Products in Other Devices & Assemblies: Lawn Equipment

TPE-S, Shore A45, modified for good adhesion to polyamides such as PA6, PA66, PA612 or partially aromatic PA types such as GRIVORY GV (manufacturer EMS-GRIVORY). KEBAFLEX - H / SPA1 40 A.02 black is UV-resistant and therefore also suitable for outdoor applications, for example in the automotive sector.

BARLOG plastics GmbH Kebablend® / MW FE 181101 TPE is a development product based on TPE for the production of soft magnetic components. The material has a Shore A 80 hardness.

TPE-S, Shore A68, modified for good adhesion to polyamides such as PA6, PA66, PA6.12 or partially aromatic PA types such as GRIVORY GV or GRIVORY HT (manufacturer EMS-GRIVORY).

BARLOG plastics GmbH Kebablend® / MW 24.1200 PE is a product based on PE for the production of soft magnetic components. The achievable permeability is <5 (at 1MHz) and the saturation flux density is <300 mT.

POM copolymer unreinforced, medium viscosity, tribologically modified, optimized sliding and wear behavior

TPE-S, Shore A54, modified for good adhesion to polyamides such as PA6, PA66, PA12 or partially aromatic PA types such as e. g. GRIVORY GV (manufacturer EMS-GRIVORY)

BARLOG plastics GmbH Kebablend® / WR XB 111001/12 is a special compound based on POM, which has very good sliding behavior and high wear resistance. The material is also characterized by noise-dampening properties.

TPE-S, Shore A60, black, improved compression set at high temperatures

TPE-S, Shore A75, black, modified for good adhesion, etc. ABS and PMMA.

PBT-GF30 FR, PBT, 30% glass fiber reinforced, flame retardant, halogen free

BARLOG plastics GmbH Kebaflex® / FE 170403 is a TPE-S, Shore A85, modified for good adhesion to various polyamides such as PA6, PA66, PA6.12, etc. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

POM-MD30, POM copolymer unreinforced, medium viscosity, 30% mineral-reinforced

POM-MD30, POM copolymer, medium viscosity, 30% mineral-reinforced

POM copolymer unreinforced, medium viscosity, tribologically modified, optimized sliding and wear behavior

PBT-GF20, PBT, 20% glass fiber reinforced, approved for use in food contact

POM-I, POM copolymer unreinforced, medium viscosity, impact modified

TPE-S, Shore A75, modified for good adhesion to polycarbonate

POM-I, POM copolymer unreinforced, medium viscosity, impact modified, reduced emissions for automotive interior applications

BARLOG plastics GmbH Kebaflex® / U A90 ST B01 is a TPU with a Shore hardness of A 90. It is characterized by high flexibility and very good wear and abrasion resistance.

PBT-GF30 FR, PBT, 30% glass fiber reinforced, flame retardant

BARLOG plastics GmbH Kebablend® / M FE 190401 TPE (black) is a development product based on TPE for the production of injection molded magnets. The material has a Shore A 82 hardness.

POM-CF20, POM copolymer, medium viscosity, carbon fiber reinforced, electrically conductive

BARLOG plastics GmbH Kebablend® / WR XB 111001/2 is a special compound based on POM, which has very good sliding behavior and high wear resistance. The material is also characterized by noise-dampening properties.

POM copolymer unreinforced, medium viscosity, electrically conductive

PPS functional compound for the production of plastic-bonded magnets

KEBABLEND / H 38.1900 EEA is a functional compound based on EEA with high density.

TPE-S, Shore A60, natural, modified for good adhesion to ABS, PC and ABS / PC blends

PA12 functional compound for the production of plastic-bonded magnets

BARLOG plastics GmbH Kebablend® / WR 02/2110 is a special compound based on POM homopolymer, which has very good sliding behavior and high wear resistance. The material has medium strength and a high elongation at break and, compared to POM copolymer, an increased melting temperature and heat resistance.

BARLOG plastics GmbH Kebaflex® / SG 85 HT A.01 is a TPE-S, Shore A85, with improved compression set at high temperatures. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

PBT + PC, PBT / PC blend, unreinforced, impact resistant, reduced tendency to warp

BARLOG plastics GmbH Kebablend® / MW FE 190701 PA12 is a development product based on PA12 for the production of soft magnetic components. The achievable permeability is 18 (at 1MHz).

TPE-S, Shore A55, black, modified for good adhesion, etc. On ABS, PC and PC / ABS blends.

TPE-S, Shore A67, natural, modified for good adhesion, etc. On ABS, PC and PC / ABS blends, compliant for food contact according to EU 10/2011.

POM copolymer unreinforced, very low viscosity

TPE-S, Shore A63, translucent, food compliant according to EU 10/2011 and FDA