Products in Industrial Maintenance

GP® CL-7004 phenolic resin from Georgia-Pacific Chemicals is a thermoplastic novolac. It is used as a crosslinking resin for epoxy and polyester resins. Its low phenol content, convenient softening point, and melt viscosity are conducive for use in powder coatings.

NACORR® 1352 is a liquid corrosion inhibitor based on the calcium salt of an aromatic sulfonic acid. It is compatible with waterborne and solventborne systems and offers an excellent balance of compatibility and performance.

NACORR® 1351 is a liquid corrosion inhibitor based on the calcium salt of an aromatic sulfonic acid. NACORR® 1351 promotes pigment dispersion when a small amount is used in the grind, thereby reducing grind time, increasing pigment loading, and improving color strength. It improves gloss properties when used as a dispersant in the grind.

POLYCHEM® 7775-EB-70 is a HAP's free water reducible chain-stopped alkyd. 7775 exhibits excellent corrosion resistance and QUV retention. In addition, it provides good early water resistance. It is ideal for industrial finishes, including air dry and force dry applications, fast dry enamels, and primer applications.

DISPARLON® L-1983N is a silicone-free acrylic polymer surface control additive for leveling properties in low polarity systems such as epoxy primers and epoxy/acrylic UV cure inks.

Jalpon™ 5312 is a high solids, lower VOC rust preventive concentrate comprised of gelled calcium sulfonate, oxidate, waxes and other ingredients which yields a relatively dripless, long term waxy rust preventive coating.

K-POL® 8211 is a unique, aliphatic diol recommended for 2K PU general purpose coatings and elastomers. It provides chemical and stain resistant, scratch resistances and hard films with good flexibility.

LAVIOSA VISCOGEL™ ED2 is a newhigh performing, highly effective rheological additive for solvent-borne systems of moderate to high polarity. that provides thixotropic effect, sag control, excellent leveling and prevents pigments from long-term storage settling. The nature of LAVIOSA VISCOGEL™ ED2 is a highly purified bentonite clay, organically modified with a quaternary alkylammonium compound. Unlike most of the other conventional organoclays, LAVIOSA VISCOGEL™ ED2 is selfactivating and easily dispersible, hence simple and convenient to use.

LAVIOSA VISCOGEL™ S8 is a new high effective high performing rheological additive for solvent-borne systems of low to medium polarity, that gives excellent thixotropic effect, sag control, film thicknesses, leveling and prevents pigments from long-term storage settling. The nature of LAVIOSA VISCOGEL™ S8 is a high purified bentonite clay, organically modified with a quaternary alkylammonium compound.

LAVIOSA VISCOGEL™ S7 is a new high performing, highly effective rheological additive for solvent-borne systems of medium to high polarity. In a typical coating system (paints and printing inks), LAVIOSA VISCOGEL™ S7 gives thixotropic effect, sag control, excellent leveling and prevents pigments from long-term storage settling. The nature of LAVIOSA VISCOGEL™ S7 is a highly purified bentonite clay, organically modified with a quaternary alkylammonium compound.

Benda-Lutz Leafing 1241 exhibits high surface tension due to which the pigment migrates towards the surface of paint film. This enrichment at the boundary protects the paint film from weathering, radiation and corrosion. Provides a strong reflective metal layer at the paint surface giving high metallic brilliance and gloss. Preferred applications include corrosion protection, reflective, maintenance, marine, roof, high heat resistance, chrome effect, and aerosol paints and coatings.

Serkyd FA30TX60ST is styrene modified, special fatty acid based, short oil alkyd resin.

Dynoadd® F-1 Anti-crater and flow additive Contact Dynea: Dynoadd@dynea.com 09.02.2017 Excellent flow and leveling Improves substrate wetting Eliminates craters and pinholes Eliminates overspray cratering Non-silicone.

Vibfast Red 4036 is a Organic Pigment.

Vibfast Red 4026: 1 is a Organic Pigment.

Prasad International Pigment Yellow 65 is recommended for general industrial paints.

Solvent-free chip dispersions for use in solvent borne and radiation cured coatings and inks. PanTINT 12 Colorants are based on a unique modified thermoplastic acrylic resin with exceptionally broad compatibility. Pigments used in the PanTINT 12 Series have been selected to meet the durability and transparency requirements of most high performance applications.

High strength 100% solid colorants with broad compatibility in a wide variety of conventional, low and zero VOC water based coatings and inks. Pigments used in PanTINT 18 Series have been selected to meet the durability and transparency requirements of most high performance applications.

VOXCO CHROME YELLOW VUAH-350 is suitable for use in Alkyd / Stoving, Industrial, Automotive /Refinish / Road Marking, Powder Coating

Polyisocyanate-curing high-solid Acrylic resin

Admark Polycoats AP 8016 is a reactive diluent as a viscosity reducer and flexibelizer. its used in Marine, protective, and industrial coatings that require increased flexibility. Also, can be used in structural adhesive applications.

EPOXOL® CA118 allows the formulation of architectural coatings with good block properties and scrub resistance.The high partitioning coefficient minimizes dirt pick up and aids in low humidity coalescence. Compatibility with ester alcohols and glycol ethers allows use of this product in architectural, industrial, maintenance and wood coatings. The high bio-derived content makes EPOXOL® CA118 an excellent choice for renewable formulations. The product may also be used in place of benzoate, phthalate and citrate ester plasticizers in coatings, sealants, adhesives, and caulk formulations.

Admark Polycoats AP 5050 is a low viscosity, high gloss, very good flexibility, hardness and impact resistance comparable to polyamide. No induction time is required. its used in protective coating, industrial coatings and concrete primer.

Ply-Guard AS (Ultra Flex) is a new-generation, high-gloss, fast curing, two-component aliphatic polyaspartic polyurea topcoat that provides superior flexibility in addition to superior color and gloss retention.

NOVALKYD L1275-66WS, thanks to the selection of the raw-materials, offers an excellent exterior durability also in marine environment. It is particularly suitable for brush flatting varnishes for boat and buildings woods.

Razeen® SL 4072X75 is a typical type 2 epoxy resin based on Bisphenol A as solvent cut 75% in Xylene. The resin is similar to solid resin Razeen® SR 5072 in performance.

Concentrated pigment dispersions for use in solvent borne high performance coatings. PanTINT 86 Colorants are based on a unique thermoplastic acrylic vehicle with exceptionally broad compatibility. Pigments used in the PanTINT 86 Series have been selected for superior lightfastness, and resistance to heat and chemical attack.

High strength 100% solid colorants with broad compatibility in a wide variety of conventional, low and zero VOC water based coatings and inks. Pigments used in PanTINT 18 Series have been selected to meet the durability and transparency requirements of most high performance applications.

NOVALKYD S1010-70BA, is a resin suggested to formulate industrial enamels with high hardness development and fast drying curing. Resin for high solid and high performance enamels.

Dynoadd® F-707 is Foam control additive for solvent borne coating formulations, Instant release of surface foam, Anti-popping, Anti-foam, Non-silicone.

Red 3633 is a Colorant for Plastic, Paint, Ink and Stationery.

High strength colorants with broad compatibility in a wide variety of conventional and low VOC water based systems. PanTINT ® 90 Colorants are based on a proprietary combination of surface active agents for exceptionally broad compatibility and stable viscosity for easy use. They will not dry out in part full containers and have little or no effect on gloss, cure time, resistance to water spotting or exterior durability. They are freeze-thaw stable and will not support the growth of microorganisms

LIONOL BLUE ESP-S is an epsilon form phthalocyanine blue pigment with a very bright reddish shade, high color strength and excellent rheological properties.

Vibfast Orange 4050 is an Organic Pigment.

Asiafine Chemical Truveal Orange 340 is a Organic pigment used for industrial and automotive paints, decorative paints, printing inks, plastics and various special applications.

MIX2FIX Bronze is a general-purpose, bronze filled, non-corroding, two-part epoxy repair paste. It can be used to make tough, permanent repairs to bronze and other non-ferrous metals, ceramics, porcelain, concrete, wood, and some hard plastics.