Products in Building Wires & Power Cables

ElectriPlast® EP-CF/ABS is Acrylonitrile Butadiene Styrene (ABS) with Nickel Plated Carbon Fiber as core fiber.

Polsil® GUM 210/65 is a special grade heat cured elastomer with higher thermal resistance.

3H Vinacom PVC Compound are included insulation and sheath application of wire and cable with temparature rating of less then 1050C and conform to the international and Vietnam standards such as ASTM D1505, UL 62, UL 94, IEC 60502, IEC 60227, TCVN 5935, TCVN 6610, RoSH directive 2002/95/EC and its amending directives.Beside that special PVC properties are available upon customers requirement. There also available some grades are produced with characteristics of durableness, termite resistance, heat resistance, flamable resistance, dull and gloss surface.

PanTINT® 70 and 72 Series are concentrated pigment dispersions in a plasticizer base. Compatible with a wide range of polyvinyl chloride (PVC) resin formulations for thermoplastic applications. The Pigments chosen for the 70 and 72 Series exhibit color brilliance, strength, chemical and UV resistance and lightfastness. Most are suitable for interior and exterior applications. The 70 Series are pigments dispersed in a monomeric pthalate plasticizer while the 72 Series are dispersed in pthalate compliant plasticizer.

Anchor Seal SY5300VS Amber-Clear is anchor-seal epoxy for potting compounds and encapsulants coils and transformers. It bonds to PVC and vinyl and is moisture resistant, low viscosity, extended gel time, PVC cable/wire, switch connectors, signal generating transducers.

PanTINT® 70 and 72 Series are concentrated pigment dispersions in a plasticizer base. Compatible with a wide range of polyvinyl chloride (PVC) resin formulations for thermoplastic applications. The Pigments chosen for the 70 and 72 Series exhibit color brilliance, strength, chemical and UV resistance and lightfastness. Most are suitable for interior and exterior applications. The 70 Series are pigments dispersed in a monomeric pthalate plasticizer while the 72 Series are dispersed in pthalate compliant plasticizer.

Saudi Carbonate SCC PCC 90C – YB is surface coated ultra fine PCC suitable to use in Cable Compounds. Its lower density, smaller particle size, calcite structure, purity and good dispersion in polymer matrix which controls volume resistivity. Better dispersion characteristics results increase in loading and output with smoother surface, good elongation at break, higher shore hardness, better tensile strength, good weathering properties and better electrical properties.

Kkalpana Group KI-04 IS is an insulation type A Compound for insulation applications in a wide variety of cables & especially in power cables. KI-04IS is formulated with a high quality resin with plasticizers, stabilizers and other additives.

MoldX® S45 is engineered to allow higher loadings versus standard alumina trihydrate (ATH) products and offers excellent processing from 180 phr to as high as 240 phr.

PanTINT® 70 and 72 Series are concentrated pigment dispersions in a plasticizer base. Compatible with a wide range of polyvinyl chloride (PVC) resin formulations for thermoplastic applications. The Pigments chosen for the 70 and 72 Series exhibit color brilliance, strength, chemical and UV resistance and lightfastness. Most are suitable for interior and exterior applications. The 70 Series are pigments dispersed in a monomeric pthalate plasticizer while the 72 Series are dispersed in pthalate compliant plasticizer.

WellChem Melamine Hydrobromide (MHB) proves to be excellent flame retardants for specific applications, either alone or combined with our “Exflam APP” ammonium polyphosphate and other flame retardants.

Key to responding to accommodating high value-added plastics. Our antioxidants are used for various applications such as electric wires, high-voltage cables and resins that protect distribution cables. As the diversification of plastic picks up speed, better quality will be sought, including for components used to establish information networks. With our accumulated know-how and technology, we are actively engaged in research and development to meet these needs

PEROXAN BIB-40 PK is Di-(2-tert.-butyl-peroxyisopropyl)-benzene 40%, Powder with clay.PEROXAN BIB-40 PK is used for the crosslinking of natural rubber and synthetic rubber, as well as polyolefins.

Marshall Additive Technologies FSD479 is an antimony free proprietary inorganic blend flame retardant synergist for use with halogen based flame retardant polymer compounds where Zinc Hydroxy Stannate is used as the primary synergist. It allows the formulator to reduce the amount of the expensive Zinc Hydroxy Stannate while retaining flammability performance and hence provide an overall cost saving. This product is applicable to PVC, CPE, and a wide range of polymer systems where the flame retardant is bromine or chlorine based.

INNOPRENE 1350 is a product that is already completely cross-linked and there is no need for an extra cross-link process before its ultimate use. Also, it is possible to simplify the processes and reduce the prime cost as it is an environment-friendly material allowing for an easy recycle of scraps resulted from processing.

Preniphor™ EPFR-400A contains N and P, is a kind of halogen free environmentally friendly flame retardant. It has been developed especially for the thermoplastic polyurethane and thermoplastic elastomer (TPE). This flame retardant functions in the condensed phase and the gas phase. The FR TPU can be used in power cables, communication cables, geographic exploration cables and auto cables, etc. TPU with Preniphor™ EPFR-400A can pass the tests of UL 94 V-0 (0.75mm), UL 1581 VW-1 and other flame retardant grades.

Agiplast Agimid 2496B00 has mechanical properties along with the chemical, physical and high aging resistance. Agimid PA12 grades includes flame retardant, conductive, antistatic, reinforcement with glass fibers characteristics. Agimid 2496B00 is PA 12 Antistatic.

PanTINT® 70 and 72 Series are concentrated pigment dispersions in a plasticizer base. Compatible with a wide range of polyvinyl chloride (PVC) resin formulations for thermoplastic applications. The Pigments chosen for the 70 and 72 Series exhibit color brilliance, strength, chemical and UV resistance and lightfastness. Most are suitable for interior and exterior applications. The 70 Series are pigments dispersed in a monomeric pthalate plasticizer while the 72 Series are dispersed in pthalate compliant plasticizer.

PanTINT® 70 and 72 Series are concentrated pigment dispersions in a plasticizer base. Compatible with a wide range of polyvinyl chloride (PVC) resin formulations for thermoplastic applications. The Pigments chosen for the 70 and 72 Series exhibit color brilliance, strength, chemical and UV resistance and lightfastness. Most are suitable for interior and exterior applications. The 70 Series are pigments dispersed in a monomeric pthalate plasticizer while the 72 Series are dispersed in pthalate compliant plasticizer.

EVATHENE® UE3312 is an ethylene-vinyl acetate copolymer resin (EVA) for use in foam injection and compression molding machine.

TRELGUM has good deformation and compression resistance, flexural strength, abrasion resistance, and enviromental resistance, and excellent oils resistance and chemicals resistance. It keeps its flexibility and elasticity features within a wide temperature range (from -50°C to +100°C).

The HFFR-XL compound product range is a group of thermosetting, halogen-free flame retardant, low-smoke and non-toxic compounds based on polyolefins and mineral fillers, which can be crosslinked using heat or moisture. A catalyst masterbatch is added during the final extrusion together with the main compound (SIOPLAS method). These products are suitable for producing cross-linked insulation or sheathing.

Natrochem DBP DLC-A is a dibutyl phthalate, silicon-dioxide blend polyisobutylene plasticizer for NR, SBR, CR, NBR, IR and IIR. It gives rapid incorporation, aids dispersion of fillers, and reduces pigment requirements in colored stocks.

Polytrans PTI-030000 is used for the production of insulation of power cables, including NYM type. The compound's specifications correspond to the German standard VDE 0207 for grade YI1.

PEROXAN BIB-40 GS is Di-(2-tert.-butyl-peroxyisopropyl)-benzene 40%, Granules with chalk.PEROXAN BIB-40 GS is used for the crosslinking of natural rubber and synthetic rubber, as well as polyolefins.

PPS-SG403E65 PPS is a 40% glass fiber reinforced polyphenylene sulfide compound developed to provide excellent engineering properties and processability

Ecopiren 3,5 is a fine white powder of magnesium hydroxide. Produced from selectively mined natural magnesium hydroxide (ground brucite), by milling and classifying.

SIVIC® 2870 HV is acryonitrile based multipurpose grade polymer with high viscosity, improved abrasion and tear resistance for industrial hose, cable and conveyor belt.

Sinof Hi-Tech PVDF purple Masterbatches Are Excellent Resistance To Sunlight , Excellent Resistance To Chemicals And Solvents , High Wear Resistance, Good Stain Resistance, Good Flame Retardant, Low Permeability For Most Gas And liquid. They also have High Dielectric Strength And Volume Resisance, Good Thermal Stability , High Mechanical Strength At High Temperature and Easy For Processing, Forming And Welding.

WellChem Melamine PyroPhosphate (MPyP) proves to be excellent flame retardants for specific applications, either alone or combined with our “Exflam APP” ammonium polyphosphate and other flame retardants.

PEROXAN PK295 GS is 1,1-Di-(tert.-butylperoxy)-3,3,5-trimethylcyclohexane 40%, Granules with chalk.PEROXAN PK295 GS is used for the crosslinking of natural rubber and synthetic rubber, as well as polyolefins.

KE-8020 is Most economical products. KE-8020 is used in thick extrusion and molding.

PanTINT® 70 and 72 Series are concentrated pigment dispersions in a plasticizer base. Compatible with a wide range of polyvinyl chloride (PVC) resin formulations for thermoplastic applications. The Pigments chosen for the 70 and 72 Series exhibit color brilliance, strength, chemical and UV resistance and lightfastness. Most are suitable for interior and exterior applications. The 70 Series are pigments dispersed in a monomeric pthalate plasticizer while the 72 Series are dispersed in pthalate compliant plasticizer.