It improves the consistency, the stability, and the water retention of water based paints.

Bermocoll Prime 1500 is a non-ionic, water soluble cellulose ether with enhanced enzymatic resistance and superior color stability. It improves the consistency, the stability, and the water retention of water based paints.

Bermocoll EBS 451 FQ is a non-ionic, water soluble cellulose ether with enhanced enzyme resistance. It improves the consistency, the stability, and the water retention of water-based products.

Bermocoll EHM 500 is a high efficiency associative non-ionic, water-soluble cellulose ether that improves the rheological properties of water-based paints.

Bermocoll Prime 1000 is a non-ionic, water soluble cellulose ether with enhanced enzymatic resistance and superior color stability. It improves the consistency, the stability, and the water retention of water based paints. Bermocoll EBM 10 000 is a low viscosity grade of methyl ethylhydroxyethyl cellulose.

Bermocoll CST 818 is a non-ionic, water soluble cellulose ether with enhanced enzyme resistance. It improves the consistency, the stability, and the water retention of water based products.

Bermocoll EBM 10 000 is a non-ionic, water soluble cellulose ether. It is a high viscosity thickener with enhanced enzyme resistance. It improves the consistency, the stability, and the water retention of water-based products. Bermocoll EBM 10 000 is a high viscosity grade of methyl ethylhydroxyethyl cellulose. At equal amounts it scores a higher Stormer than other high-viscous products used.

Bermocoll E 230 FQ is non-ionic, water soluble cellulose ether. It improves the consistency, the stability, and the water retention of water based products. Bermocoll E 230 FQ is a low viscosity grade of ethyl hydroxyethyl cellulose.

Berol 05 P is a fatty alcohol ethoxylate. It has a very strong hydrophilic (water soluble) character.

Berol 08 Powder is a fatty alcohol ethoxylate. It has a very strong hydrophilic (water soluble) character.

SILRES® BS 333 is a nonionic, solvent-free, water-dilutable emulsion that contains a reactive polysiloxane. It is primarily used as an additive for aqueous indoor paints or coatings to enhance their workability and application properties. When added undiluted to indoor paints, SILRES® BS 333 has a positive impact on the wetting and leveling properties of the paint. This results in a very even and smooth coating, particularly on surfaces exposed to sidelights. The improved wetting and leveling properties achieved with SILRES® BS 333 allow for applications without visible overlap, ensuring a seamless finish.

SILRES® BS 168 is a water-based, solvent-free, and silicone-based pH adjuster that is specifically used in waterborne emulsion paints. It serves the purpose of improving pH adjustment and wet abrasion resistance in paint formulations. This product is particularly suitable for formulating low VOC (volatile organic compound) and low odor paints, meeting the requirements for environmentally friendly and sustainable coating solutions. By using SILRES® BS 168, paint manufacturers can achieve effective pH adjustment while maintaining excellent wet abrasion resistance properties.

GENIOSIL® GF 91 is an alkoxysilane that contains an amino-functional group. It is a clear, colorless to light yellow liquid with a characteristic amine odor. This product finds application in various areas, including building and construction adhesives, do-it-yourself projects, flooring installation, interior paints and coatings, and waterproofing membranes.

NEXIVA® GP 225 is a dispersible polymer powder that primarily consists of vinyl acetate and ethylene. It is specifically formulated as a versatile binder suitable for a wide range of applications across various industries, including coatings and adhesives. However, its potential uses are not limited to these industries alone.

SILRES® BS 290 is a solventless silicone concentrate based on a mixture of silane and siloxane. It can be diluted with organic solvents. Dilute solutions of SILRES® BS 290 in organic solvents are high-quality general-purpose water repellents for impregnating and priming mineral and highly alkaline substrates.

SILRES® IC 701 is an anti-graffiti coating intended for use in the professional market for the protection of concrete, masonry, and metal substrates. The cured coating provides excellent release and ease of removal for permanent markers and aerosol paints. SILRES® IC 701 is based on polysiloxane polymers and provides excellent performance against exterior elements such as rain, sun, and temperature extremes. It cures via the condensation reaction at room temperature by reacting with ambient moisture.