Products in Industrial Coatings: Blends & Combinations

Polysilk® 14 is a complex formulated wax composite that provides a high degree of surface slip, scratch and rub resistance with gloss retention and a silky smooth feel.Features and Benefits Provides a high level of scratch and rub resistance Improves tape release, block resistance, and heat resistance Adds surface slip to impart a silky smooth feel Maximum lubricity achieved after 12 to 24 hours Useful for adding abrasion and antiblock properties to lamination inks at a 0.25-0.5% level

Synslip 3780 is an economical combination of high molecular weight Fischer-Tropsch wax and amide wax that provides scratch resistance, anti-blocking and surface lubricity.Features and Benefits Fischer-Tropsch wax provides slip, scratch and rub resistance EBS provides maximum surface lubricity and blocking resistance without the use of PTFE Imparts a smooth surface "feel" Higher molecular weight vs. Synslip 3750

Polyfluo® 523AL ia A highly engineered HDPE/PTFE/alumina nanocomposite for unsurpassed scratch and scuff resistance.Features and Benefits Maximum scratch and scuff resistance with slip and lubricity HDPE/PTFE composite reinforced with 300 nm aluminum oxide nanoparticles (Mohs Hardness 9) Easier-to-disperse nanotechnology in a safe, non- nano powder Composite particle density maximizes efficiency and minimizes settling Extra fine particle size provides excellent gloss retention and film clarity Composite wax/alumina particle is less abrasive on processing equipment compared to free alumina

Synfluo 168XF is an economical combination of micronized Fischer-Tropsch wax and PTFE for surface lubricity and scratch resistance.

Superslip™ 6515AL is a highly engineered HDPE/amide wax/alumina nanocomposite for maximum scratch, scuff and block resistance.Features and Benefits Maximum scratch resistance; equal to PE/PTFE additives HDPE/amide wax composite reinforced with 300 nm aluminum oxide nanoparticles (Mohs Hardness 9) Good abrasion resistance with slip and lubricity Amide wax component provides excellent antiblocking and release properties Ideal for can and container coatings; 21CFR 175.300 approved Compare to Superslip 6515XF

Polyfluo® 540XF is a wax/ PTFE combination for surface lubricity with scratch and abrasion resistance.Features and Benefits High performance product for adding slip and abrasion resistance Synergistic wax combination that enhances PTFE mobility to the coating surface PTFE dramatically enhances abrasion resistance Wax component provides improved surface slip Easy to disperse fine powder that can be incorporated with high speed mixing

Polyfluo® 535XF is An economical wax/PTFE combination for surface lubricity with scratch and abrasion resistance.Features and Benefits High performance product for adding slip, scratch and abrasion resistance Synergistic wax combination that enhances PTFE mobility to the coating surface PTFE dramatically enhances abrasion resistance Wax component provides improved surface slip Easy to disperse fine powder that can be incorporated with high speed mixing

Polyblend 200 are Unique blends of polyethylene and PTFE that provide scratch and abrasion resistance with surface lubricity and anti-blocking.Features and Benefits High density polyethylene provides excellent abrasion resistance and surface hardness PTFE adds slip, lubricity and antiblocking Good heat and solvent resistance Easy to disperse fine powder that can be incorporated with high speed mixing

Polyblend 100XF are Unique blends of polyethylene and PTFE that provide scratch and abrasion resistance with surface lubricity and anti-blocking.Features and Benefits High density polyethylene provides excellent abrasion resistance and surface hardness PTFE adds slip, lubricity and antiblocking Good heat and solvent resistance Easy to disperse fine powder that can be incorporated with high speed mixing

Propylfluo 824 is a complex modified blend of polypropylene and PTFE that provides gloss control with slip and lubricity.Features and Benefits Polypropylene provides efficient gloss reduction and block resistance PTFE adds slip and lubricity Easy to disperse fine powder that can be incorporated with high speed mixing

Polyfluo® 535 is An economical wax/PTFE combination for surface lubricity with scratch and abrasion resistance.Features and Benefits High performance product for adding slip, scratch and abrasion resistance Synergistic wax combination that enhances PTFE mobility to the coating surface PTFE dramatically enhances abrasion resistance Wax component provides improved surface slip Easy to disperse fine powder that can be incorporated with high speed mixing

Polyfluo® 540 is a wax/ PTFE combination for surface lubricity with scratch and abrasion resistance.Features and Benefits High performance product for adding slip and abrasion resistance Synergistic wax combination that enhances PTFE mobility to the coating surface PTFE dramatically enhances abrasion resistance Wax component provides improved surface slip Easy to disperse fine powder that can be incorporated with high speed mixing

PropylMatte 31SA is Finely micronized PTFE modified polypropylene for consistent matting and gloss control with surface slip, abrasion and burnish resistance.Features and Benefits Efficient gloss reduction from satin to matte finish Polypropylene improves burnish resistance vs. inorganic flattening agents PTFE provides additional abrasion resistance, enhanced lubricity and surface slip Density optimized for maximum stability in water based and energy curable systems Adds texture in low bake (Low E) powder coatings

Synslip 3750 is a combination of Fischer-Tropsch wax and amide wax that provides scratch resistance, anti-blocking and surface lubricity.Features and Benefits Fischer-Tropsch wax provides slip, scratch and rub resistance EBS provides maximum surface lubricity and blocking resistance without the use of PTFE Imparts a smooth surface "feel"

Alfast® Black SW-5804 (Mixture) is a water soluble dye in Orient’s Alfast Color Series.It is suitable for the coloring of anodized aluminum used in fixtures, cameras, precision instruments, and other products.

Oil Green 502 (Mixture) is a dye in Orient Corporation’s Oil Color Series. These dyestuffs are highly soluble in various solvents, particularly non-polar, aromatics solvents.They are suitable for the coloring of resins, oil and fat products, inkjet and writing inks, candles, petroleum products, paints, and plastics.

Alfast® Black SW-5840 (Mixture) is a water soluble dye in Orient’s Alfast Color Series.It is suitable for the coloring of anodized aluminum used in fixtures, cameras, precision instruments, and other products.

Oil Brown 416 (Mixture) is a dye in Orient Corporation’s Oil Color Series. These dyestuffs are highly soluble in various solvents, particularly non-polar, aromatics solvents. They are suitable for the coloring of resins, oil and fat products, inkjet and writing inks, candles, petroleum products, paints, and plastics.

OMNISTAB® UV 1130 acts as a UV absorber belonging to hydroxyphenyl benzotriazole class which imparts good light stability to a variety of polymers. It is a pumpable liquid useful in a variety of substrates and applications.

PolyGlide® 1226XF is a highly engineered HDPE/ceramic/nanoceramic composite for abrasion resistance and lubricity.Features and Benefits HDPE composite reinforced with hard, inert ceramic microspheres and nanoceramic platelets Improved Taber abrasion resistance when compared to PE/PTFE additives Provides slip and lubricity Ideal for can and container coatings; 21CFR 175.300 approved Effective replacement for PTFE additives Compare to (coarser) Polyfluo 900

Jalpon™ 1700HF is a concentrated, highly thixotropic gelled sulfonate in mineral spirits. It is designed to allow the easy formulation of solvent-based industrial coatings with a wide variety of raw materials. Jalpon™ 1700HF will offer superior corrosion protection and resistance to dripping, sag, and unwanted flow in finished coatings. Jalpon™ 1700HF is highly concentrated and should be formulated by blending with a variety of film formers such as oils, waxes, resins, and/or petrolatum products. Jalpon™ 1700HF can be used as an additive to improve rheological characteristics in paints, rust preventives, and coatings. Jalpon™ 1700HF also aids in the dispersion of pigments in highly formulated coatings.

Polysilk® 600 is a formulated wax composite that provides surface slip with scratch and rub resistance, as well as a smooth surface feel.Features and Benefits Provides a high level of scratch and rub resistance Improves tape release, block resistance, and heat resistance Adds surface slip to impart a silky smooth feel Maximum lubricity achieved after 12 to 24 hours Easy to disperse fine powder that can be incorporated with high speed mixing

Jalpon™ 1760HF is concentrated, thixotropic gelled sulfonates in mineral spirit carriers. Their high solids content allows for easy formulation of reduced VOC solvent-based industrial coatings. Jalpon™ 1760HF are compatible with a wide variety of raw materials and will offer superior corrosion protection and resistance to dripping and flow in finished coatings. Jalpon™ 1760HF should be further formulated by blending with other film formers such as oils, waxes or petrolatum to insure a continuous film and optimum performance. In addition to corrosion protection, they impart good rheology characteristics to paints, rust preventives, and coatings. Jalpon™ 1760HF can also be of value in the dispersion of pigments in highly formulated coatings.

Jalpon™ 1760LF is concentrated, thixotropic gelled sulfonates in mineral spirit carriers. Their high solids content allows for easy formulation of reduced VOC solvent-based industrial coatings. Jalpon™ 1760LF is compatible with a wide variety of raw materials and will offer superior corrosion protection and resistance to dripping and flow in finished coatings. Jalpon™ 1760LF should be further formulated by blending with other film formers such as oils, waxes or petrolatum to insure a continuous film and optimum performance. In addition to corrosion protection, they impart good rheology characteristics to paints, rust preventives, and coatings. Jalpon™ 1760LF can also be of value in the dispersion of pigments in highly formulated coatings.

Jalpon™ 5312 is a high solids, lower VOC rust preventive concentrate comprised of gelled calcium sulfonate, oxidate, waxes and other ingredients which yields a relatively dripless, long term waxy rust preventive coating.

Jalpon™ 1500A is a rust preventive base compound that is comprised primarily of gelled calcium sulfonate and a proprietary wax blend. The combination of high non-volatiles and moderately high viscosity will produce firm and waxy films that performs well under severe conditions, particularly salt environments. This product can be used “as is”, further diluted or formulated, using a variety of compatible coating components.

Michem® Lube 182 - A wax emulsion provides slip, release, and anti-block properties in wood coatings and other applications and may be blended with synthetic and natural lattices. It also provides mar and scratch resistance and water repellency in varnishes and other coatings.

AGITAN 260 is a highly effective defoamer for aqueous emulsion based systems and water reducible systems. Due to its low emulsifiability in water the defoamer is ideal for medium to high viscosity formulations. In low viscosity systems AGITAN 260 is recommended if high levels of wetting agents are present or high shear is applied which assists the incorporation of the defoamer.

ADDAPT® Anticor L 4783 is a water-soluble multi-metal anti-corrosion additive. It is a proprietary blend of PolyHydroxycarbonate and Silanes. All constituents comply with the FDA regulation.

DEE FO® PI-320 is a 3-Dimensional Siloxane compound defoamer designed for aqueous printing inks.Applications in Corrugated printing inks, Flexible packaging inks, Film and foil printing inks, OPVs and clear coatings, Wood coatings and top coats, Industrial spray coatings, Direct-to-metal applications and High gloss architectural coatings

AGITAN 155 is a polysiloxane emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN 155 is resistant to alkaline environment. It can be used between pH 6 and 11.

AGITAN 218 is a defoamer for all common emulsion systems.

AGITAN 731 is a highly effective siloxane defoamer for aqueous emulsion and water reducible systems. It is particularly effective in aqueous printing inks. A non-ionic structure provides excellent compatibility with most common binders.

ADDAPT® Anticor AMC 2330 is an emulsifyable anti-corrosion additive for aqueous systems. It protects Aluminum as well as Magnesium and/or combinations thereof. It is a proprietary blend Phosphonates and Glycolethers All constituents are EINECS registered and comply with the FDA regulation.

Brufablend® E 27271 is an organic or inorganic mixed dry pigment blend based on bismuth vanadate. Brufablend E 27271 is a general purpose type, suitable for indoor and outdoor use and most industrial applications.

AGITAN 701 is particularly well suited for water reducible systems. It is also recommended for aqueous emulsion systems, architectural coatings, emulsion plasters, building materials, industrial and wood coatings, printing inks and adhesives.