Products in Off Road & Commercial Vehicle Coatings: Solventborne Coa...

AFCONA 3031 is a polyether modified polysiloxane slip and leveling additive used primarily in metal and UV coatings. It provides a very good slip performance, which is characterized by an "oily" or "wet look" appearance that can visually enhance film thickness. AFCONA 3031 is used in metal coatings, such as industrial heat-cured systems, car refinish polyurethane clear topcoats, and other vehicle paint.

Domopol 6046 100% is a saturated polyester resin developed for 2K polyurethane coatings. This resin can be used as such or combined with hydroxy acrylic resins to increase solids content in industrial finishes, protective coatings and plastics coatings.Features & BenefitsSolvent-freeCombination resin for hydroxyl acrylic resinsHigh glossUV light and heat resistance and weathering resistance

Domalkyd 1351 75 BAc is a short oil alkyd resin modified with soybean fatty acids developed for low yellowing solvent borne coatings.Features & BenefitsLow yellowing solvent borne coatingsHigh solid resin

Domopol 6115 is a solvent-free polyester and polyether polyol developed for use in the formulation of 2K coatings. With this resin the coatings are tough and flexible, hard-wearing and chemically resistant.Features & BenefitsSolvent-free2K coatingsHard-wearing and chemically resistant coatings

TexMATTE 6005 is a cross-linked polymethyl methacrylate product.

S-375 is a synthetic wax with a DSC peak melt around 100°C and the corresponding low onset of melting. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

S-400-Q is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 108 – 146°C. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

NonSKID 8001 is a combination of micronized polypropylene and PTFE. Shamrock’s NonSKID micropowders provide resistance to sliding forces.

S-379-H is a synthetic wax with a DSC peak melt around 100°C and corresponding low onset of melting. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

S-483 is a spherical synthetic wax with a DSC melt peak above 110°C. It has good onset of melting and low crystallinity. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

SST®-2 is a white low MW PTFE micropowder with particle size distribution at a mean value of 8 µm. SST®-2 products are Shamrock’s PTFE micropowders that are defined by particle size and distribution, molecular weight, crystallinity, surface area, oil adsorption, powder flow, and color. Made primarily from highly controlled recycled PTFE feedstocks, SST® products are used for their ability to produce slip, nonstick, water repellency, texture, release, rub, and abrasion resistance to surfaces.

S-395-SP5 is a synthetic wax with a DSC melt peak above 120°C, good crystallinity, and the high onset of melt. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

CeraSPERSE 31 is carnauba wax compounded in Butyl Carbitol (Diethylene glycol monobutyl ether). This slow-evaporating, hydrophilic glycol ether provides compatibility with both polar and non-polar systems. Shamrock’s CeraSPERSE products are manufactured using a controlled crystallization process that allows the production of 1 micron wax dispersions. These wax compounds have a translucent appearance with a shiny gloss and a creamy feel. In addition to our standard products, Shamrock can develop and produce a wide range of compounds on a make-to-order basis.

S-395-N2 is a synthetic wax with a DSC melt peak above 120°C, good crystallinity and high onset of melt. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

S-NAUBA 5021 is a concentrated blend of carnauba and synthetic wax showing melting peaks ranging from 84 – 110°C. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

S-395-N5 is a synthetic wax with a DSC melt peak above 120°C, good crystallinity and high onset of melt. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

High brightness, work-horse calcined kaolin clay, extremely low crystalline silica content.

S-363 is a synthetic wax alloy showing melting peaks ranging from 92 – 141°C. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

S-400-N5 is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 99 – 147°C. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

FluoroSLIP® 225 is a blend of low molecular weight synthetic wax and PTFE.

S-394-N1 is a synthetic wax with a DSC melt peak above 110°C and good onset of melting. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes

NEVCHEM®250 is a thermoplastic low molecular weight, C9 hydrocarbon resin produced by catalytic polymerization of mixed aromatic monomers derived from petroleum feedstocks.

An ultra high-strength daylight fluorescent pigment for thinfilm solvent-based applications such as gravure and screen process inks. A dyed/pigmented melamine, sulphonamide, formaldehyde thermoset copolymer.

NEVCHEM® 220 is a thermoplastic low molecular weight, C9 hydrocarbon resin produced by catalytic polymerization of mixed aromatic and alicyclic monomers derived from petroleum feedstocks.

Slip additive for water-based coating systems. SCHWEGO mar 8305 is suitable for water borne systems such as: air drying alkyd resins, alkyd/melamine combinations, self and foreign crosslinking polyacrylic resins, polyurethanes, nitrocellulose systems, acid curing melamine and urea systems, oil-free polyesters.

T Comet Blue 60 is a daylight fluorescent pigment for inks, paints, aerosols, plastisols and organosol coatings.

At 100% active with a well-balanced surface-active capability, Teraflow® 1000 provides smoother films, allowing the application of thinner coatings, and contributes to substrate wetting, improvement of gloss, and recoat adhesion. Its novel pigment-affinic functionality, allows the formulator to optimize the dispersion of almost all pigments and extenders. It is soluble in ketones such as MEK and MIBK.

A daylight fluorescent pigment for inks, paints, aerosols, plastisols and organosol coatings. A dyed/pigmented melamine, sulphonamide, formaldehyde thermoset copolymer.

An ultra high-strength daylight fluorescent pigment for thinfilm solvent-based applications such as gravure and screen process inks. A dyed/pigmented melamine, sulphonamide, formaldehyde thermoset copolymer.

CHS-EPOXY 171 is a Low molecular weight "1,5 - type" epoxy resin.

A daylight fluorescent pigment for inks, paints, aerosols, plastisols and organosol coatings. A dyed/pigmented melamine, sulphonamide, formaldehyde thermoset copolymer.

T UV Blue 70 is a daylight fluorescent pigment for inks, paints, aerosols, plastisols and organosol coatings.

T Cerise 13 is a daylight fluorescent pigment for inks, paints, aerosols, plastisols and organosol coatings.

An ultra high-strength daylight fluorescent pigment for thinfilm solvent-based applications such as gravure and screen process inks. A dyed/pigmented melamine, sulphonamide, formaldehyde thermoset copolymer.

NEVCHEM®240 is a thermoplastic low molecular weight, C9 hydrocarbon resin produced by catalytic polymerization of mixed aromatic monomers derived from petroleum feedstocks.

NEVCHEM®200 is a thermoplastic low molecular weight, C9 hydrocarbon resin produced by catalytic polymerization of mixed aromatic monomers derived from petroleum feedstocks.