Products in Paper & Pulp: Aluminum Compounds

USALCO Dry Aluminum Sulfate (Purified Grade) is manufactured to meet high-quality standards using advanced processes and premium raw materials. It comes in various grades, including low-iron, iron-free, and FCC grades, and in special granular sizes to meet diverse needs. It is utilized in industries such as water treatment, dye production, leather tanning, papermaking, and others. This dry alum meets the American Water Works Association Standard B403-16 and follows NSF/ANSI/CAN 60: Drinking Water Treatment Chemicals - Health Effects with a maximum recommended dosage of 150 mg/L.

USALCO Dry Aluminum Sulfate (Rice Grind) is manufactured using state-of-the-art processes and high-quality raw materials to ensure that the product meets the highest quality standards. USALCO offers various grades of dry alum, including low-iron, iron-free, and FCC grades, as well as specialty granular sizes to meet a wide range of applications. This product is used in water treatment, dye production, leather tanning, and papermaking, among other industrial applications. It meets the specifications of the American Water Works Association Standard B403-16 and complies with the requirements of NSF/ANSI/CAN 60: Drinking Water Treatment Chemicals - Health Effects with a maximum recommended dosage of 150 mg/L.

USALCO Dry Aluminum Sulfate (Low Iron Grade) is produced using advanced techniques and high-quality materials to meet the highest quality standards. USALCO also produces dry alum in various other grades (iron-free and FCC-grade) and custom granular sizes to meet a wide range of applications. This product is used in water treatment, dye production, leather tanning, papermaking, and other industrial applications. It adheres to the American Water Works Association Standard B403-16 and meets the requirements of NSF/ANSI/CAN 60: Drinking Water Treatment Chemicals - Health Effects with a maximum dosage limit of 150 mg/L.

USALCO Aluminum Sulfate Solution is manufactured by dissolving alumina trihydrate (ATH) in water and sulfuric acid. To ensure the highest quality of this product, stringently selected raw materials and state-of-the-art manufacturing practices are used. USALCO Alum meets the specifications of the American Water Works Association Standard B403‐16 and complies with the requirements of NSF/ANSI/CAN 60: Drinking Water Treatment Chemicals ‐ Health Effects at a maximum dosage of 150 mg/L.

USALCO Dry Aluminum Sulfate (Iron Free Grade) is manufactured using a state-of-the-art process and high-quality raw materials, which ensures that the product meets the highest quality standards. USALCO also produces dry alum in various other grades (low-iron and FCC-grade) and in specialty granular sizes to satisfy even the most difficult applications. USALCO's dry alum is used in water treatment, colors and dyes, leather tanning, papermaking, and many other industrial applications. It meets the specifications of the American Water Works Association Standard B403-16 and complies with the requirements of NSF/ANSI/CAN 60: Drinking Water Treatment Chemicals - Health Effects at a maximum dosage of 150 mg/L.

USALCO Aluminum Sulfate Solution (Acidified) is produced by dissolving alumina trihydrate in water and sulfuric acid. Only the finest raw materials and advanced manufacturing techniques are used to ensure the top-notch quality of this product. It conforms to the specifications outlined in the American Water Works Association Standard B403-16 and satisfies the criteria set forth in NSF/ANSI 60: Drinking Water Treatment Chemicals - Health Effects with a maximum dose of 150 mg/L.

USALCO Aluminum Chloride is a solution that is very effective in drinking water treatment, removal of phosphorus from municipal/industrial wastewater, and as an intermediate chemical in the manufacturing of various products. This product complies with the requirements of NSF/ANSI/CAN 60: Drinking Water Treatment Chemicals - Health Effects at a maximum dosage of 250 mg/L.

USALCO Sodium Aluminate Solution (45%) is an economical source of highly reactive alumina manufactured by dissolving alumina tri‐hydrate (ATH) into sodium hydroxide and water. USALCO 45 is also stabilized to prevent alumina from precipitating. The use of only stringently selected raw materials and state‐of‐the‐art manufacturing practices ensures that USALCO 45 is of the highest quality. USALCO 45 meets the specifications of the American Water Works Association Standard B405‐16 and complies with the requirements of NSF/ANSI/CAN 60: Drinking Water Treatment Chemicals ‐Health Effects at a maximum dosage of 89 mg/L.

USALCO Sodium Aluminate Solution (38%) is an economical source of highly reactive alumina manufactured by dissolving alumina tri‐hydrate (ATH) into sodium hydroxide and water. USALCO 38 is also stabilized to prevent alumina from precipitating. The use of only stringently selected raw materials and state‐of‐the‐art manufacturing practices ensures that USALCO 38 is of the highest quality. USALCO 38 meets the specifications of the American Water Works Association Standard B405‐16 and complies with the requirements of NSF/ANSI/CAN 60: Drinking Water Treatment Chemicals ‐Health Effects at a maximum dosage of 105 mg/L.

ALOX 100 is an ultrafine fumed metal oxide with a high specific surface area. Due to its unique properties including the electropositive chargeability, ALOX 100 brings specific attributes to a variety of applications like high purity, ultrafine particle size, low bulk density and positive surface charge.

ALBA 8L is a solvent-based, standard leafing aluminum paste with a super finesse. It is recommended for paper coatings, spray cans, and for printing inks.

ALBA 5L is a solvent-based, standard leafing aluminum paste with a fine finesse. It is recommended for roof coatings, containers, pipes, tanks, marine coatings, thermo resistant coatings, general industrial coatings, and paper coatings.

NYACOL® AL25 have been developed utilizing new innovative technology for colloidal alumina. AL25 is a colloidal dispersions of boehmite with dispersed sizes of 70-80 nm at 20% Al2O3 content. Typically AL25 will have up to 500 ppm Na content.

ULTRAFLOC 3750 is a aluminum chlorohydrate coagulant designed to provide superior coagulation for clarification of raw water and effluent water.

ULTRAFLOC 3000 is a liquid, cationic aluminum based coagulant designed to provide superior coagulation for clarification of raw water and effluent water.

Xyal® 100 is very fine, high-purity aluminum oxide(Al2O3) with a high specific surface area, maked aggregate and agglomerate structure. Due to the electropositive chargeability and unique particle characteristics, XYAL100 leads to specific properties in various applications.

May Asit Kimyevi Aluminum Sulfate is an industrial chemical used as a flocculating agent in the purification of drinking water and waste water treatment plants, and also in paper manufacturing. It is used as a mordant in dyeing and printing textiles. Aluminum sulfate is the active ingredient of some antiperspirants. It is usually found in baking powder, where there is controversy over its use due to concern regarding the safety of adding aluminum to the diet. In construction industry it is used as waterproofing agent and accelerator in concrete. Another use is a foaming agent in fire fighting foam. It is also used in styptic pencils, and pain relief from stings and bites. It can also be very effective as a molluscicide, killing spanish slugs.

ULTRAFLOC 3600 is a aluminum chlorohydrate coagulant designed to provide superior coagulation for clarification of raw water and effluent water.

ALBA 7M is a solvent-based, standard non-leafing aluminum paste with a super finesse. It is recommended for polychromatic finishes, can/coil coatings, spray cans, paper coatings, and printing inks.

HisarCal® Ex-99 is used in the paper sector. Micronized calcite is used in the production of writing paper, wall paper, and cardboard by adding 15-30% cellulose. Because of its high whiteness, low cost, and other technical properties that it provides to paper, it has entered the paper sector and replaced kaolin in the last ten years all over the world, beginning in Europe.

SODASIL® P95 is a Amorphous aluminum and sodium silicate obtained by precipitation in an aqueous medium.

ALBA 6M is a solvent-based, standard non-leafing aluminum paste with a lining finesse. It is recommended for polychromatic finishes and can/coil coatings, spray cans, paper coatings, and printing inks, and is suitable for general industrial coatings.

Alba PremiumFC6L is a solvent-based, food contact safe, standard leafing aluminum paste with a lining finesse. It is recommended for special coatings for food contact and paper coatings for food contact, and is suitable for gravure printing inks and food contact printing inks.

ULTRAFLOC 3800 is a aluminum chlorohydrate coagulant designed to provide superior coagulation for clarification of raw water and effluent water.

HisarCal® St-3 is used in the paper industry. By adding 15-30% to cellulose, micronized calcite is used primarily in the production of writing papers, wallpapers, and cardboard. Because of its high whiteness, low cost, and other technical benefits to paper, it has replaced kaolin in the paper industry over the last ten years, beginning in Europe.

Niknam Chemicals Aluminum Trihydrate is available in different uncoated and coated grades, with average particle size varying from 2 microns to 80 microns as per application. Aluminum Trihydrate is a common primary ingredient present in most solid surface material and accounts for as much as 70% of the total product. We formulate and export a wide range of Aluminum Trihydrate.

ULTRAFLOC 3500 is a aluminum chlorohydrate coagulant designed to provide superior coagulation for clarification of raw water and effluent water.

ULTRAFLOC 3780 is a aluminum chlorohydrate coagulant designed to provide superior coagulation for clarification of raw water and effluent water.

Micronized Products Supersilk is an aluminum silicate mineral. It is characterized by its softness and platy or lamellar physical structure. Supersilk offers good dry brightness (whiteness) and chemical stability.

Niknam Chemicals Flamex is a one pack smoke supperesant. We manufacture and export a wide range of Flamex/ FLame Guard. Flamex is an aluminum, zinc & magnesium inorganic complex synergist, which has superior flame retardance as compared to traditional synergists, and dramatically reduces smoke in PVC FRLS Compound. Flamex is also a very effective flame retardant in rigid PVC (UPVC) system without the need for Antimony Trioxide. Commonly known as Flamex.

ALBA 5M is a solvent-based, standard non-leafing aluminum paste with a fine finesse. It is recommended for general industrial coatings, marine coatings, thermo resistant coatings, and paper coatings, hammer topcoats, polychromatic finishes and can/coil coatings, and is suitable for spray cans and printing inks

ALBA 6L is a solvent-based, standard leafing aluminum paste with a lining finesse. It is recommended for paper coatings and spray cans, and is also suitable for printing inks.

DISPERCEL NC 6029/Op (Alluminosilicate)is applied in flexographic and rotogravure inks for paper, aluminum and different types of plastic films. Wood lacquers and coatings, cosmetic application (i.e. nail lacquers, etc.)

Alba PremiumFC6M is a solvent-based, food contact, standard non-leafing aluminum paste with lining finesse. It is recommended for special coatings and paper coatings for food contact, and is suitable for gravure printing inks and printing inks for food contact.

PURMOL® Powder and Paste from Zeochem AG are molecular sieve powders and pastes which give the answer to moisture scavenging problems for a variety of applications. Powder types 3A and 4A are available in standard version or synthesized and treated for special applications. Some grades can even be used in the cosmetic field (face masks) or as additive in ointments and creams for warming up.

ALBA 3M is a solvent-based, standard non-leafing aluminum paste with a medium fine finesse. It is recommended for general industrial coatings, marine coatings, thermo resistant coatings, and paper coatings, and it is also suitable for hammer topcoats.