Products in Other Industrial Applications

Todos Chemical TODOSORB-329/5411 is a unique photostabilizer that is effective in a variety of polymeric systems; particularly in polyesters, polyvinyl chlorides, styrenics, acrylics, polycarbonates, and polyvinyl butyal.

Ease Release® 6577-5 is a superior release agent for casting complex designs using polyurethane elastomers.

Starbetter Chemical Materials Antimony Based Flame Retardant Synergist ST-FS-A2T has most formulas are using antimony trioxide (ATO) as flame-retardant synergist in halogen system. Meanwhile, the price of ATO is increasing rapidly and unpredictable and the antimony resource is getting less. It leads to the higher cost for most flame-retardant compounding manufacturers. Replace ATO with ST-FS-A2T, it can not only save the cost, but also decrease content of Pb, As and Hg. ST-FS-A2T can also improve the anti-aging and UV-resistant properties of flame-retardant compounding materials, but ATO has no such good properties. MAH or GMA functional group modifiers are recommended in the formula for good properties. This product is not suitable for PC (polycarbonate resin).

G&E 1847 BMB is mechanically mixed SBR Black masterbatch. This material can be used to replace SBR-1847 coprecipitated masterbatch in most applications. G&E 1847 contains 100 parts SBR, 75 parts of N-300 series carbon black, and 50.0 parts Highly Aromatic Oil .

Sunvin 26 is a benzotriazole type UV absorber. It offers superior light protection of polyolefin substracts against the deterioration of UV radiation, It is also efficient for the light stabilization of polyvinyl chloride, unsaturated polyurethane, styrenic polymers, coatings and lacquers.

TRACEL® G 3191 SVA is Tramaco's foaming agents for PVC-extrusion are adapted to match diverse stabilizer systems and foaming processes (free foam, celuka, coextrusion). For a consistent dosage our foaming agents are available in various delivery forms and with different active agent content. The foaming agents can be delivered in customized preweighed meltable sachets. Our technical service team is looking forward to give you qualified and solution-oriented advice.

Urochem Molding Compound 134 by BI-QEM is a urea formaldehyde resin with melamine resin. It is filled with cellulose and modified with special purpose additives, pigments, cure regulators and lubricants. It offers high hardness, glossy surface, excellent scratch resistance and excellent chemical resistance. It provides excellent electrical properties and resistance against surfactants & weak bases. It is designed for processing by injection molding. The molded products can be recycled and exhibits good UV stability with good moisture resistance. Urochem Molding Compound 134 is recommended for electrical components such as sockets, lamp holders, and domestic circuit breakers. Its shelf life is of 12 months below 20°C.

Metox 50 is peroxide initiator for copolymerization of unsaturated resins polyester. They are mainly used with cobalt accelerators at temperature surroundings. They are suitable for manual and spray lamination. Due to the lowered water content Metox-50 is recommended for hardening polymer concrete and some concrete polyester varnishes and others.

Endex 4221™ is a high efficiency pelletized concentrate, in a thermoplastic polymer carrier. It is designed for use in both commodity and engineering plastics, and may be dried with the polymer if needed. It combines its endothermic properties, quality and efficiency, with versatility and cost-effectiveness.

G&E 1605 BMB is mechanically mixed SBR Black master batch. This material can be used to replace SBR-1605 co-precipitated master batch in most applications. G&E 1605 contains 100 parts of non-staining SBR and 50 parts of N-500 series Carbon Black.

Changshu Yitong Polyurethane Product YT-1080 is regid blend polyether polyols which are used in framed pictures, phanters, sculptures, etc.

The compound NEXA® PFX 8010 is an excellent chemical resistant Perfluoroelastomer (FFKM). It has been designed for very demanding sealing applications in aggressive chemical environments. PFX 8010 can withstand very aggressive conditions, such as almost all chemical species, hot organic and inorganic acids, alkalis, ketones, esters, alcohols, fuels and water steam up to 210°C.

PAR Group Nylon 6 Metal Detectable Sheet is a popular engineering plastic due to its ease of machinability. It combines high strength, stiffness and hardness properties with good creep and wear resistance. Our highly visible blue metal detectable Nylon 6 contains very fine material additives making it detectable to most metal detector equipment. It also has lower moisture absorption than standard nylon 6.

Rhino Linings USA, Inc. 1320 Resin is a Ultra Low Viscosity Epoxy Resin. Ultra low viscosity epoxy for infusion. Used for producing composite laminates using injection or vacuum infusion techniques at ambient temperature.

Counter Rust 7056 is a cost effective additive for the formulation of corrosion inhibitors.

Functionalized compound based on PA 6.6 with high thermal conductivity. Electrically insulating, good value for money.

Aronkasei AR-750 is styrene type elastomer AR.

PETOL 56-2A is a high purity polyoxypropylene glycol, with a molecular weight of 2000.PETOL 56-2A is a homopolymer diol. The product is acidified by the supplier and does not request acidification by the customer.

Flaurea Chemicals Cadmium oxide is for NiCd batteries, PVC stabilizers, industrial paint pigments, surface treatment, electric relays, and so on and so forth.

Rokem TBBS is N-tert-butylbenzothiazole-2-sulfenamide, a grayish-white powder or granular accelerator.

SAMBARK LFT PP1320N is the product of injection moldable (Long-Fiber reinforced Thermoplastics) resin manufactured with a unique pultrusion technology. LFT is supplied as pellets from 6mm to 25mm long with same length of glass fibers. LFT is ideal for structural parts in automotive and industrial application. LFT is a new material that can reduce weight & cost by replacing of heavy materials.

Styrol-Acrylnitril abbreviated as SAN.

Flontech PTFE FT-CF10-1 contains features such as thermal expansion 10% greater than that of metallic materials, low abrasion resistance, starting from a certain load level it becomes permanently deformed due to cold flow, low thermal and electrical conductivity.

Aluminium flake powder

M5005L is a Narrow MWD HDPE produced by Spherilene Technology M5005L is recommended for injection molding of heavy duty Crates, Industrial products and for injection molded as well as extrusion compression molded caps for packaged drinking water The precise control of morphology & MWD during polymerization confers superior processability & improved performance properties compared to conventional HDPE grades

Tina Organics Trixylenyl Phosphate is developed mainly for Oil Industry users, meeting the standard of air release.

TECACOMP PA66 TC gray 4081 is a Polyamide 66 (PA 66) reinforced with mineral. It is suitable for injection molding.

JYANOX 697 Antioxidant used as polymer materials of the antioxidant and metal deactivator.

PPS-SG301A65 is a 30% glass fiber reinforced linear polyphenylene sulfide compound developed to provide toughness,high flow,temperature and chemical resistant and excellent processability

Intermediate Chemicals Zinc Oxide Granular is made from white granules and used in such application where properties such as free flow, low dusting and low bulk are required, in the following industries. It is used in rubber, paints, ceramic, glass.

ULTRA-LUBE™ IMX is a highly effective internal lubricant and dispersing aid for specialty elastomers, like HNBR, XNBR, ECO and exotic polymers. ULTRA-LUBE™ IMX is a synergistic blend of primary amide and a highly thermal stable fatty acid derivative, thus shrinkage after post curing will not be affected. ULTRA-LUBE™ IMX improves mold and extrusion flow, prevents sticking on metallic surfaces and greatly enhances surface feel and finish of finished rubber articles.

Intergulf Empol AD-LDP-PPA-25001 is a PPA with base polymer PE and 2% active content.

PP glass fiber 20% reinforced

Blendex® SS 350 is used for General purpose and it has Improved melt strength, efficient.

PLASTICYL™ LDPE2001 is a conductive masterbatch based on Low Density Polyethylene (LDPE) loaded with 20% of Nanocyl’s MWCNTs (NC7000™). Because of its low viscosity and high flow, PLASTICYL™ LDPE2001 is ideal for injection molding and extrusion processes.

Gchemical Company GPRC-2720 is an antifoam defoamers used in caustic towers, glycol. It acts as a blend for poly-glycols and esters.