Products in Other Building & Construction Applications: Epoxy & Epox...

jER™ 1750 is a very low viscosity Bisphenol F-type liquid epoxy resin. It can be used in sealants, casting agents and adhesives in electrical and electronic applications and fiber reinforced plastics, and for liquid underfill and adhesives for semiconductor manufacturing.FeaturesChemical, heat and water resistanceElectrical insulation*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX4000 is a biphenol-type solid epoxy resin with significantly low melt viscosity, low water absorption and a good balance between adhesiveness and rigidity against stress. It can be used for electrical and electronic applications. jERTM YX4000 is an adduct formed from the reaction of epichlorohydrin and tetramethylbiphenol FeaturesAbrasion, heat and water resistanceElectrical insulationWear resistanceProduct HighlightsSignificantly low melt viscosity (melting point: 108°C)Low chroline contentLow water absorption ApplicationsElectrical and electronic applications (EMC, solder resist, PCB)Potting and encapsulation materialsPowder coatings for ship bottomsAdhesivesComposites *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX8040 is a hydrogenated bisphenol A-type solid epoxy resin, with high molecular weight. It can be used for optical materials such as LED encapsulants and adhesives for displays.FeaturesHigh purityTransparencyLED-curableUV-curable *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX8000D is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparencyLED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). Benefits Excellent adhesiveness Maintains high electrical reliability Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Applications Electrical and electronic applications Potting & encapsulation materials Adhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). BenefitsExcellent adhesivenessGood elastic recovery FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)Low viscosityApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

LEEBOND 15-93-1 is a two-part, room temperature curing epoxy adhesive designed for bonding oily steel to various substrates.

ChemSystems Helix Epoxy Bonder is a two-component water-based epoxy primer and moisture barrier. It is an excellent adhesion promoter between Helix cement-based overlay toppings and hard surface substrates. Helix Epoxy Bonder forms an impermeable membrane that acts as a moisture barrier and provides crack suppression properties. It is a slow cure product (24 hours) and is designed to be surface seeded with 90 mesh sand for optimum adhesion properties with any cement-based overlay.

ChemSystems Helix Epoxy Primer is a two component, water-based epoxy primer designed as an adhesion promoter between Helix polymer coatings, cement based overlays, and hard surface substrates. Helix Epoxy Primer acts as a thin build primer, at the same time penetrating the surface of the substrate to provide excellent adhesion.

CeTePox® 200 R is a unmodified Bisphenol F liquid resin.

Armor Plate 999MP Multi-Purpose Epoxy Grout is a three-component, high strength, 100% solids, epoxy grouting compound. It is primarily used to grout large machinery, support sole plates and rehabilitate concrete structures. Armor Plate 999MP exhibits early compressive strength, negligible shrinkage and is resistant to mechanical abuse and corrosive attack. Armor Plate 999MP is an ideal grouting material for use in these and other applications:; Equipment grouting for pumps and compressors Anchor bolt and rebar grouting Repairing spalled concrete Rebuilding concrete curbs Repairing concrete columns and concrete bases Deep pour applications to 12 inches.

Rhino Linings USA, Inc. 3100 Hardener is a Long Pot Life for Civil Engineering.

CHS-EPOXY 571 is a Bisphenol A/F epoxy resin.

Polygem Sinmast 4 Rapid is a fast-setting, fast-curing industrial epoxy formulated for concrete patching and repair. Mix Polygem Sinmast 4 Rapid with sand or aggregates to make epoxy grouts. Polygem Sinmast 4 Rapid is also an excellent choice for fiberglass lay up and laminating applications. Polygem Sinmast 4 Rapid does not contain solvents or toxic styrenes.

CHS-EPOXY 572 is a Bisphenol A/F epoxy resin

Adesiv SRL Euro 5 is a Twocomponent, water-free epoxy-polyurethane adhesive with very low VOC emissions, specific for gluing wooden floors of any type on cementitious substrates or on pre-existing non-absorbent floors (marble, tiles, palladian, wooden substrates). On pre-existing poorly or non-absorbent substrates, always provide for an appropriate abrasion of the surface, followed by adequate cleaning, before proceeding with gluing.

ACCU-GROUT products are three-component, pre-proportioned, industrial grade epoxy grouting systems. ACCU-GROUT is a general construction epoxy. The recommended application temperature range for the grout products is between 60°F - 95°F (16°C - 35°C).

Adesiv SRL Pelpren PL6-G is a two-component epoxy-polyurethane adhesive with single coating for rubber flooring, rubber agglomerate sports fields, athletic tracks, synthetic grass, PVC and LVT.

CHS-EPOXY 531 is a Solvent free system with high chemical resistance to solvents. Solvent free system, low temperature, wet conditions, very fast hardening. Epoxy resin modified with bi-functional reactive diluent.

Bio-Master™ SG-20 is a kind of epoxy-type random copolymer and its appearance is white transparent powder.

Onyx Concrete Coatings Epoxy Flex (Top Coat) is a flexible two component, high performance, cycloaliphatic, 100% solids, urethane modified epoxy overlayment and coating system. Its epoxy chemistry provides excellent bonding characteristics with the additional advantage of flexibility.

Mapefloor I 300 SL TRP is a two-component, transparent, non-yellowing epoxy coatings applied at a thickness of 1 mm for finishing coats on epoxy resin systems.

Triune Chemicals and Materials LE-834 is semi solid type with higher molecular weight which can be widely used in all applications like Coatings, Adhesive, Casting, Composite, Civil Engineering and Electric and electronics fields..

Coating & Binding Technology EMG‐17 / 3K Epoxy Grout is a three component, 100% solids, solvent‐free system formulated to provide high‐strength and superior creep resistance combined with the highest effective bearing area. EMG‐17 provides precise alignment, high impact resistance and oil and chemical resistance to dynamic load equipment foundation applications.

Coating & Binding Technology EMG‐15 / 3K Epoxy Grout is a three component, 100% solids, solvent‐free system formulated to provide high‐strength and superior creep resistance combined with the highest effective bearing area. EMG‐15 provides precise alignment, high impact resistance, and oil and chemical resistance to dynamic load equipment foundation applications. Coating & Binding Technology's Epoxy Machine Grout is a low exothermic epoxy system for machinery grouting.

Eco-PT™ Topcoat is a thickened epoxy with a high solids content that is ideal for sealing an overlay or creating a "orange-peel" texture.

DURACLAD C-304 FS is a fast setting steel putty.

RECKLI Rapid Epoxy Type LS is a solvent-free, liquid-tight, stable two-component mortar, based on epoxy resin. It shows high compressive and flexural strength as well as adhesive strength on concrete. On exposure to direct sunlight or UV irradiation, it is gradually yellowing; however, without degradation of mechanical properties.

ACCU-GROUT products are three-component, pre-proportioned, industrial grade epoxy grouting systems. ACCU-GROUT LE is a low exotherm, high strength construction epoxy. The recommended application temperature range for the grout products is between 60°F - 95°F (16°C - 35°C).

Triune Chemicals and Materials LE-828LV is less crystallize resin which can be widely used in all applications like Coatings, Adhesive, Casting, Composite, Civil Engineering and Electric and electronics fields..

Rhino Linings USA, Inc. 3102 Hardener is a Fast 4:1 Laminating and Tooling Hardener.

Adesilex PG2 is two-component thixotropic epoxy adhesives for structural bonding.

CHS-EPOXY 498 is a Epoxy resin modified with mono-functional reactive diluent.

Foamjet F is ultra rapid setting two-component polyurethane resin with fluid consistency, to be injected for consolidating and waterproofing of structures subject to weal water ingress.

Triune Chemicals and Materials LE-828E is standard BPA type electronics grade which can be widely used in all applications like Coatings, Adhesive, Casting, Composite, Civil Engineering and Electric and electronics fields..

RECKLI Adhesive Paste EP is a slightly thixotropic, solvent-free, two-component adhesive resin for the adhesion of wood, paperboard, natural or synthetic stone, various metals and plastics. Its color is creamy-white.