Products in Other Processing & Packaging Applications

Reagens CL/4 E is used in extrusion and injection molding of plasticized PVC. It imparts excellent initial color, good transparency and a good long term heat stability with most types of PVC resins. It may be also used in plastisol processing (rotational molding). The addition of an epoxy compound, such as Reaflex EP/6 (about 2-5 phr), markedly improves the long term heat stability.

FlexSafe™ ISO 100 are designed for a wide variety of applications:  hydraulics, compressors, vacuum pumps, blowers, turbines, light duty gear boxes, slideways, cables, conveyors, chains, air tools, and other applications in food and industrial plants.

TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries. TRIREX 3022L1(I) is a polycarbonate resin grade which has high low temperature impact strength in combination with superior mechanical and physical property. CHARACTERISTICS Superior low temperature impact resistance Good flow-ability Workable under a wide range of temperatures (-100°C ~ 135°C) High electrical performance Good dimensional stability Low moisture absorbency Good weather resistance APPLICATIONS TRIREX 3022L1(I) resin grade is used for electric and electronic applications, headlamp lens, food contact materials and etc. Medium viscosity. Transparent colors only.

STERalloy FDG is the first Liquid Molding Polymer Alloy Series that has been specifically designed for food and drug applications. All of the products in the STERalloy FDG Series exhibit unique physical and chemical properties and have been used in numerous applications where biocompatibility is required.Key Advantages: Approvable Materials Wide range of hardnesses ROHS compliant Very high physical properties Low moisture sensitivity Easy to use The food, drug, pharmaceutical, wine, beer, juice, dairy, hospital equipment, and prosthetic industries are just some examples of applications that utilize special products such as STERalloy FDG.STERalloy FDG Elastomeric Series: various hardness elastomers, shore 20A - 72D clear in color available in 2 speeds - fast and slow STERalloy FDG Rigid Series: rigid, tough polymer alloy plastics high heat distortion high physical properties

Smiths Metal Centers POM-C Natural or Black Unmodified is a high-quality general purpose engineering plastic material. Its chemical name is polyoxymethylene and it is available in a range of grades and forms to suit many applications.

Detectaseal® XS7H is the latest advance in contamination detection and containment. This unique range of metal detectable elastomer compounds has been developed specifically to meet the stringent demands of the pharmaceutical and food processing industries.The Detectaseal® fragments as small as 2-3mm can be easily identified by in-line metal detection equipment used to detect product contaminated by process lines.The Detectaseal® range includes Nitrile, Silicone, EPDM and Fluoropolymer (FKM) elastomer compounds (all FDA-compliant) available in blue and black, which allows the most appropriate material to be selected for every application.Detectaseal® compounds can be molded into O-rings and custom components.Key Attributes Early detection and containment of contamination: Reduced product loss, Increased productivity Blue seals to assist in easy identification Excellent mechanical properties and sealing efficiency Exceptional oil and heat resistance FDA-compliant elastomer materials Free from animal-derived ingredients Typical Applications Static and dynamic sealing applications Food processing equipment Pharmaceutical drug manufacturing equipment Bioscience industry.

fluteck™ K304 PEEK is a high performance thermoplastics polymers based on unreinforced Polyetheretherketone (PEEK).

Lati Industria Thermoplastici S.p.A Latigloss™ 57 G/40 F2 is a Product with high mechanical properties and exceptional surface finish based on Semi-aromatic polyammide (PPA) reinforced with . It is processed by using injection molding.

UJU New Materials F3150 is a high-strength , high temperature plastic that has practical toughness. It maintains excellent mechanical properties when exposed to steam and offers superior heat resistance to Polycarbonate. It does not offer the impact strength of PPSU.

fluteck™ K300 PEEK is a high performance thermoplastics polymers based on unreinforced Polyetheretherketone (PEEK).

POSS® MS0825 - Nanoreinforced Polyamide 6 technology is used to achieve increased hydrophobicity, increased oil resistance, improved toughness and easier processability through structural control at the nanometer level. POSS's nanoscopic size, dispersion, and chemical structure lead to these enhancements which can be realized in any grade of nylon.

fluteck™ P1050 Modified PTFE Standard Grade is Modified PTFE for Ram Extrusion, Compression and Isostatic molding.

The Addisil™ IND 1060 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80° Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months as of manufacturing date Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations.

STERalloy FDG is the first Liquid Molding Polymer Alloy Series that has been specifically designed for food and drug applications. All of the products in the STERalloy FDG Series exhibit unique physical and chemical properties and have been used in numerous applications where biocompatibility is required.Key Advantages: Approvable Materials Wide range of hardnesses ROHS compliant Very high physical properties Low moisture sensitivity Easy to use The food, drug, pharmaceutical, wine, beer, juice, dairy, hospital equipment, and prosthetic industries are just some examples of applications that utilize special products such as STERalloy FDG.STERalloy FDG Elastomeric Series: various hardness elastomers, shore 20A - 72D clear in color available in 2 speeds - fast and slow STERalloy FDG Rigid Series: rigid, tough polymer alloy plastics high heat distortion high physical properties

The Addisil™ IND 2070 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80 Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits Good transparency, no yellowing Good mechanical performance Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf life of 6 months for the single components if stored appropriatelyM Very long pot life of 2 to 4 weeks for the mixed components Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations.

STERalloy FDG is the first Liquid Molding Polymer Alloy Series that has been specifically designed for food and drug applications. All of products in the STERalloy FDG Series exhibit unique physical and chemical properties and have been used in numerous applications where biocompatibility is required.Key Advantages: Approvable Materials Wide range of hardnesses ROHS compliant Very high physical properties Low moisture sensitivity Easy to use The food, drug, pharmaceutical, wine, beer, juice, dairy, hospital equipment, and prosthetic industries are just some examples of applications that utilize special products such as STERalloy FDG.STERalloy FDG Elastomeric Series: various hardness elastomers, shore 20A - 72D clear in color available in 2 speeds - fast and slow STERalloy FDG Rigid Series: rigid, tough polymer alloy plastics high heat distortion high physical properties

Rulon® 1439 is a white FDA compliant material that is suitable for immersed service with better wear characteristics than most other PTFE compounds. Its color makes it esthetically pleasing for food and pharmaceutical applications.This material is also resistant to many harsh chemicals found in the application environments where it is typically used. It is compatible with most commercially available lubricants for additional reduction in friction. Its properties allow it to be effectively utilized as a bearing or sliding surface.

STERalloy FDG is the first Liquid Molding Polymer Alloy Series that has been specifically designed for food and drug applications. All of the products in the STERalloy FDG Series exhibit unique physical and chemical properties and have been used in numerous applications where biocompatibility is required.Key Advantages: Approvable Materials Wide range of hardnesses ROHS compliant Very high physical properties Low moisture sensitivity Easy to use The food, drug, pharmaceutical, wine, beer, juice, dairy, hospital equipment, and prosthetic industries are just some examples of applications that utilize special products such as STERalloy FDG.STERalloy FDG Elastomeric Series: various hardness elastomers, shore 20A - 72D clear in color available in 2 speeds - fast and slow STERalloy FDG Rigid Series: rigid, tough polymer alloy plastics high heat distortion high physical properties

fluteck™ F100 PFA is a thermoplastic fluoropolymer based on perfluoroalkoxy resin (PFA).

Polyplastics Group Topas® 5013S-04 is a high flow injection molding grade with a 130°C heat distortion temperature. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for healthcare and other high-tech products. The 5013 resin series features high flow characteristics for excellent mold detail replication. Lower leachables and extractables of TOPAS COC preserve content stability and quality, and chemical purity. This grade has a high heat distortion temperature to withstand 95°C PCR protocols, and is suitable for gamma or EtO procedures.

Nylene Medium viscosity, extrusion grade nylon 6 resin suitable for film co-extrusion, coatings, and compounding applications Excellent melt stability and good melt strength Excellent grease resistance, toughness, resistance to abrasion, and does not absorb food odors Meets the requirements of FDA regulation 21 CFR 177.1500 for direct food contact Optimum processing conditions should provide a melt temperature of 480 - 500°F at the die

Petroquim PH4040 is Apt for raffia extrusion processes. Good processability and productivity in extrusion and in looms. Excellent performance in weaving processes where it minimizes the formation of dust and lint.

The Addisil™ IND 2080 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80 Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits Good transparency, no yellowing Good mechanical performance Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf life of 6 months for the single components if stored appropriatelyM Very long pot life of 2 to 4 weeks for the mixed components Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations.

High thermal conductivity product based on Polypropylene homopolymer (PPh). Special filler. Potentially suitable for food/medical contact application.

STERalloy FDG is the first Liquid Molding Polymer Alloy Series that has been specifically designed for food and drug applications. All of the products in the STERalloy FDG Series exhibit unique physical and chemical properties and have been used in numerous applications where biocompatibility is required.Key Advantages: Approvable Materials Wide range of hardnesses ROHS compliant Very high physical properties Low moisture sensitivity Easy to use The food, drug, pharmaceutical, wine, beer, juice, dairy, hospital equipment, and prosthetic industries are just some examples of applications that utilize special products such as STERalloy FDG.STERalloy FDG Elastomeric Series: various hardness elastomers, shore 20A - 72D clear in color available in 2 speeds - fast and slow STERalloy FDG Rigid Series: rigid, tough polymer alloy plastics high heat distortion high physical properties

Lati Industria Thermoplastici S.p.A Latigloss™ 66 H2 G/50 F2 is a Product with high mechanical properties and exceptional surface finish based on Polyamide 66 (PA66) reinforced with . It is processed by using injection molding.