Products in Other Devices & Assemblies: Lawn Equipment

POM copolymer unreinforced, very low viscosity

TPE-S, Shore A79, natural, modified for good adhesion, etc. On PBT and PBT blends. KEBAFLEX - H / SPBT 70 A.02 natural was developed specially for use outdoors (UV stabilization) and has an optimized demolding behavior.

BARLOG plastics GmbH Kebablend® / MW 39.1500 PPA is a product based on PPA for the production of soft magnetic components. The achievable permeability is approx. 60 (at 1 MHz) and the saturation flux density is approx. 430 mT.

TPE-S, Shore A55, black, modified for good adhesion, etc. On ABS, PC and PC / ABS blends.

TPE-S, Shore A67, natural, modified for good adhesion, etc. On ABS, PC and PC / ABS blends, compliant for food contact according to EU 10/2011.

TPE-S, Shore A45, modified for good adhesion, etc. On PBT, PC and PC / ABS blends.

BARLOG plastics GmbH Kebaflex® / U A85 ST C01 is a TPU with a Shore hardness of A 85. It is characterized by its excellent flowability and is also suitable for thin-walled components. Kebaflex® / U A85 ST C01 is very resistant to hydrolysis, flexible at low temperatures and resistant to microorganisms,.

BARLOG plastics GmbH Kebablend® / EC FE 170603/4 (DB) is a dry blend material based on PA 6.6 with excellent electrical conductivity. The material was developed specially for applications in the field of electrical engineering and is very well suited for shielding electromagnetic fields. There is great application potential in the substitution of metal housings (metal replacement / lightweight construction) with regard to the EMC-compliant component design. As a housing material, Kebablend® / EC FE 170603/4 offers the advantage of electromagnetic shielding even in the high-frequency range, without additional surface treatments.

PBT + PC, PBT / PC blend, unreinforced, impact resistant, reduced tendency to warp

PBT + PET, 30% glass fiber reinforced, suitable for contact with food (EU)

BARLOG plastics GmbH Kebablend® / WR 01/1125/2110 is a special compound based on POM that combines high strength and rigidity with good sliding behavior and high wear resistance.

POM-MD30, POM copolymer, medium viscosity, 30% mineral-reinforced

TPE-S, Shore A60, black, improved compression set at high temperatures

POM copolymer unreinforced, medium viscosity, tribologically modified, optimized sliding and wear behavior

TPE-S, Shore A75, black, modified for good adhesion, etc. ABS and PMMA.

PBT-GF20, PBT, 20% glass fiber reinforced, approved for use in food contact

POM-MD30, POM copolymer unreinforced, medium viscosity, 30% mineral-reinforced

BARLOG plastics GmbH Kebablend® / WR 01/2202 is a special compound based on POM, which has very good sliding behavior and high wear resistance. The material has medium strength and a very high elongation at break.

PA12 functional compound for the production of plastic-bonded magnets

PBT-GF30 FR, PBT, 30% glass fiber reinforced, flame retardant, halogen free

BARLOG plastics GmbH Kebaflex® / FE 170403 is a TPE-S, Shore A85, modified for good adhesion to various polyamides such as PA6, PA66, PA6.12, etc. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

Southland Polymers ABS 780 is a High flow Acrylonitrile Butadiene Styrene. It can be used in Electronics, Household appliances, Miscellaneous goods.

KEBABLEND / WR XB 111001/5 is a special compound based on POM, which has very good sliding behavior and high wear resistance.

POM-I, POM copolymer unreinforced, medium viscosity, impact modified

TPE-S, Shore A75, modified for good adhesion to polycarbonate

PPS-GF40, linear PPS, 40% glass fiber reinforced, approved for food applications according to EU and FDA guidelines.

Functional compound for the production of plastic-bonded magnets based on EEA

PPS-GF40, linear PPS, 40% glass fiber reinforced

PA12, functional compound for the production of plastic-bonded magnets. Due to the high degree of filling with rare earths, KEBABLEND / M 48/67 PA12 enables the injection molding of very powerful magnets.

TPE-S, Shore A70, also suitable for extrusion, food compliant according to 10/2011 EG

PA6 functional compound for the production of plastic-bonded magnets

BARLOG plastics GmbH Kebaform® / C 25 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Kebaform® / C 25 H improves the sliding and wear behavior solely by modifying the polymer chain and there is no reduction in mechanical properties due to the addition of tribologically active additives. Due to its property profile, Kebaform® / C 25 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

PPS-MD60, linear PPS, 60% mineral filled, good surface quality

BARLOG plastics GmbH Kebaform® / C 130 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Due to its property profile, Kebaform® / C 130 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow any compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

BARLOG plastics GmbH Kebaflex® / SG 85 FR A.01 black is a product for the production of flexible, flame-retardant components. It has a Shore hardness of 88 A and achieves V0 classification from a wall thickness of 3.0 mm based on the UL 94 test standard.

TPE-S, Shore A55, natural, modified for good adhesion to polyamides such as PA6, PA66, PA6.12 or partially aromatic PA types such as e.g. GRIVORY GV or GRIVORY HT (manufacturer EMS-GRIVORY)