Products in Advanced Materials: Epoxy & Epoxy Derivatives

MC511SN, StatNot™, is a static dissipative epoxy, woven glass based material with excellent control of the static dissipative properties. This material is used where static dissipation is required from surfaces to surface of the composite, in the x, y and z directions.

MC511AF is a high strength, medium weave glass epoxy laminate that retains a minimum of 50 percent of its room temperature flexural strength when tested at 150ºC. Typical applications include insulation in power generation equipment and other structural applications when used in elevated temperatures. MC511AF is certifiable to MIL-I-24768/3, Type GEB.

MC511A is a high strength, glass epoxy laminate that is specially formulated to meet power generation producer’s exacting standards where higher strength at elevated temperatures are required. MC511A is certifiable to MIL-I-24768/3, Type GEB, IEC-60893-3-2 EP GC 203 and is halogen free to meet the European restrictions.

APCM DA 4092 is modified epoxy pre-impregnated system which can cure at 250°F (121°C) for one hour. DA 4090 | DA 4092 can be supplied on any commercially available glass, Kevlar, or graphite fabric. DA 4090 is a one sided pre-impregnated fabric yielding a single sided tack material. DA 4092 is the same system where both sides of the fabric are pre-impregnated yielding a double sided tack material. Both prepreg systems can be used for laminating and honeycomb sandwich construction.

APCM DA 4518U is a tough, versatile, modified epoxy resin system that cures at 250°F to 350°F. DA4518U can be supplied as a prepreg tape coated on unidirectional graphite.

FR408 low dielectric constant (Dk) and low dissipation factor (Df) make it an ideal candidate for broadband circuit designs requiring faster signal speeds or improved signal integrity. FR408 is compatible with most FR-4 processes. This feature allows the use of FR408 without adding complexity to current fabrication techniques.

Cecence Limited 12K twill x 1P PRE PRESS is a thermoformable epoxy resin system which has excellent shock resistance and durability. Molding temperature is low resulting in ease of deformation & thermal deformation is possible after hardening. Lightweight, non rusting, Acid & alkali resistant. Self Extinguishing.

APCM DA 409U/S2-glass is a tough, versatile, modified epoxy resin prepreg that cures at 250ºF. The S-2 glass is a Zentron High Strength fiber. Standard weight is 260g/m2 with a 38% resin content. Other weights and resin contents available upon request.

PRF Composite Materials RP522 is made up of Woven fabrics which is used for General and Industrial Purpose.

SYMPOXY 1225FR-CA561 is a filled, two component epoxy system that is pigmented black.

AX-4112T is a High Performance, Toughened Epoxy Aramid Prepreg.

Cecence Limited 60K 25mm PRE PRESS is a thermoformable epoxy resin system which has excellent shock resistance and durability. Molding temperature is low, and allows for reforming after it has set. Lightweight, non rusting, high compression strength. Penetration, acid & alkali resistant.

Cecence Limited 60K 25mm POST PRESS is a thermoformable epoxy resin system which has excellent shock resistance and durability. Molding temperature is low, and allows for reforming after it has set. Lightweight, non rusting, high compression strength. Penetration, acid & alkali resistant.

Cecence Limited 12K twill x 3P POST PRESS is a thermoformable epoxy resin system which has excellent shock resistance and durability. Molding temperature is low resulting in ease of deformation & thermal deformation is possible after hardening. Lightweight, non rusting, Acid & alkali resistant. Self Extinguishing.

Biresin® CR131 is an epoxy resin system suitable for the production of high performance fiber reinforced composites parts and molds with thermal properties up to 130°C.

Ultracor UCF-290-1.0-2.0 is used in structural applications where high mechanical performance is paramount and low density remains a primary concern.

PRF Composite Materials RP549 is a highly toughened modified epoxy prepreg that has been specially formulated for the production of components requiring high mechanical properties and good impact resistance, particularly those exposed to elevated temperatures. This new system has an >200°C Tg following the 180°C cure cycle, and provides excellent mechanical properties in tensile, ILS and flexural strength. RP549 is now in manufacture on a range of our high quality woven fabrics.

AX-4270 is Structural Epoxy Aramid Prepreg.

Ultracor UCF-278-3/8-3.5 is used in structural applications where high mechanical performance is paramount and low density remains a primary concern.

APCM DA 4082 is 200°F cure modified epoxy prepreg system which can be prepreged on fiberglass fabric, woven Kevlar, or other woven fabrics. In addition to their low temperature cure capabilities, DA 4080 prepregs have excellent flow to allow for vacuum bag cure conditions. DA 4080 is a one sided pre-impregnated system yielding a single sided tack material. DA 4082 is the same system except that both sides of the fabric are coated yielding a double sided tack material. Both prepregs can be used for laminating and honeycomb sandwich construction.

APCM DA 409U/G35-150 is a tough, versatile, modified epoxy resin prepreg that cures at 250°F, a standard modulus 150 g/m2 carbon prepreg tape which can also be supplied as a 200g/m2 or a 300 g/m2 prepreg.

APCM DA 4517 is an epoxy prepreg designed for a temperature range of -67°F (-55°C) to 350°F (177°C), with a cure of 180°F (82°C) for three hour. Shorter cures times are available at higher temperatures. The system is designed to be post cured if the higher temperature service range is required.

Cecence Limited 3K plain x 3P POST PRESS is a thermoformable epoxy resin system which has excellent shock resistance and durability. Molding temperature is low resulting in ease of deformation & thermal deformation is possible after hardening. Lightweight, non rusting, Acid & alkali resistant. Self Extinguishing.

APCM DA 4090 is modified epoxy pre-impregnated system which can cure at 250°F (121°C) for one hour. DA 4090 | DA 4092 can be supplied on any commercially available glass, Kevlar, or graphite fabric. DA 4090 is a one sided pre-impregnated fabric yielding a single sided tack material. DA 4092 is the same system where both sides of the fabric are pre-impregnated yielding a double sided tack material. Both prepreg systems can be used for laminating and honeycomb sandwich construction.

AX-4110 is a Toughened, Flame Retardant Epoxy Aramid Prepreg.

55NT is an epoxy laminate and prepreg system, reinforced with a non-woven aramid substrate. This system combines compatibility with lead-free processing, using a hightemperature epoxy resin, with the low in-plane (x,y) expansion and outstanding dimensional stability of non-woven aramid reinforcement.

PRF Composite Materials RP442 is designed to give an initial cure at low temperatures with enhanced toughness and higher service temperature, giving great flexibility in component manufacture. The system also has a longer out life for a low temperature system: up to 30 days at 20°C. RP442 can be supplied on a variety of PRF’s high quality reinforcement fabrics.

APCM DA 4518 is an epoxy prepreg designed for a temperature range of -67°F (-55°C) to 350°F (177°C), with a cure of 250°F (121°C) for one hour and or a cure of 350º F (177ºC) for 1 hour. This material needs to be post cure or cured to 350ºF to get the 350º properties.

APCM DA 4080 is 200°F cure modified epoxy prepreg system which can be prepreged on fiberglass fabric, woven Kevlar, or other woven fabrics. In addition to their low temperature cure capabilities, DA 4080 prepregs have excellent flow to allow for vacuum bag cure conditions. DA 4080 is a one sided pre-impregnated system yielding a single sided tack material. DA 4082 is the same system except that both sides of the fabric are coated yielding a double sided tack material. Both prepregs can be used for laminating and honeycomb sandwich construction.

APCM DA 4518 E-Glass is a modified epoxy system coated on heavy weight unidirectional E-Glass fibers. This product is designed to build excellent unidirectional strength using a minimum number of plies. DA 4518/E-Glass Uni also features extended room temperature out time and service temperatures to 300°F.

Magna-Tac™ A-39 is a 100% -solids, two-component, solvent-free, formulated epoxy adhesive in paste form specifically designed for metal-to-metal applications and for bonding other rigid materials such as glass, plastics, wood and structural laminates based on glass or fiber reinforced melamine, silicone, polyester, phenolic, epoxy, etc. resins. This adhesive may be cured at room temperature or at elevated temperatures, depending on manufacturing conditions, properties desired and on service requirements for the finished assembly.

Cecence Limited 12K twill x 1P POST PRESS is a thermoformable epoxy resin system which has excellent shock resistance and durability. Molding temperature is low resulting in ease of deformation & thermal deformation is possible after hardening. Lightweight, non rusting, Acid & alkali resistant. Self Extinguishing.

Cecence Limited 60K 50mm PRE PRESS is a thermoformable epoxy resin system which has excellent shock resistance and durability. Molding temperature is low, and allows for reforming after it has set. Lightweight, non rusting, high compression strength. Penetration, acid & alkali resistant.

Cecence Limited 60K 50mm POST PRESS is a thermoformable epoxy resin system which has excellent shock resistance and durability. Molding temperature is low, and allows for reforming after it has set. Lightweight, non rusting, high compression strength. Penetration, acid & alkali resistant.

Park’s E-722 is a modified 350°F cure epoxy system with excellent processing characteristics for vacuum bag, press, and autoclave molding.

Magna-Tac™ A31 adhesive is a two-part, room temperature curing, epoxy resin formulation for general purpose applications. It is thixotropic with a creamy or buttery consistency that is easy to work and apply. Higher temperatures do not affect the thixotropy, tending, on the contrary, to inhibit flow further. Color is neutral.