Products in Other Parts & Components

GuangDong ShunDe LuHua Photoelectric New Material Industrial LH-PP633 is suitable for injection molding plastic parts, casters, pallets, pallets, remote control parts, making various blister containers.

AFT Fluorotec AF201 Carbon Filled PTFE is the addition of carbon to PTFE increases the compressive strength and wear resistance. It provides good thermal conductivity and low permeability. Commonly used in sealing applications.

Standard, Flame retardant

SGMS28 is a Nylon 6 Unfilled Lubricated with MoS2.

A soft, black copper stabilized halogen free flame retardant (HFFR) thermoplastic vulcanizate, TPV (EPDM/PP) with superior UV – Ozone resistance.

KEBABLEND / WR 01/2120 is a special compound based on POM, which has very good sliding behavior and high wear resistance.

Liquid-O-Ring® 153M is a multipurpose grease manufactured with molybdenum disulfide. 153M Molygard offers increased protection against mechanical shear. It contains rust and corrosion additives as well as oxidation inhibitors enhancing the performance of this multipurpose grease. 153M Molygard contains extreme pressure additives for increased load carrying capabilities and anti-wear properties for effective performance under high load conditions. With a dropping point of 352°F (177°C), 153M Molygard is recommended for applications requiring stability, and where high-temperature and film forming properties are required.

Pentamid A CV20 H black is a normal viscosity, heat stabilized polyamide 66, 20% carbon fiber reinforced.

TRIBIT® 1500GN30 is a Polybutylene Terephthalate (PBT) product. It is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Flame Retardant

Polifil® GFRMPPCC series compounds are high impact polypropylenes reinforced with chemically coupled glass fibers. This combination provides higher impact strength while retaining high stiffness. These compounds are used in appliances, electrical components, automotive and utility products. Standard processing techniques are applicable. Use this information as a guide to aid you in selecting the proper resin for your application. TPG will custom compound and fine-tune our formulations for your application.

Grupa Azoty S.A Tarflen® SM-K22G3 is a Polytetrafluoroethylene (PTFE) material filled with 22% coke and 3.0% graphite fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America.Important attributes of Tarflen® SM-K22G3 are: Chemical Resistant Flame Retardant Wear Resistant Weather Resistant Typical applications include: Engineering/Industrial Parts Coating Applications Hose/Tubing Plumbing/Piping/Potable Water Sealing Applications

POLIMAXX®HI630 is a high gloss high impact grade of polystyrene resin for injection molding applications requiring superior impact and gloss. It is recommended for electrical appliances (air conditioning parts, TV), household products, sanitary ware, toys and etc.

Nylon 6 A1030SR is a high cycle grade with medium viscosity. It is used for injection molding applications.

Ultra Purge™ 1001 product is recommended by major machine and colorant producers as the most cost-effective and efficient solution for cleaning plastic processing machines. Contaminants are safely ejected without harming the screw, barrel or hot runner. Expanding agents in most Ultra Purge™ product allow the material to clean even the hardest-to-reach areas inside your machines. Ultra Purge™ is effective for color changes, material changes and the removal of black specks. Ultra Purge™ works at the processing temperature of the production material.

Grupa Azoty S.A Tarflen® SM-G20 is a Polytetrafluoroethylene (PTFE) material filled with 20% graphite powder. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America.Important attributes of Tarflen® SM-G20 are: Chemical Resistant Flame Retardant Wear Resistant Weather Resistant Typical applications include: Engineering/Industrial Parts Coating Applications Hose/Tubing Plumbing/Piping/Potable Water Sealing Applications

Ultrasint X028 produce end-use functional parts with high mechanical properties and toughness. Farsoon considers material to part of its core competency. Farsoon’s experienced material department has independently developed a portfolio of polymer materials for additive manufacturing. In addition Farsoon’s fully capable material manufacturing is able to vertically control the production of the material from raw material to finished product, ensuring quality and stability. With excellent color stability, oxidation resistance, Farsoon polymer materials produce high quality parts which provide both detailed surface precision and high mechanical properties. In addition Farsoon partners with many material suppliers to bring new and advanced materials to the users through Farsoon’s open material policy.

DynaStar™ 77350-9000 contains applications such as tourniquets, tubing, bumpers, covers, plungers etc.

S&E Polymer Solutions V-TEM 100 are plasticized polymers with a range of durometers and toughness to meet various material requirements.

Antioxidant-1076 can be widely used for PE、PP、POM、ABS resin、PS、polyvinyl alcohol, engineering plastics, synthetic rubber and petroleum products.

Kotex K-20MRA Polycarbonate is a mold release, super high flow, transparent.

Kaofu Chemical HPS-850HG is used for making of injection,pc peripheral appliances,electrical appliances, office machine  .

BDT H3802 has an excellent mold flow, hot tear resistance, bonding adhesion, good resistance to the fuel containing alcohols.

NuSil™ R-2200-11 is used by the aircraft industry as silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections. Fuel Resistance Static Dissipation and Electrically Conductive Silicones Ice-Phobic Coatings General Purpose: Mold MakingComment: Casting, Creating Molds.

POM copolymer unreinforced, medium viscosity, tribologically modified, optimized sliding and wear behavior

Kotex K-30F5 is a Wear resistance, Translucent

White Masterbatch 164 recommended for injections, Blow moldings, Sheets,Thin Films and Cables

TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries. TRIREX 3022IR is a polycarbonate resin grade which has high low temperature impact strength in combination with superior mechanical and physical property. CHARACTERISTICS Superior low temperature impact resistance Good flow-ability Workable under a wide range of temperatures (-100 ? ~ 135 ?) High electrical performance Good dimensional stability Low moisture absorbency Good weather resistance APPLICATIONS TRIREX 3022IR resin grade is used for electric and electronic applications, food contact materials and etc. Medium viscosity. Transparent colors only.

Pentamid AHT GV30 H MOS non-colored is a normal viscosity, heat stabilized polyamide 4.6,easy flow, 30% glass fiber reinforced, modified with mos2.

ISO-LEN® P is an ultra-high molecular weight low-pressure polyethylene based on the proven ISO-LEN® 1000. Due to the homogeneous reinforcement of glass microspheres with PE-UHMW, ISO-LEN® P achieves not only a significantly improved abrasion resistance - especially at high machine speeds - but also an optimization of the rigidity of the workpiece.

VOLTIS® Hp 2061 (PF CP 201) is a Highest mechanical strength, good electric properties at normal humidity.

Formalen PP-Copolymer 30% glass fiber reinforced Natural is used for mechanical, aeronautical, electric and construction applications. It has good stiffness, good resistance to chemicals, and good electrical properties.

Aqua colored low deformation material suitable for linear bearings and slides Rulon® 142 is a specially formulated dull blue-green linear bearing material that exhibits low wear, high thermal dissipation, and good dimensional stability characteristics.Among its many benefits are the virtual elimination of stick-slip, vibration dampening, self-lubrication, uniform friction, long life, ease of application and design diversity.Rulon 142 has excellent mechanical properties and is the ideal material for machine tool applications. Its low deformation characteristics limit the amount of misalignment that can occur with other bearing materials.Strong acids and bases should be avoided, as they may attack the fillers.

3B Fiberglass DS 8800-11P is a glass chopped strand specifically designed to rein-force high performance thermoplastic polymers, including PPS, PES, PSU, PPSU, PEI and PEEK. Furthermore, it shows interesting benefits in reinfor-cing PBT resins. 3B’s state-of-the-art manufacturing technology provides to DS 8800-11P very good strand integri-ty and bulk density leading to smooth compounders feeding, with low fuzz generation. DS 8800-11P displays excellent dis-persion within a large range of resin viscosities, enabling high glass fiber contents (> 55%). It is known for final reinforced parts’ heat stability and high mechanical properties combi-ned with hydrolysis/glycolysis perfor-mances that are rated from high to even outstanding specifically in PPS. DS 8800 -11P also meets stringent requirements of food contact and drinkable water standards such as EC 10/2011, FDA, BfR and ACS.

Ponyl® 4001G40 is applied in structural parts, shells of power tools,etc.

Rulon® J is an all-polymeric reinforced, light brown colored PTFE compound that operates exceptionally well against soft mating surfaces such as 316 stainless steel, aluminum, mild steel, brass and other plastics. The unique "shaft friendly" material is also low in friction and wear and is self lubricating.Rulon J has one of the lowest coefficients of friction of most reinforced PTFE materials. This makes it ideally suited for start/stop applications where stick-slip must be eliminated. The tribological properties of this material also make it suitable for both bearing and wear component applications.

Semi-crystalline thermoplastic with high Hardness, rigidity and mechanical strength as well good creep resistance. PET has very good ones Sliding properties and shows little sliding wear. Also for parts due to its good dimensional stability good with high demands on dimensional accuracy suitable.