Products in Renewable Energy

Ecotechnilin L-FLAXDRY-BL200-30m² is a balanced fabric - 200gr of flax/m².

Mar-Bal MB2000-20 is an excellent flame and track resistant material possessing outstanding electrical and mechanical properties.

Rhino Linings USA, Inc. 1307LV Resin is a Epoxy Resin for Kit Aircraft. Kit Aircraft Laminating and Adhesive System. System has excellent wet out, low viscosity and high strength.

Ecotechnilin L-FLAXDRY-UD150-30m² is a unidirectional fabric- 150gr of flax/m².

KoeppCell® K/PE 45 FR is closed-cell having soft-elastic PE foam. It is chemically crosslinked polyethylene foam.

ArmaPET™ Eco130 is combines insulation and structural integrity, ensuring energy and emission efficiency for decades of use. Energy-efficient composite sandwich structures are a powerful way of saving energy and reducing CO2 emissions. Armacell is following the growing demand for high-performance insulating materials and with ArmaPET Eco it offers a foam core that optimally combines structural performance, versatility, sustainability, and long-term insulating properties.

Toray BT250E-1 resin system is a 121°C (250°F) cure epoxy prepreg system with excellent toughness and strength. It provides an outstanding surface finish under vacuum-bag/oven-cure only. The resin system, which is self-adhesive to honeycomb and foam core, is MIL-R-9300 qualified and makes a great choice for many Applicationss in the low-tomedium-service temperature range.

468G roving is used in filament winding and weaving applications in epoxide resin systems. The direct rovings can be used to manufacture multi-axial fabrics.

CIP Composites CIP121 is a commonly used in general industrial applications, wet or dry, where high shock or edge loading is anticipated. 100% polyester material (textile and resin) with the solid lubricants molybdenum disulfide (MoS2) evenly dispersed throughout the resin system.

VTFA400 (DF034) toughened epoxy adhesive film is design to cure between 65°C and 120°C, allowing flexibility in component manufacture.

ZOLTEK’s PX35 Flake Type chopped fibers provide ready impregnation of thermoset resins, with the capability to mold complex shapes. The resultant carbon fiber/ resin matrix composites offer high strength-to-weight and stiffness-to-weight ratios. Zoltek PX35 Flake Type chopped fibers may also be used as a low-cost alternative in thermoplastic applications, whereby a small portion of the matrix-specific product can be replaced with chopped flake carbon fibers with negligible impact to composite properties.

TG-24-P is a E-Glass Fiber (Originally known as Electical glass). The most economical and commonly used fiber in the reinforced polymer composite industry with variety of sizes (finish) depending on the resin system process application.

Atlantic Metals & Alloys Tellurium is a metalloid used in thermoelectric elements, catalysts, etc.

Grunstoff Kunststoff-Recycling PMMA (Polymethylmethacrylat) exhibit medium stability and high rigidity. Their impact strength is six times that of silicate glass. The surfaces are exceptionally hard and can be polished. In other words, they can be highly scratchproof. Moreover, these plastics are highly translucent, absolutely colorless and luminous.

Soric® LRC 2 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Park’s E-752-MTS is a toughened; 350°F cure epoxy system designed with improved mechanical properties and damage tolerance that is suitable for primary aircraft structures. Consistent with the E-752 family of epoxies, the E-752-MTS allows flexible and robust processing in Autoclave, Out of Autoclave and Press cures. It exhibits improved toughness and impact strength while maintaining good tack and drapeability for ease of layup.

HiMax™ multiaxial reinforcements, or non-crimp fabrics (NCF), are made up of multiple plies of parallel fibers, each lying in a different orientation or axis that allows customers to process multiple layers of unidirectional fibers in a single fabric.

E-3LTI 10800 is a E-Glass fiber type.

G-Etronax® B is the composite material that does it all. G-Etronax® B as an all-in-one material. This is because the carefully composed resins combined with the glass base result not only in exceptional resistance but also amazing electrotechnical properties, making G-Etronax® B suitable for countless applications.

E-QX 4800 is a E-Glass fiber type.

SKAPS MF 180 is a fiberglass of type E-glass. It is compatible with Polyester, Vinyl Ester and Epoxy resins

Norsodyne® G-550Y is general purpose orthophthalic resin for hand lay up and spray up with high strength and it is generally used in automotive, industrial sector, marine applicatons.

Polynt Group BMC RF 10/20 is a bulk molding compound based on an unsaturated polyester resin, fire retardant grade, halogen-free, reinforced with glass fibers. This BMC has been developed for electrical application. Good mechanical properties and good fire protection grade are combined into the BMC RF 10/20. BMC RF 10/20 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

3B Fiberglass SE 2020 consist of conti-nuous filaments bonded into a single strand and wound onto a bobbin shape. A proprietary sizing applied on the fibers assures an excellent resin-to-glass bonding. SE 2020 Direct Rovings made of Advantex® glass are specifically designed for the production of Non Crimped Fabrics. The sizing of SE 2020 Direct Rovings is specifically designed for excellent adhesion with epoxy resin systems. SE 2020 Direct Rovings present high level of fatigue performances, supe-rior interfibre and interlaminar shear strengths. The SE 2020 Roving is approved by Germanischer Lloyd for the use in wind turbine rotor blades. SE 2020 Direct Rovings made of Advantex® glass can also be used in prepreg, filament winding processes.

NORSODYNE® M 28070 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce bmc and smc manufacture,electric parts through hot press molding,injection molding,rtm method.

Incozol 2 acts as an effective moisture scavenger in polyurethane coatings. It is used to eliminate moisture from solvents, polyols and prepolymers and also from plasticisers and pigments. It removes residual moisture from the formulation and prevents bubbling and downglossing caused by high moisture levels either on the substrate or from the atmosphere. Incozol 2 is used in one or two component systems but is not generally recommended in one component systems with a low NCO content.

PEROXAN BIB-40 GS is Di-(2-tert.-butyl-peroxyisopropyl)-benzene 40%, Granules with chalk.PEROXAN BIB-40 GS is used for the crosslinking of natural rubber and synthetic rubber, as well as polyolefins.

This is a family of con�nuous filament reinforcing mats designed for pultrusion processes. They are treated with a suitable bonding resin and coupling agent and have good handling proper�es and good weight uniformity.

Divinycell H provides excellent mechanical properties to low weight. The unique IPN chemical structure, yields impressive mechanical performance to a low weight. Divinycell H has been widely used and has a proven track record in virtually every application area where sandwich composites are employed including the marine (leisure, military and commercial), land transportation, wind energy, civil engineering/infrastructure and general industrial markets. Divinycell H is ideal for applications subject to fatigue, slamming or impact loads. Other key features of Divinycell H include consistent high quality, excellent adhesion/peel strength, excellent chemical resistance, low water absorption and good thermal/acoustic insulation. Divinycell H is compatible with virtually all commonly used resin and manufacturing systems.

ArmaPET™ Struct GR135 is the versatile and durable solution for structural sandwich applications, with a more environmentally responsible approach. Provides a unique combination of material and processing properties, such as durability, elevated service temperature stability and excellent compatibility with most common resins and manufacturing methods.

HiMax™ multiaxial reinforcements, or non-crimp fabrics (NCF), are made up of multiple plies of parallel fibers, each lying in a different orientation or axis that allows customers to process multiple layers of unidirectional fibers in a single fabric.

PEROXAN BIB-40 PK is Di-(2-tert.-butyl-peroxyisopropyl)-benzene 40%, Powder with clay.PEROXAN BIB-40 PK is used for the crosslinking of natural rubber and synthetic rubber, as well as polyolefins.

When high modulus fibers are combined with Innegra IS-625, weight can be reduced impact resistance, damage tolerance and signal transmission vastly improved, expanding the performance of existing materials.

SMCarbon® 90CF60-3K - Sheet molding compound based on epoxy resin and reinforced with carbon fibers designed for compression molding technology. This epoxy based SMC is suitable only for application with thickness of 15 mm at maximum.

Mo-Sci Corporation GL1702 is a glass-ceramic sealing glass is white colored in powder form.

Norsodyne® CMC15100W - orthophthalic resin for marble and onyx, promoted and waxed, low viscosity. Main applications areas are building and construction, industrial sector etc.