Products in Industrial: Chemical Resistant

XIAMETER(TM) PMX-200 Silicone Fluid 12,500 cSt is a high-viscosity polydimethylsiloxane polymer manufactured to yield essentially linear polymers in a wide range of viscosities. The viscosities generally used in formulating polishes are in the range of 100 to 30,000 cSt. It is preferable to use a blend of a low-viscosity fluid and a high-viscosity fluid (e.g. 3 parts XIAMETER(TM) PMX- 200 Silicone Fluid 100 cSt and 1 part XIAMETER(TM) PMX-200 Silicone Fluid 12,500 cSt) to obtain optimum results in terms of ease of application and depth of gloss. The low-viscosity silicone fluid acts as a lubricant to make polish application and rubout easier, whereas the high-viscosity silicone fluid produces a greater depth of gloss. Since these polymers are inherently water-repellent, they will cause water to bead up on a treated surface rather than penetrate the polish film.

WACKER® AK 600 000 STAB is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 600,000 mm²/s. It is specifically formulated with a special heat stabilizer to provide protection against thermal decomposition and viscosity changes. This makes WACKER® AK 600 000 STAB highly suitable for applications that experience high temperatures and/or shear stress.

ELASTOSIL® RT 646 A/B is a castable, addition-curing, two-component silicone rubber that vulcanizes at room temperature. It is a flowable material with resistance against casting resins, making it suitable for various applications such as encapsulation of electronic components, all-round potting compound, and mold making in reproduction molding.

WACKER® AK 200 000 STAB is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 200.000 mm²/s. It is enhanced with a special heat stabilizer that safeguards the silicone fluid from thermal decomposition and viscosity fluctuations. As a result, WACKER® AK 200 000 STAB is particularly well-suited for applications that entail high temperatures and/or shear stress. It exhibits long-term heat stability, making it suitable for operating temperatures exceeding 150 °C, and it demonstrates high shear stability.

WACKER® AK 300 000 STAB is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 300000 mm²/s. It is formulated with a special heat stabilizer that provides protection against thermal decomposition and viscosity changes. This unique feature makes WACKER® AK 300 000 STAB highly suitable for applications subjected to high temperatures and/or shear stress. The heat stabilizer ensures the stability and integrity of the silicone fluid, allowing it to maintain its desired properties under challenging conditions.

ELASTOSIL® SC 870 A/B is a two-part silicone rubber designed for creating a thixotropic, addition-curing foam. The foam structure consists primarily of closed cells. This product is particularly well-suited for use with automatic dispensing equipment during processing. Its exceptional rheology allows for the production of CIPG foam gaskets, even in complex 3D geometries.

WACKER® AK 1 000 000 STAB is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 1,000,000 mm²/s. It is formulated with a special heat stabilizer that protects the silicone fluid from thermal decomposition and viscosity changes. As a result, WACKER® AK 1 000 000 STAB is well-suited for applications involving high temperatures and/or shear stress. It has a low solidification point, good dielectric properties, a high flash point, and is chemically inert.

WACKER® AK 500 000 STAB is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 500,000 mm²/s. This product is formulated with a special heat stabilizer that provides protection against thermal decomposition and viscosity changes. As a result, WACKER® AK 500 000 STAB is highly suitable for applications involving high temperatures and/or shear stress. Its unique formulation ensures the stability and performance of the silicone fluid in demanding conditions.

WACKER® AK 100 000 STAB is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 100,000 mm²/s. It is formulated with a special heat stabilizer that safeguards the silicone fluid from thermal decomposition and viscosity fluctuations. As a result, WACKER® AK 100 000 STAB is particularly well-suited for applications involving high temperatures and/or shear stress. It is a non-polar liquid with a low solidification point and exhibits good dielectric properties.

WACKER® AK 150 000 STAB is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 150,000 mm²/s. It is enriched with a special heat stabilizer that shields the silicone fluid from thermal decomposition and viscosity fluctuations. As a result, WACKER® AK 150 000 STAB is especially well-suited for applications involving high temperatures and/or shear stress. It is a non-polar liquid with a low solidification point and exhibits good dielectric properties.

ELASTOSIL® SC 835 A/B is a two-component silicone rubber that is flowable and addition-curing. It is specifically designed to form a closed cell foam structure. This material is highly compatible with automatic dispensing equipment, making it easy to process. ELASTOSIL® SC 835 A/B is ideal for the production of heat-resistant foam gaskets in a flat design, particularly for use in CIPG (Cured-in-Place Gasket) applications.

CHT Group QSil 553 is a 2-component silicone elastomer system specially designed for electronic potting and encapsulation applications. It offers good protection against chemicals, environmental contamination, mechanical shock, vibration, and impact damage. It can be employed in areas where low flammability is a prerequisite. The cured elastomer can be repaired. The component parts have relatively low viscosities and are readily mixed, either by hand or machine.

GENIOSIL® GF 9 is an organofunctional silane with various applications. It is commonly used in building & construction adhesives, Flooring installation, Industrial adhesives, Interior paints & coatings, and waterproofing membranes. GENIOSIL® GF 9 is particularly effective in glass-fiber reinforced or mineral-filled polymers as well as a surface modifier.

CHT Group AS1740 is part of a range of high-performance RTVs. It is a neutral cure silicone sealant specifically designed to meet the physical, chemical, and temperature resistance requirements of MIL-A-46146B. It features exceptional physical properties and is compatible with many sensitive substrates, including copper, brass, steel, aluminum, and FR4, making this an ideal option for many electronic applications where high performance is paramount. The alkoxy cure system produces a silicone sealant with excellent adhesion to most common substrates.

ARCOR® EE-121 Prime is a solvent-free, high 3.6 functionality epoxy Novolac coating specifically designed for aggressive chemical and high-temperature resistance. This exceptional coating is suitable for both immersion and non-immersion service, providing reliable protection in demanding environments. ARCOR® EE-121 Prime creates a tough, chemical-resistant coating on both ferrous and non-ferrous metals for full immersion applications and on concrete surfaces for secondary containment purposes. It is intended to be used as a prime coat as needed in conjunction with ARCOR® EE-121 or EE-121 HT, further enhancing the overall performance and durability of the system. ARCOR® EE-121 Prime is the ideal choice for achieving superior chemical resistance and high-temperature protection in various industrial applications. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!

ARCOR® 8526 is a solvent-free epoxy Novolac, specifically designed as a top-tier rebuilding material for metals in immersion service. This exceptional product is ideally suited for restoration or cladding applications, providing reliable corrosion and abrasion protection for condensers, heat exchangers, and FGD units. With its remarkable capabilities, ARCOR® 8526 can be applied up to an impressive 500 mils without any concerns of slump. Trust in the durability and effectiveness of ARCOR® 8526 to safeguard your equipment and ensure long-lasting performance even in the most demanding environments. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!

ARCOR® EE-91 is a solvent-free epoxy rebuilding compound specially formulated to provide exceptional corrosion and abrasion protection for condensers and heat exchangers. This compound is particularly well-suited for immersion in various water environments, including saltwater, brackish water, and potable water. Notably, ARCOR® EE-91 will fully cure even when immersed in water. It can be applied at a thickness of up to 500 mils without experiencing slump. Furthermore, this product holds essential certifications such as NSF certification for portable water, USDA approval for incidental Food Contact in Meat & Poultry Production, and FDA Guideline CFR 21 Section 175.300 listing for repeated food contact use. ARCOR® EE-91 is a reliable solution for protecting equipment in demanding environments while meeting stringent industry standards. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!

ARCOR® S-30 is a solvent-free, high-functionality epoxy Novolac coating specifically designed as a protective coating for metals in immersion service. This coating creates a tough, chemical-resistant, and low-friction barrier that is particularly well-suited for aggressive water service, including salt and brackish water environments. The multi-functional chemistry of ARCOR® S-30 enables it to serve as a versatile coating, offering reliable protection in moderate acid and caustic service conditions while performing exceptionally well at elevated temperatures. With its superior performance in petrochemical environments, including crude oil, diesel fuel, and gasoline, ARCOR® S-30 proves its versatility. It can be applied up to 60 mils without slumping, providing a robust coating thickness. Choose ARCOR® S-30 for its exceptional protection, chemical resistance, low-friction properties, and versatility in demanding immersion service applications, ensuring long-lasting durability and performance. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!

ARCOR® EE-121 HT is a modified version of ARCOR® EE-121 designed to enhance temperature performance by up to 100°F (depending on the specific application). While the increased temperature resistance provides added benefits, it may exhibit slightly reduced performance in highly aggressive acidic environments compared to ARCOR® EE-121. Specifically developed for demanding chemical environments, ARCOR® EE-121 HT excels in resisting acids, methanol, ethanol, and organic solvents at elevated temperatures. The incorporation of Kevlar® fibers in the formulation results in a robust, highly cross-linked coating with exceptional flexural, thermal, and impact strength, along with outstanding wear resistance. This versatile product is suitable for use on both ferrous and non-ferrous metals as well as concrete, making it an excellent choice for immersion or non-immersion containment applications. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!

ARCOR® EE-951 HT is a solvent-free, high 3.6 functionality epoxy Novolac that serves as an exceptional rebuilding material for metals in highly aggressive chemical and temperature immersion service. Designed with precision, ARCOR® EE-951 HT is an ideal choice for restoration or cladding purposes, providing superior corrosion and abrasion protection. With its remarkable application flexibility, ARCOR® EE-951 HT can be applied up to an impressive 500 mils without any concerns of slump. Experience the reliability and performance of ARCOR® EE-951 HT, delivering outstanding protection and durability for your metal surfaces in the most demanding and challenging environments. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!

ARCOR® 8506 is an Epoxy Rebuild designed to provide similar characteristics as our 8505 variant in terms of resin and amine composition. However, with the incorporation of small mesh Ceramic Beads and specific high-strength fibers, ARCOR® 8506 exhibits an exceptionally high level of impact, abrasion, and compressive strengths. This self-wetting formulation can be applied without a primer and is suitable for vertical and overhead surfaces at a thickness of up to +1/2" (500 mils, 12.5mm). It can be effortlessly leveled, resulting in a smooth finish that eliminates the need for a topcoat, significantly reducing both application and turnaround time. ARCOR® 8506 offers a highly convenient 1:1 Mix Ratio, whether by weight or volume, making it ideal for easy breakdown in the field. While it shares similarities with our EE-92 in terms of application, appearance, and texture, ARCOR® 8506 operates within lower temperature limits and possesses distinct chemical resistance properties. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!

ARCOR® EE-70 is a solvent-free, moisture insensitive epoxy coating designed for both immersion and non-immersion service. This remarkable product, ARCOR® EE-70, creates a resilient coating that is resistant to chemicals and abrasion on various surfaces, including ferrous and non-ferrous metals, concrete (damp or dry), and wood. It has received certification from reputable organizations such as the National Sanitation Foundation (NSF) under Standard 61 for Potable Water, as well as the USDA for Incidental Food Contact. With its exceptional properties, ARCOR® EE-70 is an excellent choice for applications on damp or wet substrates, providing reliable protection and performance. Experience the versatility and reliability of ARCOR® EE-70 for your coating needs, ensuring durability and compliance with industry standards. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!

ARCOR® 8507 is an Epoxy Rebuild designed to offer similar performance as our 8506 variant in terms of resin and amine composition. However, in addition to the small mesh Ceramic Beads present in 8506, ARCOR® 8507 incorporates larger mesh Ceramic Beads and high-hardness mineral fillers, resulting in a denser product with enhanced capabilities to withstand impact, abrasion, and compressive forces. This self-wetting formulation can be applied without a primer, even at a thickness of up to +3/4" (750 mils, 18.75mm) on vertical and overhead surfaces. It can be smoothly leveled, eliminating the need for a topcoat, thereby significantly reducing application and turnaround time. With a convenient 1:1 Mix Ratio by volume, ARCOR® 8507 is easy to use in the field. It offers a similar application, look, and feel as our EE-94, but with lower temperature limits and different chemical resistance properties. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!

ARCOR® EE-121 HT Prime is a modified version of ARCOR® EE-121 HT, designed to enhance temperature performance by up to 100ºF, depending on the specific application. While the increased temperature resistance offers improved performance, there may be a slight reduction in highly aggressive acid environments compared to ARCOR® EE-121 HT. Like its counterpart, ARCOR® EE-121 HT Prime is specifically formulated for demanding chemical environments, particularly acids, methanol, ethanol, and organic solvents. The incorporation of Kevlar® fibers results in a robust, highly cross-linked coating that provides exceptional resistance to chemicals, as well as high flexural, thermal, and impact strength. Additionally, it offers excellent wear resistance. ARCOR® EE-121 HT Prime is suitable for use on both ferrous and nonferrous metals, as well as concrete, for both immersion and non-immersion containment applications. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!

ARCOR® EE-96 is a solvent-free, two-component rebuilding compound specifically formulated to provide high wear and abrasion resistance. It serves as an ideal rebuilding and repair material for metals that have been damaged by corrosion, erosion, abrasion, or cavitation. With its exceptional durability, ARCOR® EE-96 is particularly well-suited for high-wear flooring applications in aggressive wear and impact zones, offering a reliable non-skid surface. This non-sagging compound maintains its integrity up to 200 mils without shrinking during the curing process. It exhibits excellent adhesion to both metal and concrete surfaces, ensuring a robust bond. As a Novolac Epoxy, ARCOR® EE-96 demonstrates excellent resistance in a wide range of chemical environments and can withstand heat up to 450ºF. Choose ARCOR® EE-96 for a dependable rebuilding compound that provides exceptional wear resistance, protects against corrosion and erosion, and maintains structural integrity in demanding environments. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!

ARCOR® EE-10 is a solvent-free, high functionality epoxy Novolac coating specifically formulated for both immersion and non-immersion service, with a particular focus on aggressive acid environments. This remarkable product, ARCOR® EE-10, creates a durable and chemically resistant coating on ferrous and non-ferrous metals as well as concrete surfaces. With its remarkably low viscosity, ARCOR® EE-10 serves as both a primer and a topcoat, offering versatility in application. It excels in environments with 98% Sulfuric Acid immersion, providing exceptional protection and durability. Choose ARCOR® EE-10 for outstanding performance in aggressive acid environments, ensuring long-lasting and reliable corrosion resistance. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!

ARCOR® EE-97 is a solvent-free, two-component rebuilding compound specifically designed to repair damaged, cracked, or worn metal surfaces. This non-sagging compound exhibits excellent adhesion to all metal surfaces and can be machined using carbide or high-speed cutting tools. With its impressive wear, abrasion, and impact resistance, ARCOR® EE-97 is a reliable choice for addressing various surface imperfections. As a Novolac Epoxy, it offers superior resistance in a wide range of chemical environments and can withstand temperatures up to 450ºF. Whether it's drilling, tapping, or sanding, this versatile compound provides a durable and machinable solution for restoring metal surfaces to their original strength and functionality. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!

ARCOR® 8518 is a solvent-free, ceramic-filled, high-functionality epoxy Novolac coating specifically designed for both immersion and non-immersion service. This exceptional coating is particularly well-suited for aggressive acid and alkali environments with elevated temperatures and/or abrasion. Applied on ferrous and non-ferrous metals as well as concrete, 8518 forms a resilient, chemical-resistant barrier. Its incorporation of Reactive Flexibility agents ensures excellent flexibility while maintaining outstanding resistance to chemicals and temperature, making it an ideal choice for large tank walls and floors without the need for fiberglass mat reinforcement. With its low viscosity, ARCOR® 8518 can be conveniently applied by hand or spray, achieving thicknesses of up to 80 mils per coat. This versatile coating solution provides long-lasting protection in demanding environments, delivering both reliability and performance. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!

ARCOR® EE-10.5 is a solvent-free, high functionality epoxy Novolac coating designed for immersion and non-immersion service, specifically in aggressive acid environments. This exceptional product, ARCOR® EE-10.5, creates a durable and chemically resistant coating on ferrous and non-ferrous metals, as well as concrete surfaces. With its low viscosity, ARCOR® EE-10.5 can be applied as both a primer and a topcoat, offering versatility in application. It excels in environments with 98% Sulfuric Acid immersion, providing excellent protection and reliability. Choose ARCOR® EE-10.5 for outstanding performance in aggressive acid environments, ensuring long-lasting corrosion resistance and peace of mind. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!

ARCOR® S-15 is a solvent-free bisphenol F coating specifically designed for both immersion and non-immersion service, particularly in aggressive and alkali environments. This coating forms a durable, chemical-resistant barrier on ferrous metals and concrete surfaces. With its low viscosity and excellent flexibility, ARCOR® S-15 is well-suited for large tank linings and secondary containment concrete applications. It can be applied by hand or spray on both metals and concrete surfaces. The extended pot-life and overcoat window of this coating make it an ideal choice for larger surface area applications using airless or plural component spray methods. Choose ARCOR® S-15 for its reliable protection, chemical resistance, and versatility in handling various immersion and non-immersion service requirements, ensuring long-lasting durability and performance. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!

ARCOR® EE-93 is a solvent-free, two-component rebuilding compound specifically designed to withstand high levels of abrasion, erosion, and cavitation. This remarkable product is a Novolac Epoxy filled with spherical cubic zirconium, providing it with the utmost chemical, heat, and abrasion resistance achievable in an epoxy system. Its self-wetting formulation allows for application without the need for a primer, and it can be smoothly leveled to achieve a seamless finish, eliminating the requirement for a top coat. ARCOR® EE-93 significantly reduces application and turnaround time while delivering exceptional performance. It is the ideal choice for environments that demand superior durability and efficiency. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!

ARCOR® EE-11 is a high-performance, solvent-free epoxy Novolac coating that combines ceramic fillers and advanced functionality. It is specifically formulated for both immersion and non-immersion service, particularly in aggressive environments characterized by acids, alkalis, elevated temperatures, and abrasion. By applying ARCOR® EE-11, you can achieve a tough and chemical-resistant protective coating on a wide range of surfaces, including ferrous and non-ferrous metals as well as concrete structures. The integration of Reactive Flexibilizing agents ensures excellent flexibility without compromising its chemical and temperature resistance properties, making it an ideal choice for large tank walls and floors, eliminating the need for fiberglass mat reinforcement. With its low viscosity, ARCOR® EE-11 can be conveniently applied by hand or spray at thicknesses of up to 80 mils per coat, providing reliable protection in demanding applications. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!

ARCOR® S-16 is a solvent-free epoxy coating specifically designed to provide reliable protection for metals in immersion service. This advanced coating solution creates a durable, chemical-resistant, and flexible barrier, making it highly suitable for aggressive water environments, including salt and brackish water conditions. The multi-functional chemistry of ARCOR® S-16 enables it to serve as a versatile coating, offering excellent performance in moderate acid and caustic environments, as well as in water applications. It is a fine choice for various general-purpose epoxy coating needs. Moreover, ARCOR® S-16 holds several certifications, including NSF certification for potable water, USDA approval for incidental food contact in meat and poultry production, and compliance with FDA Guideline CFR 21 Section 175.300, allowing for repeated food contact use. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!

ARCOR® EE-99KC is an Epoxy Rebuild compound designed for rapid set and cure, making it comparable to our EE-94 in resin design. It features a similar loading and mesh size of Ceramic Beads, ensuring high performance. With its self-wetting formulation, this compound can be applied without a primer and is suitable for vertical and overhead applications up to +3/4″ (750 mils, 18.75mm) thickness. It can be easily leveled to a smooth finish, eliminating the need for a topcoat and significantly reducing application and turnaround time. ARCOR® EE-99KC offers a convenient 2:1 mix ratio by weight and volume, making it ideal for easy breakdown in-field. Its rapid curing properties allow for a return to service in as little as 1 hour, ensuring minimal downtime. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!

ARCOR® S-26 is a solvent-free epoxy Novolac blend specifically formulated as a protective coating for metals in highly aggressive environments, particularly those characterized by combinations of chemical exposure, abrasion, and temperature extremes. It exhibits exceptional performance in a wide range of chemical substances. The ARCOR® S-26 is designed to be applied as a single coat using a spray or as a two-coat system applied by hand. It can be conveniently applied up to 30 mils per coat by hand (40 mils by spray) without experiencing slump. ARCOR® S-26 provides reliable protection for metals in demanding environments, ensuring durability and resistance against various aggressive factors. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!

ARCOR® EE-94 is a solvent-free, two-component rebuilding compound specifically designed for harsh environments with high abrasion, erosion, and impact. This remarkable compound is a Novolac Epoxy filled with ceramic beads, providing the utmost level of chemical, heat, and abrasion resistance achievable in an epoxy system. With its self-wetting formulation, it can be applied directly without the need for a primer. It is also capable of being applied at a thickness of 1" (1000 mils) on both vertical and overhead surfaces. Furthermore, ARCOR® EE-94 can be easily leveled to achieve a smooth finish, eliminating the requirement for a topcoat. By doing so, it significantly minimizes application time and turnaround. ARCOR® EE-94 is the ideal choice for applications demanding superior durability and efficiency. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!