Products in Other Wire & Cable Applications

ECONYL® BLACK BK2 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® COBALT BLUE BX1 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

Shrieve DF 500 Dielectric Fluid is used in high pressure pipe-type cable systems. Shrieve DF 500 is derived from synthetic alkylates and polybutene. The specifications and typical tests are set forth below. DF 500 is also suitable as a cable pulling lubricant for underground cable systems due to its excellent lubricity and compatibility with other dielectric fluids.

NBR 1845 is essentially an acrylonitrile (17-20%) and 1,3-butadiene copolymer obtained by emulsion polymerization method with the use of fatty acid soaps as emulsifier in accordance with the ecologically clean technology. Low content of acrylonitrile, good frost-resistance, satisfactory oil resistance.

Flame retardant V2 copolymer PP halogen free. For SDS, please contact Addiplast Group using the 'Request Document' button.

LEECAST 38-191 is a proprietary two-part epoxy adhesive and encapsulating compound. It has been used extensively for potting lead wires in UL-listed commercial gasoline pumps. LEECAST 38-191 has exceptional chemical resistance, especially in respect to gasoline, various gasoline alcohol additives, and other aggressive organic solvents. It also features fast room temperature cure and excellent adhesion to a variety of wire coatings and other substrates. It is formulated with enough thixotropy to inhibit sag on vertical surfaces and self-leveling when applied in a bead on horizontal surfaces.

Vitrolite® is a naturally occurring mineral and with concentrations of less than 0.5% has a profound effect on polymer melts. Vitrolite® is effective in reducing polymer melt viscosity without adversely affecting the finished polymer mechanical properties. Vitrolite is not known to chemically interact with polymers or additives, and has been widely used in the polymer industry. It is not essentially inert but it is stable (millions of years in age) and does not change its effect upon multiple uses (e.g., compounding followed by molding).

BRUGGOLEN® H3386 is a mixture of copper-complex-based antioxidants and synergists. It is used for the retention of natural polyamide color after conditioning. This product is particularly suitable for the stabilization of polyamides against thermal aging, chemical attack, or aggressive weathering conditions. Powerful long-term stabilization/ natural colors Excellent UV stabilization Very effective dispersion

Vitrolite® is a naturally occurring mineral and with concentrations of less than 0.5% has a profound effect on polymer melts. Vitrolite® is effective in reducing polymer melt viscosity without adversely affecting the finished polymer mechanical properties. Vitrolite is not known to chemically interact with polymers or additives, and has been widely used in the polymer industry. It is not essentially inert but it is stable (millions of years in age) and does not change its effect upon multiple uses (e.g., compounding followed by molding).

Flame retardant homopolymer PP halogen free V0, impact modified. For SDS, please contact Addiplast Group using the 'Request Document' button.

Flame retardant V2 homopolymer PP halogen free, UV stabilised. For SDS, please contact Addiplast Group using the 'Request Document' button.

BRUGGOLEN® TP-H2062 is a halogen and metal-free heat stabilizer for polyamides in the form of polymeric granules. In E&E applications, it provides:Improved retention of mechanical performance under heat compared to standard phosphite/phenolic-based stabilizersTensile strength retention >50% for 2500h at 150°CMaintains comparative tracking index (CTI) up to 600VAllows E&E applications at elevated temperaturesHalogen and metal-free heat stabilizer in granular product form

NBR 1855 is essentially an acrylonitrile (17-20%) and 1,3-butadiene copolymer obtained by emulsion polymerization method with the use of fatty acid soaps as emulsifier in accordance with the ecologically clean technology. Low content of acrylonitrile, good frost-resistance, satisfactory oil resistance.

8461 is a general-purpose lithium grease with a smooth, buttery texture. It is a corrosion-resistant lubricant for metal-to-metal, metal-to-plastic, and plastic-to-plastic applications. 8461 is useful for lubricating 3D printer mechanisms, gears, spindles, hinges, latches, tracks, pulleys, cables, machinery, tools, and equipment.

Vitrolite® is a naturally occurring mineral and with concentrations of less than 0.5% has a profound effect on polymer melts. Vitrolite® is effective in reducing polymer melt viscosity without adversely affecting the finished polymer mechanical properties. Vitrolite is not known to chemically interact with polymers or additives, and has been widely used in the polymer industry. It is not essentially inert but it is stable (millions of years in age) and does not change its effect upon multiple uses (e.g., compounding followed by molding).

E101 is formulated APAO polymer which is mainly used in personal hygiene, baby diapers, nonwoven gowns and drapes, incontinence mattress pads, nonwoven dental bibs, pet training pads, mattress assembly, foam bonding, fiber optic assembly.

Shrieve DF 100® Dielectric Fluid is used in convection and forced-cooled pipe cable systems. Shrieve DF 100® is also widely used in self-contained cable systems due to its high resistance to gassing under electrical stress. Shrieve DF 100® is derived from synthetic alkylates.

RoHS flame retardant V0 PP compound, with 30% glass fibers loaded and heat resistance. For SDS, please contact Addiplast Group using the 'Request Document' button.

BRUGGOLEN® H3336 is a mixture of copper complex-based antioxidants and synergists in powder form. BRUGGOLEN® H3336 provides highly efficient heat stabilization of polyamides up to 180°C, which leads to effective processing stabilization against polymer degradation. It gives a characteristic bluish discoloration after conditioning. Features:Cost-effectiveExcellent dispersionHigh extraction resistance, no plate-outSuited for E&E applicationsCharacteristic:Bluish discoloration after conditioning

Flame retardant extrusion copolymer PP halogen free. For SDS, please contact Addiplast Group using the 'Request Document' button.

Flame retardant V0 homopolymer PP with halogen, RoHS. For SDS, please contact Addiplast Group using the 'Request Document' button.

Flame retardant V0 (yellow card) polyamide 6 halogen free white RAL 9003. For SDS, please contact Addiplast Group using the 'Request Document' button.

AL 181 Silane is mercapto functional silane with wide usage in rubber and elastomers.

RoHS flame retardant V0 PP compound, with 30% glass fibers loaded. For SDS, please contact Addiplast Group using the 'Request Document' button.

Vitrolite® is manufactured from naturally occurring amorphous silicates and aluminosilicates and is non-toxic, inert, non-flammable, and does not affect UL approvals. Vitrolite® is suitable for all products including electrical, food contact, and medical devices. It is currently used as a processing additive for molding auto parts, food containers, consumer electronics, toys, wire and cable, pipe and a host of other products.

LEEBOND 37-75 is a proprietary two-part epoxy adhesive used in both electrical-grade potting and structural adhesive applications. Cured systems demonstrate excellent toughness, impact resistance and exceptional bond strength for hard to bond to substrates. This system can be cured at both room temperature or accelerated with modest heating.

AL180 is a water-white to light straw liquid. It is a mercapto-functional silane that finds use as a coupling agent in polysulfide and polyurethane caulks and sealants.

Flame retardant V2 polyamide 6 halogen free natural and colored. For SDS, please contact Addiplast Group using the 'Request Document' button.

Miller-Stephenson Chemical 850G-100X Low-Bake Nitinol Coatings offers a low-temperature variant of their next generation, acid-primer free (Non-Cr(VI)) medical coating for coating of temperature sensitives substrates like Nickel-Titanium Alloys, Polyamide, etc. These nitinol wire coatings are water-based, one coat systems providing the same robust and durable fluoropolymer coating in a lower cure temperature system. Achieving the same performance standards as our 850G-90XX and 850G-102X, this product was designed for the new generation of low temperature metal alloys and/or high temperature plastics. Our world-class next generation fluoropolymer chemistry delivers unmatched lubricity and adhesion on all medical guide wires. Its lower hazardous classification and stability at ambient temperature also help with handling, application pot-life, and storage conditions. These formulations generate very uniform, thin films (5-10 microns) which exceed all ISO and ASTM requirements. In practice, medical personnel will feel smooth, low-friction movement as the guidewire progresses through the vasculature. nd 850G-102X, this product was designed for the new generation of low temperature metal alloys and/or high temperature plastics.

Tina Organics Tricresyl Phosphate gives better fire retardancy due to higher phosphate content and good solvation. Tricresyl Phosphate is a low viscosity synthetic phosphate esters.

Sylvin™ 9067-90 Yellow 460 is a vinyl compound formulated for injection molding applications. This compound has a underwriters laboratories listing as a recognized component.

Shandong Chuanjun Chemical Zinc borate is better flam retarding effect and can replace antimonous oxide.Flame Retardant zinc borate is inorganic addition flame retardant. Its characteristics are that it has good hot stability, and not only stops buring and vanishes smokings but also be used with other inorganic flame retardant. It is used in epoxy resin, unsaturated polyester, polyurethane, etc. And it is widely used in rubber, plastic, cable, wood,etc. Zinc borate is insoluble in water, alcohol. but soluble in chlorhydric acid, sulfuric acid.

Sylvin Technologies Sylvin™ 9812-75 Red 6295 is a vinyl compound for general purpose electrical molding applications that require good flammability resistance. This compound has an underwriters listing as a recognized component.

POLYB® PA-490 is an additive added to attain improvement for processing of polyolefin resin at very low levels usage(100~100ppm). It is a white powder made of modified fluoro-elastomer. polymer processing aid is coated at the inside of the die wall and decreases the friction between melted resin and the die wall.

Sylvin™ 9604-90 Brown 7152 is a vinyl compound formulated for electrical molding applications. This compound has a underwriters laboratories listing as a recognized component.

Suqian Unitechem Antioxidant 1010 is Pentaerythritol tetrakis[3-(3',5'-di-tert-butyl-4'-hydroxyphenyl)propionate] with low volatility, migration resistance, extraction resistance.Widely used in the heat processing of polypropylene, polyethylene, polyoxymethylene, ABS resin and so on, which can prolong the service life of plastic products.