Products in Other Devices & Assemblies: Very Good Heat Resistance

KEBATRON L 2040G3 is a linear PPS with reduced chlorine content that also is reinforced with 40% fiber glass filling.

Smooth-Cast™ ONYX™ SLOW is a mercury-free urethane resin that cures at room temperature to a deep black, solid plastic. ONYX™ resins offer the convenience of a 1A:1B by volume mix ratio and have very low viscosities, so they are easy to mix and pour. ONYX™ resins have an ultimate Shore hardness of 80D and offer higher physical properties and higher heat resistance vs. other general purpose resins. ONYX™ resins are available in 2 speeds. ONYX™ FAST resin has a pot life of 2.5 minutes and a cure time of 10-15 minutes, while ONYX™ SLOW has a pot life of 5 minutes and a cure time of 90 minutes.

KEBATRON C 2065X3 is a crosslinked PPS with reduced chlorine content that also is reinforced with 40% fiber glass filling or mineral fiber.

Polyarn bv PES - PolyEtherSulphone is known for its toughness and stability at high temperatures. Due to the high cost of raw materials and processing, polysulfones are used in specialty applications and often are a superior replacement for polycarbonates. Three polysulfones are used industrially: polysulfone (PSU), polyethersulfone (PES) and polyphenylene sulfone (PPSU). They can be used in the temperature range from -100 to +200°C and are used for electrical equipment, in vehicle construction and medical technology. Polysulfones have outstanding resistance to heat and oxidation, they are hydrolysis resistant and have good electrical properties.

Polysciences, Inc. Cyclic Olefin Copolymer, HDT= 75°C is a high transparency, low specific gravity, high heat resistant and have excellent optical properties and superior water vapor barrier characteristics. Combined with outstanding stiffness/ strength and favorable sterilization properties, they have found applications ranging from FDA approvals for pharmaceutical and food applications to optical applications and electronics materials. Whether used by itself or as a modifier for other resins, the ethylene-norbornene copolymer offers the optical clarity of polymethylmethacryate (pMMA), the heat resistance of polycarbonate (PC) and superior dimensional stability.

TPSC Asia Pte Ltd. HIPS 2551 is a high heat resistant, high rigidity polystyrene for injection molding application. It is recommended for manufacturing of articles which require good stiffness.

KEBATRON C 1065X1 is a cross-linked and reinforced design with 65% fiberglass or mineral filler.

POLYKING® polypropylene material, has excellent comprehensive properties, chemical stability, easily molding and very high cost-effective. It is widely used in electronic/electrical appliance, automotive, home appliance, sport/ leisure equipment, industry/ mechanical, furniture etc. fields.

KEBATRON L 1040G3 is a linear PPS and reinforced design with 40% glass fiber fillings.

Kaofu Chemical HPS-850S is used for making of injection,pc peripheral appliances,electrical appliances, office machine .

KEBATRON C 2040G5 is a crosslinked PPS with reduced chlorine content that also is reinforced with 40% fiber glass filling.

Polyarn bv PPS - PolyPhenylene Sulfide is one of the most important high temperature thermoplastic plastics because it exhibits a number of desirable properties. PPS properties include resistance to: heat, acids, sunlight and abrasion. The material absorbs only small amounts of solvents and it resists dying. An easy way to identify the compound is by the metallic sound it makes when struck.

KEBATRON L 1065X3 is a is a linear PPS and reinforced design with 65% fiberglass or mineral filler.

P & P Technology Fire Retardant Nickel Graphite Silicone EC-Q-FR has good resistance to heat, moderate chemicals & oils, sea water, acids, fats, greases, many solvents & ozone. It also has good flame retardant properties.

KM-Polycarb 2031-50 resin is designed for extrusion and injection molding products. It exhibits an excellent physical property balance of heat resistance, transparency and impact strength.

This ABS resin offers superior heat resistance, shock resistance, and outstanding workability. It has wide-ranging use in items such as automotive parts, and electrical devices.

VYPET™ VNT-2530 BK is an injection moldable, black, 30% glass-reinforced polybutylene terephthalate (PBT) /polyethylene terephthalate (PET) compound non-halogenated flame retardant grade designed for electrical applications. Minimum 25% post-consumer recycled content (Ocean-bound PET).

Kyflon™ 3084 represents a true advancement in perfluoroelastomer chemistry. It offers a combination of very high heat resistance in all conditions including steam up to 300° C.

TPSC Asia Pte Ltd. HIPS 3351 is a high heat resistant, easy flow polystyrene for injection molding application. It is recommended for manufacturing of articles which require good dimensional stability at elevated temperatures.

Polyoxymethylen +25% fiber glass abbreviated as POM+GF25 used in Automotive, Terminal Blocks, Plugs & Sockets applications.

KEBATRON C 1040G5 is a cross-linked PPS and reinforced design with 40% glass fiber fillings.

Polysciences, Inc. Cyclic Olefin Copolymer, HDT= 130°C is a high transparency, low specific gravity, high heat resistant and have excellent optical properties and superior water vapor barrier characteristics. Combined with outstanding stiffness/ strength and favorable sterilization properties, they have found applications ranging from FDA approvals for pharmaceutical and food applications to optical applications and electronics materials. Whether used by itself or as a modifier for other resins, the ethylene-norbornene copolymer offers the optical clarity of polymethylmethacryate (pMMA), the heat resistance of polycarbonate (PC) and superior dimensional stability.

POLYKING® polypropylene material, has excellent comprehensive properties, chemical stability, easily molding and very high cost-effective. It is widely used in electronic/electrical appliance, automotive, home appliance, sport/ leisure equipment, industry/ mechanical, furniture etc. fields.

POLULIT® 1005 is applied in E/E parts, Power tool, Office supplies.

Kaofu Chemical HPS-850HG is used for making of injection,pc peripheral appliances,electrical appliances, office machine  .

Polyoxymethylen abbreviated as POM.

Polysciences, Inc. Cyclic Olefin Copolymer, HDT= 170°C is a high transparency, low specific gravity, high heat resistant and have excellent optical properties and superior water vapor barrier characteristics. Combined with outstanding stiffness/ strength and favorable sterilization properties, they have found applications ranging from FDA approvals for pharmaceutical and food applications to optical applications and electronics materials. Whether used by itself or as a modifier for other resins, the ethylene-norbornene copolymer offers the optical clarity of polymethylmethacryate (pMMA), the heat resistance of polycarbonate (PC) and superior dimensional stability.

Global PP-1111-R Polypropylene Homopolymer has transparency, high stiffness, high heat resistant.

POLYKING® polypropylene material, has excellent comprehensive properties, chemical stability, easily molding and very high cost-effective. It is widely used in electronic/electrical appliance, automotive, home appliance, sport/ leisure equipment, industry/ mechanical, furniture etc. fields.

Smooth-Cast™ ONYX™ FAST is a mercury-free urethane resin that cures at room temperature to a deep black, solid plastic. ONYX™ resins offer the convenience of a 1A:1B by volume mix ratio and have very low viscosities, so they are easy to mix and pour. ONYX™ resins have an ultimate Shore hardness of 80D and offer higher physical properties and higher heat resistance vs. other general purpose resins. ONYX™ resins are available in 2 speeds. ONYX™ FAST resin has a pot life of 2.5 minutes and a cure time of 10-15 minutes, while ONYX™ SLOW has a pot life of 5 minutes and a cure time of 90 minutes.