Products in Other Devices & Assemblies

TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries. TRIREX 3026B(Q) is a polycarbonate resin grade which has high low temperature impact strength in combination with superior mechanical and physical property.Characteristics: Superior low temperature impact resistance Good flow-ability Workable under a wide range of temperatures (-100 °C ~ 135 °C) High electrical performance Good dimensional stability Low moisture absorbency Good weather resistance Applications: TRIREX 3026B(Q) resin grade is used for extrusion blow molding components. High viscosity. Transparent colors only.

Fainplast Compounds PVC FK 86/10 is comprised of Polyvinyl Chloride. It is commonly used for a variety of applications. .

Ultimaker PP (polypropylene) is durable. It has high toughness,exceptional fatigue resistance, and low friction. It also has good chemical,temperature, and electrical resistance. PP is one of the most widely usedplastics on the planet. From electrical components to living hinges, PP isthe go-to material for prototyping and end-use products.

Toray Ecodear® V751X53 is a Polylactic Acid (PLA) product. It is available in Asia Pacific, Europe, or North America. Characteristics includes flame rated, eco-friendly/green and impact resistant.

Armamid™ PA GF 40-1 by Polyplastics Group is comprised of Polyamide (unspecified). It is commonly used It is available in BMC - Bulk Molding Compound form.

Polyamide 6 general purpose

The Perflex SA-55BE(B) is a high performance thermoplastic elastomers- SEBS (Styrene- Ethylene / Butylene-Styrene) copolymer compounding. Perflex SA-55BE(B) is designed for over-molding on ABS, PC, PC/ABS, PMMA and PBT engineering Plastic . Perflex SA-55BE(B) is the most premium material on the criteria of mechanization-Heat Stabilization, weather resistance, UV Stabilization, Flexibility and Comfortable. This grade of Perflex TPE is shear dependent and can be processed on conventional thermoplastics equipment for injection molding or extrusion. It's a soft, elastomeric polyolefine based, completely recyclable, colourable & non-hygroscopic thermoplastics elastomer.

Sylvin™ 9067-80 Orange 587 is a vinyl compound formulated for injection molding applications. This compound has a underwriters laboratories listing as a recognized component.

EnCore™ F0803U by EnCom Polymers is comprised of Acrylonitrile Butadiene Styrene. It is commonly used EnCore™ F0803U is certified as UL Flame Rated.

Nanoshel Carbon Nanotube Masterbatches PA66 CNT is a polymer carbon nanotube masterbatch.

Sylvin™ 9067-90 Red 6115 is a vinyl compound formulated for injection molding applications. This compound has a underwriters laboratories listing as a recognized component.

Flame-retardant V-0, UL746C: f1

PBT-GF30 FR, PBT, 30% glass fiber reinforced, flame retardant, halogen free

RGP is a Nylon 66 Unfilled General Purpose

RIALENE P 101 SGF10plus ST natur is in Granules, Natural Color. RIABLEND ® product line includes all plastic compounds that consist of at least two polymers. On the one hand, we combine polymers that can be easily combined with one another due to their chemical structure. On the other hand, our blends are also polymers that would not necessarily go together straight away, which we combine using a compatibilizer. With our egg-laying wool milk sow, you have a multitude of possible combinations - and thus also various properties of the plastics - at your disposal.

TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries. TRIREX 3020U) is a polycarbonate resin grade which has high low temperature impact strength in combination with superior mechanical and physical property. CHARACTERISTICS Superior low temperature impact resistance Good flow-ability Workable under a wide range of temperatures (-100°C ~ 135°C) High electrical performance Good dimensional stability Low moisture absorbency Good weather resistance APPLICATIONS TRIREX 3020U resin grade is used for Injection molding products. UV stabilized. Low viscosity. Transparent colors only.

Sylvin™ 7833-90 Yellow 405 is a vinyl compound formulated for electrical molding applications.

Cosmoplene® AY564 by The Polyolefin Company (TPC) is comprised of Polypropylene (unspecified). It is commonly used Cosmoplene® AY564 is certified as UL Flame Rated.

Sindustris ABS LAF423T is a flame Retardant.

Toray Siveras™ LX70M30H is a Liquid Crystal Polymer (LCP) product filled with 30% glass\mineral. It is available in Asia Pacific, Europe, or North America. Characteristics includes flame rated, good toughness, high flow and warp resistant.

Sylvin Technologies Sylvin™ 7843-70 White 1624 is a vinyl compound that has a UL listing as a recognized component with a UL 94 V0 flame rating at a thickness of 2.0 mm. The dielectric strength of this compound is 500 volts/mil.

Grupa Azoty S.A Tarnoform® 300 GF3 is a 15% glass fibers reinforced injection-molding grade with increased strength and stiffness and reduced shrinkage and coefficient of linear thermal expansion.

Pentamid B GV35 H RC black is a normal viscosity, heat stabilized polyamide 6, 35% glass fiber reinforced.

POLYKING® Polyamide engineer plastic is not only super high strength and high rigidity, but also has very excellent heat stability and chemical resistance. It shows very excellent stability on different kinds of oil compounds and has excellent electrical property. It is widely used in electrical and electronic, automotive, communication, mechanical engineer, sport apparatus etc..

TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries. TRIREX 3027U(H) is a polycarbonate resin grade which has high low temperature impact strength in combination with superior mechanical and physical property.Characteristics: Superior low temperature impact resistance Good flow-ability Workable under a wide range of temperatures (-100 °C ~ 135 °C) High electrical performance Good dimensional stability Low moisture absorbency Good weather resistance Applications: TRIREX 3027U(H) resin grade is used for Injection molding components. UV stabilized. Medium high viscosity. Transparent colors only.

Tarnamid® T- 27 MW 30 is a 30% mineral filled polyamide 6 compound, heat stabilized.

Karntner Montanindustrie Micro 12H is a calcium inosilicate mineral (CaSiO3) that may contain small amounts of iron, magnesium, and manganese substituting for calcium.

Resinoid 1328 is a glass reinforced, two-step phenolic molding compound. It was specifically developed for applications requiring exceptional tensile strength such as grinding wheels. Resinoid 1328 exhibits excellent electrical and thermal properties as well as dimensional stability. This material comes in pelletized from and is suitable for injection, transfer or compression molding. It can be preformed on automatic equipment.

Mar-Bal MB4000 is a best high track resistant material. A flame retardant polyester molding compound with moderate strength, excellent electrical properties and exceptional arc and track resistance.

Sylvin Technologies Sylvin™ 9684-85 Clear Orange 5118 is a vinyl compound formulated with a non ortho phthalate plasticizer for applications that require an alternative to DOP/DEHP plasticizer. This compound is suitable for extrusion or injection molding applications.

TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries. TRIREX 3020IR is a polycarbonate resin grade which has high low temperature impact strength in combination with superior mechanical and physical property. CHARACTERISTICS Superior low temperature impact resistance Good flow-ability Workable under a wide range of temperatures (-100°C ~ 135°C) High electrical performance Good dimensional stability Low moisture absorbency Good weather resistance APPLICATIONS TRIREX 3020IR resin grade is used for electric and electronic applications, food contact materials and etc. Low viscosity. Transparent colors only.

OpteSTAT™ master batches are Ovation Polymers' line of nano-compounds based on carbon nanotubes. Our proprietary dispersion technology debundles and disentangles carbon nanotubes without compromising their integrity. OpteSTAT™ compounds exhibit good conductivity at minimal nanotube loadings, achieving exceptional cleanliness and physical property retention.OpteSTAT™ NC PES 6010 is Polyether Sulfone-based carbon nanotube compound. The material resistivity can be tailored to the application, while retaining the physical and thermal properties of the base polymer.Target applications include components of disk drives, business machines or other electronic assemblies where ESD control is required while retaining exceptional cleanliness, dimensional control and physical properties.

Sylvin™ 9077-90 Gray 9450 is a vinyl compound formulated for injection molding applications. This compound has a underwriters laboratories listing as a recognized component.

PA12 functional compound for the production of plastic-bonded magnets

Shenzhen Xinghua Pigment Masterbatch Pigment Yellow 13 is yellow colored disazo pigment. It provides high heat resistance, excellent light fastness and very good migration resistance. Pigment Yellow 13 is designed for PE, PP, EVA, POM and PVC. This grade can be used in rubber.