Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Key Features of ABS Sheet
- Temperature: -20°C up to +80°C.
- High wear and fatigue resistance.
- Lower moisture absorption compared to standard nylon 6 grades.
- Contains additives that are identifiable in metal detector scanning equipment.
- Also detectable by X-ray equipment.
- Easily machined.
- Food approved.
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Applications
Rollers, gears, pulleys, thrust washers, seals and many other components for use within the food, drink and pharmaceutical industry.
Properties
- Flame Rating
- Physical Form
- Mechanical Properties
- Typical Properties
- Thermal Properties
- Flammability
| Value | Units | Test Method / Conditions | |
| Tensile Strength | 88 | MPa | ISO 527-1/-2 (7) |
| Tensile Strain (Elongation) at Yield | 3.6 | % | ISO 527-1/-2 (7) |
| Tensile Strain (Elongation) at Break | 7 | % | ISO 527-1/-2 (7) |
| Tensile Modulus of Elasticity | 4000 | MPa | ISO 527-1/-2 (9) |
| Compressive Stress at 1 / 2 / 5 % Nominal Strain | 34 / 70 / 94 | MPa | ISO 604 (10) |
| Charpy Impact Strength - Unnotched | 46 | kJ/m2 | ISO 179-1/1eU |
| Charpy Impact Strength - Notched | 3 | kJ/m2 | ISO 179-1/1eA |
| Flexural Strength | 128 | MPa | ISO 178 (12) |
| Flexural Modulus of Elasticity | 3800 | MPa | ISO 178 (12) |
| Rockwell M Hardness (14) | 86 | — | ISO 2039-2 |
| Value | Units | Test Method / Conditions | |
| Density | 1.29 | g/cm3 | ISO 1183-1 |
| Water Absorption after 24h Immersion in Water of 23°C (73°F) | 1.14 | % | ISO 62 (16) |
| Water Absorption at Saturation in Water of 23°C (73°F) | 6.9 | % | — |
| Wear Rate | 6 | μm/km | ISO 7148-2 (18) |
| Dynamic Coefficient of Friction | 0.26 - 0.83 | — | ISO 7148-2 (18) |
| Value | Units | Test Method / Conditions | |
| Melting Temperature (DSC, 10°C (50°F) / min) | 220 | °C | ISO 11357-1/-3 |
| Coefficient of Linear Thermal Expansion (23 to 60°C) (73 to 140°F) | 90 | μm/(m.K) | — |
| Coefficient of Linear Thermal Expansion (23 to 100°C) (73 to 210°F) | 100 | μm/(m.K) | — |
| Heat Deflection Temperature: method A: 1.8 MPa (264 PSI) | 82 | °C | ISO 75-1/-2 |
| Continuous Allowable Service Temperature in Air (20,000 hours) (3) | 80 | °C | — |
| Min. Service Temperature (4) | -20 | °C | — |
| Value | Units | Test Method / Conditions | |
| Flammability (3mm (1/8 in.)) (5) | HB | — | UL 94 |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Availability
Sheet Size (mm) Sheet Thickness (mm) - 16 20 25.4 3000 x 610 Yes Yes Yes 1000 x 610 Yes Yes Yes denotes available
No denotes unavailable