Products in Paper & Pulp

MAKON® 8 serves similarly to makon® 12, functioning as a high-active nonionic surfactant with versatile applications. Its use spans agricultural applications, detergents, sanitizers, industrial cleaners, metal cleaners, textiles, and paper deinking. Just like MAKON® 8's counterpart, it holds kosher certification.

IGEPAL CO-530 is a nonionic surfactant with diverse applications, including paper processing and industrial metal cleaning. It's employed as an emulsifier for silicones and agricultural chemicals, serving as an oil-soluble surfactant, emulsifying agent, detergent, and dispersing agent for petroleum oils. Classified within the chemical group of nonylphenol ethoxylates, its primary function centers around being a deinking agent, which is particularly relevant in paper processing.

IGEPAL CO-430 is a nonionic surfactant used as a defoaming agent in low-foaming detergents and cold-water cleaners. It also functions as a dispersing agent for petroleum oils and as a co-emulsifier in nonionic surfactant blends. It has applications in paper processing, industrial metal cleaning, and textile applications.

VINNAPAS® EP 4600 is a vinyl acetate-ethylene (VAE) copolymer dispersion stabilized with polyvinyl alcohol. It possesses a glass transition temperature (Tg) of +5°C. This dispersion was specifically formulated to have a low viscosity and high solids content, allowing it to accommodate high levels of fillers.

VINNOL® H 30/48 M is a terpolymer consisting of approximately 70 wt.% vinyl chloride (VC), 29 wt.% vinyl acetate (VAc), and 1 wt.% dicarboxylic acid. It contains carboxylate groups within its structure. This product is primarily employed as a binder for surface coating compounds and printing inks. VINNOL® H 30/48 M acts as a thermoplastic, physically drying binder that forms a film upon evaporation of the solvent in the formulation.

VINNAPAS® EP 708 (NJG) is a high-viscosity vinyl acetate-ethylene copolymer dispersion. It demonstrates excellent machinability and strong wet tack. Additionally, it offers enhanced adhesion to films, including polyvinyl chloride. VINNAPAS® EP 708 (NJG) is chemically stable at both high and low pH. It has very high plasticizer and solvent viscosity thickening responses. It is compatible with an assortment of resins, solvents, plasticizers, and other modifiers, as well as the other VINNAPAS® EP dispersions.

SILFAR® 350 is a polydimethylsiloxane derived from the hydrolysis and polycondensation of dichlorodimethylsilane and chlorotrimethylsilane. Its degree of polymerization (n) is adjusted to achieve a mean kinematic viscosity of 350 mm²/s at 25°C. This versatile product finds application in both the pharmaceutical and food sectors. In the pharmaceutical industry, it is commonly used in antiflatulence and antacid preparations.

VINNAPAS® 920 is a carboxylated, poly(vinyl alcohol) stabilized, vinyl acetate-ethylene (VAE) copolymer dispersion with a glass transition temperature (Tg) of -20 °C. It offers excellent flow, wetting, and adhesion to a wide variety of polymeric films, coatings, and other difficult substrates.

VINNOL® H 15/45 M Special is a specialized carboxylate-containing terpolymer composed of approximately 84 wt.% vinyl chloride (VC), 15 wt.% vinyl acetate (VAc), and 0.5 wt.% dicarboxylic acid. Its primary application is as a binder for surface coating compounds and printing inks. This thermoplastic and physically drying binder creates a film as the solvent within the formulation evaporates.

WACKER® L 057 is a 100% water-dispersible, hydrolytically stable polyether-functional polydimethylsiloxane. WACKER® L 057 can be used in a wide range of applications, such as the textile industry, polishes, cleaners, and the plastics industry. WACKER® L 057 exhibits both special lubricant properties and antistatic action.

SILFAR® E 1049 is a silicone fluid emulsion specifically formulated for a wide range of applications, including those in the food and pharmaceutical industries. It is composed of components that meet the necessary standards outlined in the relevant EP and USP monographs. SILFAR® E 1049 can be utilized as an excipient in pharmaceutical products, although it cannot be used as an active pharmaceutical ingredient.

DEHESIVE® 924 US is a 100% solvent-free, addition-curing silicone intended for coating paper and other substrates. This product offers good release stability, coverage at low silicone coat weights, and fast cure properties, which in turn allow for a low platinum concentration.

VINNAPAS® EP 706K (ULS) is a high-viscosity vinyl acetate-ethylene copolymer dispersion with low formaldehyde and low free VAM residue. It exhibits good machinability and strong wet tack, providing improved adhesion to films like polyvinyl chloride. Additionally, VINNAPAS® EP 706K (ULS) demonstrates very high plasticizer and solvent viscosity thickening responses.

VINNAPAS® EP 706K (NJG) is a high-viscosity vinyl acetate-ethylene copolymer dispersion with low formaldehyde and low free VAM residue. It exhibits good machinability and strong wet tack, offering improved adhesion to films such as polyvinyl chloride. Additionally, VINNAPAS® EP 706K (NJG) demonstrates very high plasticizer and solvent viscosity thickening responses.

VINNAPAS® 323 is a vinyl acetate-ethylene copolymer dispersion stabilized with polyvinyl alcohol and has a glass transition temperature (Tg) of +23 °C. It is specifically developed as a fast-setting and high-heat-resistant dispersion, offering compatibility with fully hydrolyzed PVOH. VINNAPAS® 323 is designed as a base for high-speed packaging applications. It demonstrates excellent wet tack, fast setting properties, and a moderate response to plasticizer thickening.

SILFAR® SE 88 is a silicone antifoam emulsion suitable for various industries such as food, pharmaceuticals, fermentation processes, and agrochemical formulations. It is specifically designed for European use as a processing aid in food production, based on E 900. It is important for the food manufacturer to ensure that only minimal traces of the product are present in the final food, as per the necessary regulations.

DEHESIVE® 910 is a solvent-free, addition-curing silicone fluid designed for release applications on paper and filmic substrates. It is part of a multicomponent release coating used to produce paper and filmic release liners, which are essential for single- and double-sided industrial laminates.

DEHESIVE® 908 is a solventless, addition-curing silicone fluid designed for release applications on both paper and filmic substrates. It is an essential component of a multicomponent release coating used in the manufacturing of paper and filmic release liners. These liners play a crucial role in the production of single- and double-sided industrial laminates.

DEHESIVE® SF 500 is a solvent-free, addition-curing silicone fluid. It is part of a multi-component system. Combined with a crosslinker, platinum catalyst, and others, it is used to apply a release coating on paper and filmic substrates. It is part of a release coating for paper and filmic pressure-sensitive laminates. Examples include uses for single- and double-sided industrial release laminates.

VINNAPAS® 401 is a vinyl acetate-ethylene copolymer dispersion stabilized with polyvinyl alcohol and has a glass transition temperature (Tg) of -15 °C. It is specifically formulated to provide easy clean-up, extended open time, and exceptional film flexibility. VINNAPAS® 401 is commonly used as a base for adhesives, offering a well-rounded combination of excellent wet tack, fast setting, strong adhesion, and heat resistance.

DEHESIVE® 955 is a solvent-based, addition-crosslinkable, two-component silicone system recommended for release coatings. It offers excellent release stability, excellent anchorage to polyester films, and a good bath life. DEHESIVE® 955 can be used for coating PE-laminated paper, polyester films (PET), and papers.

WACKER® Catalyst PT 5 is a specialized platinum catalyst designed for the efficient thermal curing of both solvent-based and solvent-free addition-crosslinking silicones. It is highly active and concentrated, ensuring rapid curing and consistent performance in silicone systems. With its high platinum concentration, this catalyst offers excellent efficiency. Additionally, WACKER® CATALYST OL is miscible with silicones in any proportion, providing versatility and ease of use in various applications.

VINNAPAS® EF 539 is an aqueous dispersion of a vinyl acetate-ethylene (VAE) copolymer. It was specifically formulated as an environmentally friendly binder for intermediate-grade caulk formulations. The manufacturing process excludes the use of alkylphenol ethoxylates (APEOs), ensuring a reduced environmental impact. No formaldehyde or formaldehyde donors are intentionally added to this product. Furthermore, VINNAPAS® EF 539 has a low glass transition temperature (Tg), which contributes to its desirable performance characteristics.

WACKER® Catalyst EM 440 is an emulsion that contains a highly reactive platinum catalyst. This product is specifically designed to be used as a component in release coating formulations for the production of release papers and films. It exhibits high reactivity and superior wetting properties, ensuring good anchorage and shear stability in the application process.

DEHESIVE® 915 is a solvent-free, addition-curing silicone fluid specifically developed to provide paper and filmic substrates with a release layer. Formulated with additional components, this versatile product offers exceptionally fast curing properties, enabling the use of formulations with low platinum concentrations.

LIOSIL® TS 40 E is a microemulsion of a functional silicone fluid specifically developed as a softener for the tissue industry. It offers excellent softness and a very good hydrophilic nature. The product is easily diluted with water and exhibits high substantivity on cellulose fibers. It is a microemulsion.

SILFAR® 1000 is a polydimethylsiloxane produced through the hydrolysis and polycondensation of dichlorodimethylsilane and chlorotrimethylsilane. Its degree of polymerization (n) is adjusted to achieve a mean kinematic viscosity of 1000 mm²/s at 25°C. This versatile product finds application in both the pharmaceutical and food sectors. In the pharmaceutical industry, it is commonly used in antiflatulence and antacid preparations.

VINNAPAS® 400 H is a poly(vinyl alcohol)-stabilized vinyl acetate-ethylene copolymer dispersion with a glass transition temperature (Tg) of 0°C. It was developed as a higher-viscosity, high-performance dispersion offering a superior balance of adhesive and cohesive properties useful in achieving much higher formulation viscosities.

VINNAPAS® EP 701K is a polymer dispersion based on vinyl acetate and ethylene. It offers excellent elongation, water resistance, and flexibility. This dispersion also demonstrates outstanding adhesion to various plastic surfaces, resulting in permanently flexible adhesive joints and high adhesion.

CRA® 51 AMA® is a highly efficient controlled release additive designed to adjust the release force in solventless DEHESIVE® systems. It offers exceptional performance in terms of high efficiency, ensures rapid curing, exhibits stable release characteristics, and includes anti-misting properties.

HDK® H13L is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H13L is primarily used as a thickening, thixotropic, and anti-sedimentation agent in various applications such as coatings, printing inks, adhesives, and others. It finds its main application in polar systems. The strong hydrophobicity of HDK® H13L makes it particularly suitable for solvent-free systems, high solids formulations, and waterborne coatings.

SILFAR® SE 4 is a silicone antifoam emulsion that finds its use in the food and pharmaceutical sectors, as well as in fermentation processes and agrochemical formulations. It serves as an effective antifoam agent in various stages, including fermentation and downstream processes like active ingredient extraction and solvent recovery, where compliance with USP and EP standards is necessary.

PULPSIL® 955 S is a hydrolytically stable silicone surfactant that is water-dispersible and consists of a polyethermodified silicone fluid. It has been specifically designed for use in the pulp and paper industry. This product significantly improves the efficiency of paper deaerators, enhances the drainage and deaeration processes in pulp production, and acts as a booster for pulp defoamers beyond their cloud point.

VINNOL® H 40/43 is a copolymer composed of approximately 66 wt.% vinyl chloride (VC) and approximately 34 wt.% vinyl acetate (VAc). Its primary application is as a binder for surface coating compounds and printing inks. This thermoplastic binder undergoes physical drying, resulting in the formation of a film once the solvent in the formulation has evaporated.

VINNOL® H 40/60 is a copolymer composed of approximately 61 wt.% vinyl chloride (VC) and approximately 39 wt.% vinyl acetate (VAc). Primarily, it serves as a binder for surface coating compounds and printing inks. As a thermoplastic binder, VINNOL® H 40/60 undergoes physical drying, resulting in the formation of a film as the solvent in the formulation evaporates.

CRA® 17 is a highly efficient controlled-release additive designed specifically for adjusting the release force of solvent-free DEHESIVE® systems. It offers exceptional performance in achieving the highest release values among all CRA® modifiers. Its key features include high efficiency, rapid curing, and stable release characteristics.