Products in Carpet & Upholstery

Capitol Adhesives MP240 Mid Grade Carpet and Sheet Vinyl Adhesive is a water-based multi-purpose adhesive for the installation of felt-back sheet vinyl and most carpets in residential or medium commercial installations. Its wet grab is great for carpets but allows alignment of sheet vinyl floors without tearing the back. This product is protected by AMP Guard®, an anti-microbial protection system that inhibits the growth of mold, mildew and odor-causing bacteria in both wet and dry adhesive.

REMIVA PP Black is a Polypropylene chemical delivered in the form of PP pellets.

Plasticizer SC DLC-A is a diester of triethylene glycol, silicon-dioxide blend plasticizer, and softener for NR, SR's. Gives low temperature flexibility; improves processing.

Alpha Adhesives and Sealants Ltd A1020 Quick Grab Latex Adhesive has been formulated as a multi-purpose adhesive for use where quick sealing properties are of advantage. It can be used to bond textiles, papers, packaging materials, etc., to themselves or to one another. It represents the ultimate in quick grab latex adhesives, and is ideal for bonding all fibrous materials to a wide variety of porous substrates. including carpet binding. A1020 is used for a number of operations in the carpet and general textile industries. It can also be used for carton sealing and for miscellaneous fabrications in the packaging trade.

Tar-Cel 30-A is a Tarene, silicon-dioxide blend plasticizer and tackifier for NR, SBR, IR, IIR, and polyisobutylenes. It reduces mill-time over liquid pine tar and gives easier, faster, more accurate weighing.

Envir® PA6G30L-BK0704 is a 30% Glass fiber reinforced Nylon 6 molding resin. 6G30L is an excellent utility grade compound that is optimized for properties, process and economics. It is provided Black in color.

Envir® PA66T2HL-BK0603 is a highly Toughened Nylon 66 molding resin, it is Heat stabilized and Lubricated for high performance and processing. 66T2HL offers a versatile balance of strength and toughness, it is provided Black in color.

Liwang Chemical Nantong LP-9006 fluorescent green is a good heat resistance, maximum temperature up to 300 degrees, no formaldehyde, does not contain any heavy metals in the environment-friendly fluorescent pigments. Applicable to the processing temperature higher than 200 degrees of masterbatch and injection type of all kinds of plastic products.

Safron® H510 - 02 polypropylene resin is suitable for extrusion, general purpose injection and blow molding. It offers good processability and low water carry-over, as required when water baths are used during processing. Safron® H510-02 Polypropylene Resin offers good tenacity and low fibrillation.

PETOL 250-2 is a high purity polyoxypropylene glycol, 400 molecular weight. PETOL 250-2 is a diol homopolymer and the product is not acidified.

DYNOFOAM KOL is an economical silicone based defoamer which can be employed in dyehouses to suppress the foam formation that is normally encountered in carpet and textile processing. DYNOFOAM KOL can also be employed in effluent treatment processes to eliminate foam in ditches and treatment ponds.etc.

PETOL 56-2LM is a PPG, with a molecular weight of 2000, with low unsaturation, synthesized with double metal cyano complex catalyst.

Kolokan Color Masterbatches for Nylon Fiber/Yarn/Non-Woven belongs to fiber color masterbatch category.

BNX 1098 (23128-74-7)is an antioxidant that provides excellent processing and long term thermal stability in polyamide (nylon) polymers and fibers and in other materials, including other polymers, elastomers, and adhesives.

KPC® KLC-55 by Kadakia Plastics and Chemicals is a general purpose, flexible polyvinyl chloride (PVC) grade. Is suitable for processing by profile extrusion. Possible applications of KPC® KLC-55 could be complex profiles & shapes, sleeving, hose tubing, tapes & fiber coating and molding applications such as electrical plugs, handles and intricate parts.

Ultramarine is the main pigment used in Nylon 508.

Natro-Cel 1312-A is a nitrile rubber, silicon-dioxide blend plasticizer for nitrile rubber compounds requiring improved flow and knitting. It is non-extractable, non-staining, and usually used at 5-14 parts. Its effect on cure can be ignored. At higher levels additional sulfur or accelerator may be necessary (0.5 sulfur per 10 parts liquid Nipol 1312).

Marshall Additive Technologies SDAOM 100% Ammonium Octamolybdate smoke suppressant.

Petol C 2106 is a polyol blend formulated for the manufacture of fireproofing rigid polyurethane foams, blown with water. This polyol blend includes surfactant and fireproofing agent.

Liwang Chemical Nantong LP-9011 fluorescent red is a good heat resistance, maximum temperature up to 300 degrees, no formaldehyde, does not contain any heavy metals in the environment-friendly fluorescent pigments. Applicable to the processing temperature higher than 200 degrees of masterbatch and injection type of all kinds of plastic products.

deflammo ff combines standardized fire safety and first-class comfort in a high-tech product. Parts made from Eurofoam deflammo FF are certified in accordance with ÖNORM A3800 B1 (flame-retardant) and Q1 (low-smoke). At the same time, deflammo fulfills the most important European and international fire standards such as ÖNORM A3800 B1, Q1, BS 5852 Crib 5 or MVSS 302 (DIN 75200.

POLYTONE™ AP 108 is a heat reactive alkyl phenolic resin formulated for use in the manufacture of contact adhesives / cements based on polychloroprene or other elastomers.

Domamid® L 66Y10 is polyamide 66, improved triboligial properties, with MoS2, is used for injection molding.

FlameAway II™ 169 is an aqueous based coating / retardant for synthetic fabrics or blends, such as acrylic, rayon and cotton blends. For interior use only.

Perylene is the main pigment used in Polyester 305.

Domamid® 66G40H1 NC by DOMO Chemicals is comprised of Polyamide 66. It is commonly used Domamid® 66G40H1 NC is certified as UL Flame Rated.

Econamid® FL 66G15 by DOMO Chemicals is comprised of Polyamide 66. It is commonly used Econamid® FL 66G15 is certified as UL Flame Rated. It is available in Solid form.

ATLASOL® 170 is a specially compounded fatliquor for snow-white alum tanned leather. Atlasol 170 is based on emulsified neatsfoot oil, refined coconut oil and synthetic oils. A blend of this nature possesses an excellent electrolyte stability, provides even uptake and imparts to the leather an excellent whiteness.

Petol PP 201 is a non-reactive polymer polyol, with a content of about 20% solid substance and with 3500 average molecular weight of base polyol, designed for the production of high hardness flexible slabstock foams. It is a BHT-free product and can be used with or without auxiliary blowing agent to produce a wide range of foam grades, from low to high density.

Capitol Adhesives MP100 Basic Carpet and Sheet Vinyl Adhesive is a water-based multi-purpose adhesive for the installation of felt-back sheet vinyl and most carpets in residential or medium commercial installations. Its wet grab is great for carpets but allows alignment of sheet vinyl floors without tearing the back. This product is protected by AMP Guard®, an anti-microbial protection system that inhibits the growth of mold, mildew and odor-causing bacteria in both wet and dry adhesive.

Liwang Chemical Nantong Organic pigments benzidine yellow Gare used in Water-based ink, green phase.

Solprene 1205 is a linear random-block styrene-butadiene copolymer with a total content of 25% of styrene, 17.5% is present as a polystyrene block.It has a non-staining antioxidant system; FDA approved for use in food contact applications. Is essentially gel free with a clear color.Solprene 1205 is an excellent modifier for asphalt, formulations of caulks and sealants; it is also an excellent processing aid for most polymers, giving a good resistance to low temperature. Used in extruded goods, soles and heels. It can also be used as modifier for thermoplastic resins and in adhesive formulations.

Grand Rapids Foam Technologies Gel Foam is commonly used in mattresses and other sleep products, and for good reason. As a topical component, it’s noted for its cooling features, as the gel both promotes the flow of air and dissipates body heat, allowing sleepers to maintain a comfortably cool temperature throughout the entire night.

Tatrafan REGRANULATE ON2 is made from waste of clear polypropylene film. Regranulate has the lentils shape, with the dimension 3-7 mm, and clear-natural color. The regranulate is suitable for further processing into technical plastic products and consumer plastic items by injection molding, pressing or extrusion technology. Each customer is required to check, this material for the intended use.

Liwang Chemical Nantong LP-9007 fluorescent purple is a good heat resistance, maximum temperature up to 300 degrees, no formaldehyde, does not contain any heavy metals in the environment-friendly fluorescent pigments. Applicable to the processing temperature higher than 200 degrees of masterbatch and injection type of all kinds of plastic products.

Vibrant Colortech Black fiber VB 9037-P is based on PE, PP, ABS, EVA and other base polymers. The product range comprises specially selected carbon blacks for high jetness, food contact approval and for better dispersion.