Suppliers in Other Parts & Components

"At Chem-Trend, we are not simply a supplier. We are a visionary, working alongside you to create solutions that help you today, while forging the way to the future. It starts with our people, who begin each day focused on your business, your challenge, and your success. It starts with you: your goals, your challenges, your possibilities. Through collaboration and innovation, we use a combination of industry-leading products and custom solutions to give you a competitive advantage immediately, all while providing a sustainable and successful path forward. Helping customers in nearly every sector of manufacturing, we have built a remarkable presence throughout the world. This provides local support and development close to home, while allowing for deployment to local manufacturing sites."

"Chengdu Silike Technology Co., Ltd. was officially established in 2004, located in NO. 336, CHUANGXIN AVE,QINGBAIJIANG INDUSTRIAL,CHENGDU,CHINA, which has offices in Guangdong, Jiangsu, Fujian and other provinces. At present, the company has a plant area of more than 20000 m2 with an independent laboratory area of 3000m2, a production capacity of 8000 Ton / Year. As an innovator and leader in the application of silicone in china in the field of rubber-plastic, Silike has focused on the integration of silicone and plastics for more than 20 years, taking the lead in combining silicone and plastic, and developing Multi-functional silicone additives applied in footwear, wires& cables, automotive interior trims, and Telecommunication pipes, plastic films, engineering plastics....etc. In 2020, Silike has successfully developed a new material for silicone-plastic combination: Si-TPV silicon-based thermoplastic elastomers, after a long period of deep cultivation and technical research in the field of silicone-plastic binding."

Petkim, one of the most popular corporations in our country, is indispensable raw-material producer of the industry with its product range of more than 50 products. Its petrochemical products are important input of construction, electricity, electronic, packaging, textile also medical, dying, detergent and cosmetic sectors. Petkim maintain to add value to our national economy and happen to source of pride by respecting people and environment-friendly production technology on the other hand contributing to our cultural, social, economic life besides performing 3,2 million tons of gross production annually.

"Enflo LLC is one of the largest, privately owned manufacturers of Polytetrafluoroethylene (PTFE) in North America. Founded in 1954, Enflo is a PTFE specialized solution provider with proven expertise in manufacturing Virgin, Reprocessed and Filled (Enflon®) PTFE basic shapes. Enflo manufactures PTFE molded sheets, skived sheets, tape, extruded rod and tubing, molded cylinders and rod in standard and custom sizes using PTFE resins and fill materials to fit our customers’ needs. Enflo serves a wide range of industries such as construction and bridges, food and beverage, oil and gas, electronics, automotive, aerospace and defense, chemical, energy, and industrial, where high quality products built by proven manufacturing operations are critical for success. We have two manufacturing plants working for our worldwide customer base. U.S. customers are serviced by Enflo LLC in Bristol, Connecticut, and Canada/International customers are serviced by Enflo Canada Ltd., in Grand Falls, New Brunswick, Canada."

Since our creation in 1993 PCL have progressively increased the product range it offers to now include ABS, Polycarbonate, PC/ABS alloys, ASA and other engineering thermoplastics. Our versatile manufacturing plant allows us to offer tailored materials, as demanded by your application. What really differentiates us is the service we offer to our customers; from rapid colour matching, outstanding technical support and first-class product quality through to flexibility on the quantity ordered and super-fast delivery from our production plant in Durham, UK.

ProPolymers compounds and distributes high temperature thermoplastic resins. We are located near Ann Arbor, Michigan. Our facility is state of the art utilizing twin screw compounding equipment specifically designed for the unique processing, pelletizing and drying needs of high temp resins. Most resin producers offer design assistance and data. The advantage to working with us is we are not limited to a specific polymer so we tell you the good and bad attributes of each resin. Our data is better benchmarked than our competitors. Unlike other specialty compounders we have a lower overhead and higher commercialization rate that allows us to sell at a lower price. Also we do not try to sell custom grades to applications that don't need them.

"Silma is an Italian company active in the development and production of color and additive masterbatches for the plastics industry and has been in business since 1978. In recent years the company has significantly developed its R & D Lab where, thanks to the cooperation of our customers, tailor made products are created to meet the most stringent quality specifications and performances to compete in a market increasingly driven by excellence and innovation."

VTEC™ Polyimide (PI), only by RBI, is the next quantum leap in advanced engineering polymers, delivering unparalleled and reliable long-term performance in the most demanding applications. VTEC is a virtually indestructible polymer. And it overcomes many of the limitations of traditional plastic materials. Our technological advances in polymer chemistry, coupled with highly sophisticated manufacturing capabilities, have resulted in a truly superior polyimide with ceramic-like qualities. VTEC stands alone in the world of polymers with its combination of strength, stability, thermal resistance, and electrical properties. VTEC is The Ceramic Plastic™.

"At the beginning of 2014 , father and son Wille started building their own filament extruder. They decided to do this because of the growing interest in 3D printing technology, the knowledge of plastic within the company and the company network. 3D4Makers is the result from a company that primarily dealt with selling plastic raw materials. Now the 3D4Makers team consists of five members, each with their own specialties. While building the filament extruder and testing it we found out that moisture in the filament can cause problems while printing. Moisture in the filament could also lower the quality of the printing product. 3D4Makers took this problem into account while building the filament extruder. Normally a filament extruder uses a several meters long waterbed to cool the filament. During this process the filament absorbs water. 3D4Makers chose not to use this cooling technique which means that the filament does not come into contact with water during the production process. On top of that the filament is directly packaged in a vacuum packaging after the production process. This production process makes the 3D4Makers filament particularly suitable for FDM and FFF 3D printers. The material has an excellent adhesion between the layers. This results in great improvement of the impact resistance, strength, durability, the printing process and “warping”. The 3D4Makers filament comes with a product information folder that contains technical information, printer settings, storage information and safety information. Basically everything you need to know."

Our purpose is the cornerstone of our performance pledge: “Leading beyond chemistry to improve life, today and tomorrow.” It can be traced back to our company’s roots and describes why we do something, what drives us and the contribution Evonik makes to society over and above generating profits. At Evonik, we go beyond chemistry to make life a little better day in, day out – a goal we are committed to. We aim to have a direct, positive impact on everyone’s life by enhancing the properties of our customers’ products. Our purpose is hence the driving force behind our strategic decisions, through which we naturally take responsibility for the present and future generations.

Since 1949, Electro Chemical has been at the vanguard of the war on industrial corrosion. In the early 1980’s, we pioneered the first commercial fluoropolymer linings and coatings for corrosion protection systems, and we maintain our industry leadership position today. Internationally known for the reliability and durability of our systems, our commitment to continuous innovation in the use of leading technologies provides us the edge in solving our customers’ most demanding corrosion protection problems. Today, we offer a complete line of fluoropolymer lining and coating systems for pressure vessels, tanks, distribution equipment and internal components where the corrosive environment is extremely harsh or the purity requirement is extremely high. Our engineers are always available to answer technical questions, to aid in materials selection, and to assist in selecting the most cost-effective system. Our experienced field teams can provide turnkey custom coating solutions at your site when the project is too large or time is too short to complete at one of our production facilities.

"Established in 1984, Zylog is India’s leading manufacturer of a diverse range of thermoplastic elastomer compounds that are approved and commercially supplied to automotive, medical & healthcare, wire & cable, building / construction, appliances, FMCG, agriculture and other markets. With a modest beginning in the late 80’s, Zylog, over the years, carved out a niche for itself in the speciality compounds business, receiving global approvals from domestic and multi-nationals automotive OEMs such as Tata Motors, GM, Fiat, Ford, Mahindra, Toyota, Renault Nissan, Volkswagen, Daimler, Maruti Suzuki, Honda, Ashok Leyland, Volvo, Eicher, TVS, Bajaj, Piaggio and many more. Besides automotive, Zylog is well received within the Medical and Healthcare devices industry, approved as suppliers to global companies."

BIO-FED, a branch of AKRO-PLASTIC GmbH, is a specialist for innovative and application-oriented biocompounds. Depending on the requirement profile, these compounds are biodegradable in various environments or suitable for long-term use and can also be either completely or partially made from renewable sources. The BIO-FED team are experts in the development, compounding and marketing of biodegradable and biobased plastics. Our experienced plastics specialists can help you with customized technical solutions for your specific application.

Natpet company (National Petrochemical Industrial Co.) is a polypropylene manufacturer in Saudi Arabia. The company invested in the construction of a polypropylene plant with an annual output of 400,000 metric tons in Yanbu, an industrial city on the west coast of Saudi Arabia. The factory was established in 2009 Production and operation began in the year. Natpet's main raw material propylene is provided by the propane dehydrogenation (PDH) device in the factory, so NATPET has a continuous supply of high-quality raw materials, and the NATPET polypropylene device is used by LyondellBasell (LyondellBasell) The modern Spheripol® patented process, based on these advantages, Natpet is able to produce a series of marketable, high-quality polypropylene products. Although the factory has only been put into production for a few years, Natpet is able to produce high-quality products and reliable after-sales Service and support have been widely recognized by customers. At the same time, Natpet also pays special attention to maintaining good collaboration and interaction with downstream markets and customers through continuous improvement and enhancement of its production operations.

"Nanocyl SA is the industrial multiwall carbon nanotube expert. We are a worldwide industry leader in the development, manufacturing and sales of multiwall carbon nanotubes (MWCNT) and MWCNT based formulated products. We are a Responsible company with the leading Health, Safety and Environmental standards to ensure safe handling and use of our materials. We are the leader of our MWCNT REACH dossier and a positioned leader to the 100-1000 mt production range. Our mission is to support our customers’ growth with top of the class industrial MWCNT, MWCNT formulated products and sustainable long term performance solutions. Our industrial strategy is to focus on the current challenges of the Energy, Transport and Electronic markets, while developing novel durable solutions for the Rubber market. We will do so by delivering high quality MWCNT, MWCNT formulated products and providing unique technical support worldwide."

Starting operations in October 1966, we were the first company in Japan to develop a UV absorber. Since then, we have consistently pursued the sustainable supply of high-performance and high-quality products as a leading company in the additive field, represented by our success with UV absorbers. Today, the products manufactured with our advanced technological skills based on our ability to meet ever-changing market needs and a spirit of eco-friendly manufacturing are receiving high marks from customers around the world. We will use the technology, know-how, and networks we have developed over the years and focus on training the next generation of human resources as we hand down our past achievement and spirit to future generations, uniting as a company continuing to create a new history for the next 60, 70, and 100 years. We look forward to your continued support in the future.

Solid Polymer Solutions was established in 2004 by Dr.ir. Stan Verbraak with the aim to provide technical development and management services to the international Engineering Plastics industry. Based on a unique combination of knowledge and experience in the areas of structure-property relationships in polymers, polymer blends rheology, product development, quality assurance, recycle technology, product marketing and product management, Solid Polymer Solutions adds value by providing creative, simple answers to complex product and/or market development challenges. This allows both small and large companies to innovate where others consolidate, and thus stay ahead of competition.

Chi Mei Corp.(“CMC”) is one of the world's leading suppliers of plastic and rubber materials. Chi Mei's many products are widely used in the manufacture of nearly countless customer goods. Our chief products include ABS resins, SAN resins, PS resins, MS resins, PC resins, PC/ABS resins, ASA resins, Q resins, PMMA resins, thermoplastic elastomers (TPE), high cis and low cis butadiene rubber (HBR/LBR), and styrene butadiene rubber (SSBR), etc. With more than 50 years of production and R&D experience in this field, we can offer a stable supply of plastic and synthetic rubber products, and we have also branched into the higher value area of key materials for the optoelectronic industry, including light guide plates, electronic chemical products, and phosphors. In particular, we are the world's largest vendor of ABS resins, PMMA resins, and light guide plates.

Haysite Reinforced Plastics has been a leader in composite materials since 1954, providing the most comprehensive range of laminated sheet, custom molded parts, pultruded shapes and molding compounds. Known for their technological advances and product innovation, Haysite is the go-to source for superior customer service and quality products. Their commitment to excellence has made them a leader in the industry.

Shandong Fine New Material Technology Co., Ltd. was established in 2006 and is located in the Chemical Industry Park of Linqu County, Shandong Province. It is a technology-based private enterprise covering an area of ​​60 acres and a total investment of 200 million yuan. The company has passed ISO9001 quality system certification, ISO14001 environmental management system certification, ISO45001 occupational health and safety management system certification, T27922-2011 product after-sales service evaluation system certification and EcoVadis certification, and Green Shield Credit 3A credit rating. It is a member of China Rubber Industry Association. unit. The company has an advantageous geographical location, neighboring the provincial capital Jinan to the west, and the port city of Qingdao to the east. The international airport, high-speed railway, highway, and port are interconnected, with developed transportation and convenient work and travel. Henan Kangnaite Chemical Co., Ltd. is located in Zhengzhou City, Henan Province and was established in 2009. The two companies integrate industry and trade with complementary advantages.The main products are green rubber chemicals NOBS, CBS, TBBS, DCBS, MBT, MBTS, ZMBT, ZDBC, ZDEC, ZBEC, DPG and so on . NOBS has an annual production capacity of 6,000 tons, CBS has an annual production capacity of 6,000 tons, TBBS has an annual production capacity of 5,000 tons, and others have an annual production capacity of 5,000 tons. From raw material preparation, feeding, drying, to finished product packaging, metal detection, and palletizing, automatic control is basically realized. Ensure the safety of production and the stability of product quality. For more than ten years, it has been supplied to the tire, latex and rubber products industries at home and abroad for a long time and has been recognized by the majority of users.

"SUGO is a leading material supplier of ESD,conductive and anti-static plastics compound in China. We provide a complete range of ESD plastic raw material well knownfor our superb quality and price. SUGO has a passion for developing a fullrange of ESD plastics raw material on a high quality level. Since 2000, we've specialized in the R&D, manufacturing andsales of modified engineering plastics. And our name is CNTPE (SUHENG) at thattime. Now, the company CNTPE is still exist and in 2012, we set up SUGO. SUGOmeans inspire, creative new plastics raw material all over the world to be withrespect for future and environment. For overthe more than ten years, we are one of the leading manufacturers creating ESDmaterial that bring reliable and flexible solutions."

Our two Northeast Ohio locations are solely dedicated toward producing and molding thermoset plastics to high standards that are engineered to perform. Located at 1265 Babbitt Road, Euclid, Ohio, 44132, we are proud to serve a diverse range of clients who come from numerous industries and are located worldwide. We have a deep and intimate understanding of the qualities our partners expect and are committed to meeting their needs by using time-tested practices and industry best materials. At Cuyahoga Plastics, we strive to cultivate meaningful and long-lasting relationships with our partners and clients that help to boost productivity and enable them to make the very most of their operations. That’s why we are among the few thermoset plastic manufacturers to provide both molding and compounding capabilities from a single provider to take the guesswork and stress out of acquiring needed parts and materials. Committed to addressing your needs however possible, drawing upon our vast number of available techniques and materials to make sure no detail is overlooked. Reach out today to learn more about everything we can do for you.

"The company PCW GmbH was established in 1887. At that time the Deutsche Celluloid Fabrik was founded as one of the world’s first PVC processing factories at the site in Eilenburg, Germany. Thus the foundation was laid for the tradition-steeped company which is today family-owned. In 2006 the Polyplast Müller Group took over the company, which was operating under the name of Eilenburger Compound Werk GmbH at that time. To meet the requirements and developments in the plastic processing field, investments were made in the double-digit million range, which went into the optimization of the existing plants and the erection of modern, highly productive compounding systems and a new infrastructure. This resulted in the formation of a state-of-the-art development production facility. The product portfolio also harks back to a long tradition. Under the brand name Decelith, PVC products have been sold around the world since 1936. The well-known product range is continuously expanded by new product groups including e.g. further developments in the field of polypropylenes (PP) and thermoplastic elastomers (TPE), which are a perfect supplement to the existing rigid and flexible PVC products. These materials were added to the product portfolio under the brand names Saxene and Saxomer. In addition to the products established in the market, we also cater to customer-specific requirements. A team of experienced engineers and technicians is available to support you with application-specific product developments."

ADDIPLAST GROUP is a French company, independant and family-owned, created in 1986 by Jean-Paul CHANTEGRAILLE, who relies on his experience as a research scientist within a large chemical group to develop a global offer of high performance.

U.S. Borax, part of Rio Tinto, is a global leader in the supply and science of borates—naturally-occurring minerals containing boron and other elements. We are 1,000 people serving 500 customers with more than 1,700 delivery locations globally. We supply 30% of the world’s need for refined borates from our world-class mine in Boron, California, about 100 miles northeast of Los Angeles.

"As one of the leading manufacturers and processors, ISO-TECH has been creating high-quality thermoplastic products for customers at home and abroad for over 25 years. A broad production spectrum, a sustainable corporate policy and a pronounced customer orientation characterize our company to this day. After being founded in 1990 with initially four employees, we were able to quickly establish ourselves as a specialist in the technical plastics segment. In the course of continuous organic growth, we have steadily expanded both the production of semi-finished products and the range of finished parts. The first milestones were reached as early as 1995 with the first certification according to ISO 9001 and the expansion of our team to over 20 employees. With the opening of a second plant in 2010, we were able to expand our range of products to include additional specialty plastics. For the 25th anniversary in 2015, the owner-managed company was represented in almost all branches of industry. Today ISO-TECH employs around 200 people and continues to invest in the expansion of production breadth and depth of manufacture."

PENTAC Polymer GmbH was founded in 1987, develops and manufactures customer specific polyamide injection molding compounds in its facilities at Groß-Umstadt. Our mid-sized, independent, family owned company is specialized in thermoplastic engineering materials based on polyamide.

Swancor was established in 1992, with plants in Nantou, Shanghai, Tianjin, Jiangsu, and Malaysia. Swancor products including environmentally friendly corrosion-resistant vinyl ester resins and special unsaturated polyester resins, wind turbine blade materials such as infusion resin, hand lay-up resin and adhesive, and high-performance fire retardant resins that can be used in railway and transportation application. In order to meet trend of longer and lighter weight for wind blade, Swancor also developed prepreg resin and pultrusion resin for carbon fiber spar caps. Swancor is a technology-oriented company, focusing on innovative research and development, and provides customers with customized total solutions to help customers improve their competitiveness. Swancor fully complies with global quality assurance standard, such as ISO9001, ISO14001 and ISO45001, to bring value to customers and partners, and also gets the certificates from Lloyd’s and DNV.

For almost 50 years, James Walker Devol has strived to offer customers innovative solutions through our vast experience in thermoplastic engineering. At James Walker Devol we do not simply manufacture components to customer specification – we work in tandem with customers to identify and analyse areas where we think our materials could offer both performance improvements and cost savings. About UsWe have developed specific engineering teams who possess an intimate knowledge of our customer’s applications across various industries and sectors. These teams provide a complete project management service – including intensive on-site value engineering analyses and bespoke solutions designed to meet the exact needs of our customers. Bespoke manufacturing facilities also mean James Walker Devol has complete control of the manufacturing process – from the material casting through to the finished machined components. Using the most modern equipment, James Walker Devol can tailor make products on both small and large scales. We have the capacity to mould, cast and machine components from 10mm diameter to in excess of 2,000mm. Individual components can weigh up to 1,000kg each. We have invested heavily in materials development and testing, with specific laboratories for these purposes contained within our 8,200m facilities. As well as the capability to perform standard material tests, we have the flexibility and expertise to develop factory acceptance testing (FAT) as required. Whatever your requirements, James Walker Devol will ensure that our products provide the optimum solution.

Founded as a family company in 1980, Polimersan is the first company in Turkey to manufacture many plastics known as Engineering Plastics . Progressing with the principle of the best quality and fast service since the day it was founded; Polimersan is one of the first 3 manufacturers in the world in terms of production capacity. Polimersan is producing Engineering Plastics in Turkey for many years, which were being imported previously. Polimersan produces its products in compliance with the world standards at its production plants established on a total area of 45,000 m² . Those products are provided to both domestic and foreign customers directly from the factories in Turkey, USA, and Italy. At the end of 2013, Polimersan added a very powerful player to its production chain by acquiring the extrusion factory of British Global EPP, which is one of the leading companies in plastics production in England. Our manufacturing methods are extrusion, roll-extrusion , molding, ram-extrusion, automatic molding and surface treatment. Polimersan has all the quality certificates in the world related with its filed. Thanks to its own R&D department, Polimersan is in a highly advanced position in manufacturing technology and product development .

GRP LTD is a well-known manufacturer of reclaim rubber from used tires, upscaled polyamide from nylon waste, and engineered products die cut from end-of-life tires. Established in 1974, the company operates five business verticals with seven manufacturing units across India, boasting an installed capacity of 75,000 MT per annum. GRP LTD is approved by seven of the top ten global tire manufacturers and four of the top five non-tire rubber products manufacturers.

"The Company - FerroPlast Srl, Vimodrone Milan Italy Since 1978 Ferro-Plast S.r.l. located in Vimodrone (Milan), distributes on the Italian Market Masterbatches and Additives for plastic and elastomers. Thanks to its experience and to its wide range of products, Ferro-Plast has an excellent penetration on the Italian Market, covering most of all applications in plastic. We are ISO 9001:2015 certified and we select leader companies extremely specialized in their specific product range all over the world, granting the best and competitive technology. We are always looking for new products able to satisfy the production exigencies highly technological and specialized."

" Founded in 2002, a history in the vocation of engineering plastics, expertise in polyamides, polyacetal, their compounds and with their own brands. Distribution and processing make up the current portfolio. Located in Mauá-SP, strategically next to the Rodoanel, 3,200 m², twin screw extruders, automated lines, installed capacity of 9,600 ton/year, logistics and own deliveries. Own and professionalized laboratory, one of the most complete in Brazil."

"Renegade Materials offers everything you expect from a ""large"" prepreg supplier, but with the flexibility, focus and responsiveness of a small business. With Renegade Materials, you work with people who are empowered decision-makers, committed to delivering products you can trust. As the global leader in the manufacture of high temperature composite materials for aerospace applications, we deliver light-weight, highly-engineered prepregs, resins, adhesives and hybrid composite systems to enable maximum fuel efficiency in commercial and military aircraft structures. Renegade Materials is the world's largest supplier of safe, non-toxic polyimide prepreg materials for high-temperature service in military and commercial aircraft structures and propulsion systems. Many aerospace manufacturers use polyimide composite materials as a viable substitute for titanium, Inconel and heavy insulation blankets to save cost and weight. "