Products in Glazing & Window Elements: Polyesters

Crystic® Polyester Resin 921 is an un-accelerated, orthophthalic, unsaturated polyester resin with a low viscosity to accept the maximum level of filler particles. It has been developed specifically for polymer concrete. Crystic® 921PALV is a lower viscosity, thixotropic version of this product. It is suitable for pigmented castings filled to a low level or not filled at all.

Crystic® Polyester Resin 406COS is a non-thixotropic, non-accelerated, orthophthalic unsaturated polyester resin used for casting, artificial marble, and solid surface applications. This product has a 5-minute gel time. It contains UV absorbers, allowing very good resistance to yellowing and UV radiation.

Crystic® Polyester Resin 397PA is a pre-accelerated isophthalic/neopentyl glycol polyester resin with a high heat deflection temperature and good water and chemical resistance. It is recommended for the fabrication of high-performance laminates for critical applications in aggressive environments. This product is suitable for contact molding and filament winding processes.

Crystic® Polyester Resin U904LVK is an orthophtalic, pre accelerated, non thixotropic, unsaturated polyester resin. It has to be used when good mechanical properties and good heat resistance are required. The product has been designed to be catalysed with a conventional MEKP at 50% while giving a very fast demold time under quite low exotherm.

Domopol 5140 60 SAB/BG ND is a saturated polyester resin developed for coil coating topcoats: interior and exterior architecture. The bio-based content is 18% of the dry matter via a biomass balance (BMB) approach as certified by the ISCC PLUS.Features and Benefits :18% biobased on solid contentExterior and interior architecture

Domopol 5178 70 SA/BG is a saturated polyester resin recommended for coil coating applications such as interior and exterior architecture. This resin can be also used for traffic uses and primers for aluminum. The bio-based content is 29% of the dry matter via a biomass balance (BMB) approach as certified by the ISCC PLUS.Features & Benefits29% biobased on solid contentPaints with higher solid contentVery reactive

Domopol 5157 65 SA/X is a saturated polyester resin designed for coil coatings: top coats with UV - absorption resistance and high durability. The bio-based content is 28% of the dry matter via a biomass balance (BMB) approach as certified by the ISCC PLUS.Features & Benefits28% biobased on solid contentQUV-A stabilityHigh durability coatings

Domopol 5155 55 SA/MPA is a saturated polyester resin designed for BPA-NI food contact interior and exterior can coatings. The bio-based content is 6% of the dry matter via a biomass balance (BMB) approach as certified by the ISCC PLUS.Features & Benefits6% biobased on solid contentBisphenol A non-intent coatingsFully complies with FDA regulationsExcellent sterilization and chemical resistance

Domopol 5201 55 SA/MPA is a saturated polyester resin developed for can coatings; BPA-NI internal coatings. The bio-based content is 5% of the dry matter via a biomass balance (BMB) approach as certified by the ISCC PLUS.Features & Benefits5% biobased on solid contentBisphenol A non-intentInterior and exterior coatings

ISO112 is an isophthalic unsaturated polyester resin type 1140 according to DIN 16946-2. ISO112 is particular indicated in outdoor application.

T19X9 is an orthophthalic unsaturated polyester resin tixotropic, preaccellerated , and catalysis indicator. T19X9 is mostly used in hand lay-up application.

Norsodyne® 3310W has general purpose, excellent water resistance, promoted and waxed version of Norsodyne® 3310. Main applications areas are automotive, building and construction, industrial sector, marine etc.

FINE-CLAD® M-8025 is a hydroxyl-functional polyester. It is designed to cure by urethane cross-linkers where it imparts high hardness, good weather resistance, and excellent stain resistance.

Norsodyne® CMC15100W - orthophthalic resin for marble and onyx, promoted and waxed, low viscosity. Main applications areas are building and construction, industrial sector etc.

DISTITRON® 100 CV2,5 - Unsaturated polyester resin in styrene,DCPD. It is used to produce flat sheets,laminates through hand lay up and spray up method.

NORSODYNE® C 16237 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce abrasives,chips through casting method.

Norsodyne® 21032 - thixotropic, low peak exotherm and low shrinkage, promoted and non-waxed, good water resistance, lloyd's approved. Main applications areas are automotive, building and construction, industrial sector, marine etc.

Far Eastern New Century Corporation BT806 is PET sheet for a variety of applications, including Anti Blocking, Box & Window Grade (Brighter) to live up to the demands worldwide. Far Eastern New Century Corporation is No. 1 APET roll/cutting sheet supplier in Asia and mainly has the pacific area as its customer base.

Erie Powder Coatings P244-G7R Primer Gray OGF TGIC is a dual topcoat / primer, outgas forgiving and it is excellent for liquid topcoat.

Norsodyne® BR-270A - multicolor application, flexible type, thixotropic, good workability, for rods production. Main applications areas are leisure and clothing etc.

NORSODYNE® H 44281 TA - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce marine,boats through hand lay up and spray up method.

DISTITRON® 515 A - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce transparent and corrugated sheets through continuous laminating method.

DISTITRON® 417 DV20 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce agglomerated and engineered stones through casting method.

DISTITRON® 1629 XYQ - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce marine,boats through hand lay up and spray up method.

Polynt Group 10 - Dispersion of high quality pigments in a monomer-free reactive polyester grinding vehicle

EPOVIA RF-2050SE is Chlorendic anhydride (HET acid) based unsaturated polyester resin. Main Applications areas are Building and Construction,Chemical Industry,Industrial sector etc.

NORSODYNE® M 46073 - Unsaturated polyester resin in styrene,Isophthalic. It is used as general purpose in injection molding,rtm method.

DISTITRON® 3559 FV3 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce pipes and tanks.

NORSODYNE® I 13287 AP - Unsaturated polyester resin in styrene,Orthophthalic. It is used as general purpose in injection molding,rtm method.

C.E. Shepherd Company, L.P. Diamond Pattern 92 Gage Embossed Polyester Film decorative patten is comprised of diamond shapes.

Norsodyne® BR-290EXT - multicolor application, thixotropic, good workability, for rods production. Main applications areas are leisure and clothing etc.

Polydyne® 6023 - lamination resin, good adherence to acrylics substrates. Fast cycle curing. Main applications areas are building and construction, composites etc.

DISTITRON® 514 CV2 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce abrasives,chips through casting method.

ENYDYNE® R 61500 T - Unsaturated polyester resin in styrene,DCPD. It is used to produce pipes and tanks.

Polydyne® 6028 - lamination resin, good adherence to acrylics substrates. Fast cycle curing. Main applications areas are building and construction, composites etc.