Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Industrial Additives Functions
- Technologies
Features & Benefits
- Industrial Additives Features
Applications & Uses
- Markets
- Applications
- Application Method
- Industrial Additives End Use
- Applications
Tissue
- Application Details
- The product amount should be tailored to the particular tissue being used. Typically the amount of product applied on the tissue is in the range from 1 and 5 g/m². For the application of LIOSIL® TS 40 E common technologies like roll coating, slot coating, spraying, or rotor damping systems are recommended. Aerosol formation has to be avoided. In case of aerosol formation special protective measures are required.
- The use of the emulsion is recommended for all conventional tissue types such as toilet paper, facial tissue, handkerchiefs or cosmetic wipes, which may benefit from a certain soft feel. The emulsion can be combined with other organic softeners or well-being additives, too, provided an adequate compatibility test has been performed. If substantial foaming occurs during processing, we recommend our SILFOAM® SD 670.
Properties
- Miscible in
- Water
- Typical Properties
- Properties
- Owing to its special structure and orientation on cellulose fibers, LIOSIL® TS 40 E is characterized by an excellent soft hand and an very good hydrophilicity.
- Excellent soft hand combined with very good hydrophilicity
- Very easily dilutable with water
- High substantivity on cellulose fibers
- Microemulsion
| Value | Units | Test Method / Conditions | |
| Chemical Characterization | Polydimethylsiloxane with aminoalkyl groups - (emulsion in water) | — | — |
| Density (at 20°C) | approx. 1 | g/cm³ | DIN 51757 |
| Dynamic Viscosity (at 25°C) | approx. 50 | mPa·s | Brookfield |
| pH | approx. (4 - 6) | — | Indicator strips |
| Solids Content | approx. 25 | % | Microwave oven |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability