Paints & Coatings

The Mitsubishi Chemical Group

jER™ YX7105

jER™ YX7105 is a liquid-type epoxy resin with toughness, flexibility, and high stretchability. It is used as an impact modifier for semiconductor, printed electronics and wearable devices to avoid bending and warpage. jER™ YX7105 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol.FeaturesExcellent adhesionGood toughnessGood mechanical, impact and crack resistanceExcellent elasticity and flexibilityApplicationsPrinted electronics (resist ink, build-up wire board, flexible printed wire board, metal core printed circuit board)Semiconductor manufacturing (liquid mold compound, underfill, sidefill, diebonding, ACF, NCF, ACP, NCP)Base film and sheet for wearable devicesCoatingsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

jER™ YX8000D

jER™ YX8000D is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparencyLED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

INVISTA

Dytek® BHMT

DYTEK® BHMT (bis-hexamethylene triamine) is a long chain triamine that is used as a binder in asphalt, as a phosphonate scavenger and flocculant in oil & gas applications, and as a hardener in epoxy coating and adhesive applications.

The Mitsubishi Chemical Group

jER™ 4250

jER™ 4250 is a hybrid bisphenol A/bisphenol F-type epoxy resin that is more flexible than conventional polymer-type epoxy resins. It can be used as an additive to add toughness, insulating and vapor barrier properties and resistance to heat, water and chemicals to a variety of applications. FeaturesPolymer-type epoxy resin with epoxy functional groups at the both endsHigh molecular weightHigh softening points Good adhesionApplicationsPCM, CAN and other coatingsPaintThermoplastics Printed electronics Plastic processing *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

jER™ YL980

jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). Benefits Excellent adhesiveness Maintains high electrical reliability Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Applications Electrical and electronic applications Potting & encapsulation materials Adhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

jER™ Epoxy YX7110

jER™ YX7110 is a tough and flexible liquid-type epoxy resin. It can be used as an impact modifier for brittle materials, as an additive to increase impact resistance, and for stress relaxation to avoid cracking and warpage. jER™ YX7110 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol. Features Adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol Crack and impact resistance Excellent flexibility and elasticity High viscosity Low warpage Maintains flexibility even after full-curing Applications Coatings Adhesives Composites Potting and encapsulation materials Base film/sheet for wearable devices *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

jER™ YX4000

jER™ YX4000 is a biphenol-type solid epoxy resin with significantly low melt viscosity, low water absorption and a good balance between adhesiveness and rigidity against stress. It can be used for electrical and electronic applications. jERTM YX4000 is an adduct formed from the reaction of epichlorohydrin and tetramethylbiphenol FeaturesAbrasion, heat and water resistanceElectrical insulationWear resistanceProduct HighlightsSignificantly low melt viscosity (melting point: 108°C)Low chroline contentLow water absorption ApplicationsElectrical and electronic applications (EMC, solder resist, PCB)Potting and encapsulation materialsPowder coatings for ship bottomsAdhesivesComposites *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

jER™ YX8040

jER™ YX8040 is a hydrogenated bisphenol A-type solid epoxy resin, with high molecular weight. It can be used for optical materials such as LED encapsulants and adhesives for displays.FeaturesHigh purityTransparencyLED-curableUV-curable *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

allnex

SETAQUA® 6756

SETAQUA 6756 is a self-crosslinking, surfactant free acrylic copolymer emulsion that offers excellent hardness, fast drying and good sandability. The product is highly durable and has exceptional chemical resistance. Film properties of SETAQUA 6756 are further enhanced by the resin’s fine particle size. This serves two functions: 1) it maximizes film clarity and 2) improves film formation for better chemical and solvent resistance. SETAQUA 6756 has excellent flow and leveling properties, approaching a solvent borne product

allnex

SETALUX® 1385 BX-51

SETALUX® 1385 BX-51 is a thermosetting hydroxylated acrylic copolymer. Good compatibility with cellulose aceto-butyrate resins.

allnex

SETAQUA® 6716

Setaqua 6716 is a self-crosslinking, surfactant-free acrylic dispersion that offers excellent hardness, fast drying, good sandability and exceptional chemical resistance. Due to its small particle size, varnishes based n Setaqua 6716 have good in-can stability and dry-film clarity.

INVISTA

Dytek® BHMT-HP

DYTEK® BHMT HP (bis-hexamethylene triamine) is a high purity (>95%) triamine that is used in applications where purity is critical such as phosphonate scavenger and flocculant in oil & gas applications and as a hardener in epoxy coating and adhesive applications.

The Mitsubishi Chemical Group

jER™ 1256

jER™ 1256 is a solid epoxy resin produced from Bisphenol A epoxy resin. It is a polymer-type epoxy resin with epoxy functional group at the both ends. It can be used to add toughness, insulating and vapor barrier properties, and resistance to heat, water and chemicals in a variety of applications. FeaturesHigh molecular weightHigh softening pointsGood film formerHydrolysis resistanceFlexibilityStrong adhesionApplicationsPCM, CAN, and other coatingsPaintsFiber-reinforced materialsThermoplasticsPrinted electronicsPlastic processing *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

jER™ YX7400N

jER™ YX7400N is an adduct formed from the reaction of epichlorohydrin and an aliphatic polyol.FeaturesAdduct formed from the reaction of epichlorohydrin and an aliphatic polyolExcellent elasticityImpact resistanceApplicationsConsumer appliances and electronicsElectrical devices, assemblies, parts and componentsElectronics adhesivesElectrical and electronic packaging and assemblySpecialty and conformal coatingsPotting compoundsPrinted circuit boards (PCBs)Semiconductor manufacturing*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

jER™ YL983U

jER™ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). BenefitsExcellent adhesivenessGood elastic recovery FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)Low viscosityApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

allnex

EBECRYL® LED 02

EBECRYL® LED 02, a mercapto modified polyester acrylate resin, can be added as a co-resin to UV curable formulations. EBECRYL® LED 02 transforms formulations into UV LED, UVA, or low energy curable systems by providing better surface cure. In addition, this co-resin can also be used to obtain better surface cure in high energy cure formulations. EBECRYL® LED 02 provides better surface cure by mitigating oxygen inhibition of the free radical process.

allnex

PHENODUR® PR 612/80B

PHENODUR® PR 612/80B is a curable phenolic resin. It is used in heat-curable phenolic/epoxide resin combinations, high-adhesion, chemically resistant protective coatings for apparatus, vessels and pipelines. PHENODUR® PR 612 also for wire insulation varnishes.

allnex

EBECRYL® 8402

EBECRYL® 8402 is a low viscosity aliphatic urethane diacrylate. Films cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, toughness and excellent exterior durability. Low viscosity coatings or enhanced performance via increased oligomer content are possible. It is recommended for use in: coatings for wood, coatings for plastics, flexographic inks, screen inks, and exterior durable coatings.

allnex

SETALUX® 1184 SS-51

SETALUX® 1184 SS-51 is an acrylic polyol with 2.0 % OH (calculated on non-volatiles). Excellent fast drying, very good through hardening, good stackability, long potlife, good chemical resistance, excellent mar and stain resistance, good light fastness, good compatibility with poly-isocyanates.

allnex

DAOTAN® TW 6450/30WA

DAOTAN® TW 6450/30WA is a polycarbonate based aqueous aliphatic polyurethane dispersion. It is recommended as the NMP / NEP- free alternative for Daotan™ (V)TW 1236. When dried at ambient temperatures, it creates clear, crack- free films without further addition of organic solvents or additives. These films exhibit excellent elasticity and mechanical properties as well as very good adhesion to different plastic substrates

Kuraray

Kuraray Poval™ 4-98

KURARAY POVAL™ 4-98 (formerly Mowiol® 4-98) by Kuraray is a fully saponified polyvinyl alcohol having varying degree of polymerization and hydrolysis. It is an odorless, water-soluble polymer manufactured by alcoholysis of polyvinyl acetate. It possesses good penetration capacity and good adhesion properties. It provides high cohesion, toughness, low electrostatic charging and re-dissolving capacity of the dried film in water. Its aqueous solution can be added to polymer emulsions already stabilized with polyvinyl alcohol which affects the extension of the open time, setting speed and rheology. KURARAY POVAL™ 4-98 is designed for use in pressure sensitive adhesive labels. Complies with EU Directive 67/548/EC.

Jubail Chemical Industries

Araldite® GZ7071X75

Araldite® GZ7071X75 is a typical type 1 epoxy resin based on Bisphenol A as solvent cut 75% in Xylene. The resin is similar to solid resin Araldite® GT 7071.

Georgia-Pacific Chemicals

GP BKS-2600

GP® BKS-2600 heat-reactive phenolic resin solution in ethanol is formulated to provide chemical resistance for protective coatings for rigid metallic substrates.

allnex

SETAQUA® B E 270

SETAQUA® B E 270 is water thinkable, oil-free, polyester resin. In combination with water-thinkable amino resins in the formulation of industrial stoving coatings and aqueous stoving primer surfacers for online automotive finishing, both with low co-solvent content.

allnex

SETAQUA® 37-6517

SETAQUA® 37-6517 (formerly SETAQUA® 6517) is an acrylic polyol emulsion suitable for high durable, abrasion- and chemical resistant two-component waterborne PUR paint systems.

allnex

SETALUX® 1152 SS-60

SETALUX® 1152 SS-60 is an acrylic polyol with 4.2 % OH (calculated on non-volatiles). SETALUX® 1152 SS-60 is easy in application, even under conditions of high humidity and low temperatures. SETALUX® 1152 SS-60 is capable of high build with practically no yellowing under UV light, has excellent exterior durability, good mechanical properties and chemical resistance.

Kuraray

Kuraray Poval™ 10-98

KURARAY POVAL™ 10-98 (formerly Mowiol® 10-98) by Kuraray is a fully saponified, odorless, water-soluble polyvinyl alcohol manufactured by alcoholysis of polyvinyl acetate. Shows varying degree of polymerization and hydrolysis. Its aqueous solution can be added to polymer emulsions already stabilized with polyvinyl alcohol which affects the extension of the open time, setting speed and rheology. Exhibits good penetration capacity and good adhesion properties. Offers high cohesion & toughness, low electrostatic charging and re-dissolving capacity of the dried film in water. KURARAY POVAL™ 10-98 is suitable for use in pressure sensitive adhesive labels. Complies with EU Directive 67/548/EC.

Georgia-Pacific Chemicals

GP CK-2400

GP® CK-2400 coating resin is a novolac resin modifier for alkyd and epoxy air dry coatings designed to improve water resistance, hardness, leveling, gloss and intercoat adhesion.

allnex

SETALUX® D A 450 BA/X

SETALUX D A 450 BA/X is a hydroxyl-functional acrylic polyol that is used in the formulation of very fast-drying two component polyurethane coating systems. When SETALUX D A 450 BA/X is used with aliphatic/aromatic polyisocyanates based on toluene diisocyanate and hexamethylene diisocyanate, two-component filler coats and topcoats for wood are possible that can be sanded very early and stacked after a short time.

allnex

EBECRYL® 8210

EBECRYL® 8210 is an aliphatic urethane acrylate that exhibits low viscosity and high reactivity in ultraviolet (UV) light or electron beam (EB) curable coatings. Cured films of EBECRYL® 8210 demonstrate high hardness with good scratch, abrasion and chemical resistance. EBECRYL® 8210 is recommended for: coatings requiring high scratch/abrasion resistance and improved adhesion, a modifying oligomer to increase cure speed, solvent resistance and abrasion resistance, and dual cure coating systems.

allnex

BECKOCOAT® PU 428/51XMPAC

BECKOCOAT® PU 428/51XMPAC is a light stabilized, oil-free, moisture curing one-component polyurethane resin. It's used in floor sealers, wood coating, concrete impregnation, and as crosslinkers for alkyd resins in two-component systems.

allnex

ADDITOL® LED 01

ADDITOL® LED 01 is a mercapto modified polyester acrylate resin. It is added as co-resin to UV curable formulations, in order to transform them into UV LED curable systems. It is used as co-resin, in order to increase the surface cure of a formulation when cured with an UV LED lamp.

GSI Exim America

NIPPOLLAN N-963

NIPPOLLAN N-963 is newly developed polycarbonate diol (PCD) with added flexibility to the initial versions of NPU’s PCD (NIPPOLLAN 980, 981) products. NPU’s initial PCD products possessed high durability and stiffness due to its straight aliphatic carbonate chain structure, and have been widely applied in synthetic leather and various other applications. However, the lack of flexibility was one of its disadvantages. Therefore, a new series of PCD were developed which possessed the same durability but also with added flexibility property.

Argon Kimya

ARAKRIL ADC 750

Hard, hydrophobic copolymer for roof coatings, moisture barrier coatings,exterior insulation and finishing systems (EIFS),crack fillers & caulks

allnex

SETAQUA® 6754

SETAQUA® 6754 is An acrylic copolymer dispersion. SETAQUA® 6754 is a very hard self-crosslinking acrylic copolymer dispersion intended for industrial chemical resistant airor force-dry coatings. Pigmented or clear coatings can be formulated with SETAQUA® 6754 which exhibit good hardness, gloss, chemical and blocking resistance.

allnex

UCECOAT® 7510

UCECOAT® 7510 is a Sn-free, VOC free, aliphatic polyurethane acrylate dispersion. It is a robust and versatile resin ideally suited for energy curable industrial coatings applied by spray, curtain or roller coating. UCECOAT® 7510 can be used as the sole formulation resin or in combination with other water-borne resins.