Products in Industrial Maintenance

Serkyd S22TX60 is a soybean oil based, chain stopped modified, short oil alkyd resin is used in industrial primer and paints, hammertone top coat paints.

DISPHERHIC D CHROMA WHITE PW 6 colorant is specifically designed for tinting high performance, non-aqueous, industrial and maintenance coatings. It is based on an unique universal resin technology (modified Ketone Aldehyde).

High strength colorants with broad compatibility in a wide variety of conventional and low VOC water based systems. PanTINT ® 90 Colorants are based on a proprietary combination of surface active agents for exceptionally broad compatibility and stable viscosity for easy use. They will not dry out in part full containers and have little or no effect on gloss, cure time, resistance to water spotting or exterior durability. They are freeze-thaw stable and will not support the growth of microorganisms

Vibfast Red 4035 is a Organic Pigment.

Vibfast Yellow 4012 is a Organic Pigment.

Concentrated pigment dispersions based on a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. PanTINT 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability

Chemguard S-764P-14A High Performance Anionic Fluorosurfactant is a short-chain, phosphate ester type fluorosurfactant. It is water-based and free from volatile organic compounds (VOC). It provides surface tensions as low as 18 dyn/cm in water at very low concentrations. Chemguard S-764P-14A imparts excellent wetting, spreading, leveling, anti-blocking, and flow control properties on various types of water-based coatings for architectural paints and stains, concrete coatings, industrial coatings, and hydrocarbon surfactant solutions. Chemguard S-764P-14A has excellent dynamic surface tension properties which allow for the rapid attainment of low equilibrium surface tensions. It is low foaming and can provide improved dirt pick-up resistance to exterior paints and interior low-gloss paints, sealers, and stains.

CLiQFLOW® 709 is an amide modified hydrogenated castor oil based thixotropic additive for nonto mid-polar solvent based systems. It imparts a strongly shear thinning flow behavior with excellent sag resistance and good flow and leveling. Anti-settling properties and workability are also improved markedly with the organic thixotrope.

Vibfast Yellow 4009 is a Organic Pigment.

Unikyd L-100 offers a comprehensive array of synthetic resins including long, short, medium oil alkyds, hammertone medium, rosin modified, chain stopped & styrenated alkyds. Used in Primers, Under coats, Architectural finishes, Industrial enamels.

Admark Polycoats AP 1562 is a fast cure, go-od blush resistance and adhesion. its used in marine coating, protective coating, industrial coatings and construction concrete.

High strength 100% solid colorants with broad compatibility in a wide variety of conventional, low and zero VOC water based coatings and inks. Pigments used in PanTINT 18 Series have been selected to meet the durability and transparency requirements of most high performance applications.

Glyptal® 74004 is designed to give maximum durability and resistance; used on industrial equipment exposed to oils, coolants and other corrosive agents; frequently used on large end windings.

Indofil Industries Indofil HSD 45 is the latest introduction in the basket of dispersing agents from Indofil Range. It is a highly effective, low viscosity dispersing agent for water-borne coating systems.

EMARUST® CL7-w is a ready to use aqueous solution, nitrite free and metal salts free.

Endmoun C 33 NT is a non drying resin but fast curing when combined with amino resin to produce stoving enamel.

Wetting and dispersing additive, emusifier for universal pastes in solvent borne coating systems, biodegradable. SCHWEGO wett 8085 is preferably used in color mixing, coating systems and pastes. SCHWEGO wett 8085 shows an especially high compatibility in solvent borne short, medium and long oil alkyd resins. SCHWEGO wett 8085 is also suitable for PU-systems, emulsions, silicate paints, polyesters and epoxide systems.

SILLIKOLLOID P 87 puriss is a finest particle size distribution with good color neutrality.

Amparmor® 1000 is a uniquely engineered microcapsule containing a patented blend of healing agent based on silicone-based resins, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating applications where coating self-healing is needed for extended coating durability. AMPARMOR® 1000 is recommended for use in liquid solvent-based, water-based resins and powder coatings, and is compatible with most coating resin types including epoxy, polyester, polyurethane and acrylic systems.

US Polymers - Accurez LLC Epi-Tex 183-HS is fast drying resin for use in corrosion resistant industrial coatings, corrosion resistant primers.Epi-Tex 183-HS offers adhesion to a variety of unusual substrates including: ceramic tile, formica, porcelain and direct to metal coatings.

High strength, APE free colorants with compatibility in a wide variety of conventional, low and zero VOC* water based systems. Easy to use PanTINT 94 Colorants are based on a proprietary combination of surface active agents resulting in exceptional system compatibility. They have little or no effect on viscosity, gloss, cure time, resistance to water spotting or exterior durability. They will not support the growth of microorganisms.

A moderate defoamer with minimum side effects

CLiQSPERSE127 is a highly efficient low foaming wetting agent for aqueous and non-aquoeus systems. The non-ionic modified polyglycolether block co-polymer is APE-and VOC-free.

PETOL 160-3 is a polyoxypropylene triol, 1055 average molecular weight. It is the standard polyol for one-component spray foams.

High strength 100% solid colorants with broad compatibility in a wide variety of conventional, low and zero VOC water based coatings and inks. Pigments used in PanTINT 18 Series have been selected to meet the durability and transparency requirements of most high performance applications.

Prasad International Pigment Yellow 3 is recommended for decorative paints but limited suitability to automotive paints and general industrial paints.

High strength colorants with broad compatibility in a wide variety of conventional and low VOC water based systems. PanTINT ® 90 Colorants are based on a proprietary combination of surface active agents for exceptionally broad compatibility and stable viscosity for easy use. They will not dry out in part full containers and have little or no effect on gloss, cure time, resistance to water spotting or exterior durability. They are freeze-thaw stable and will not support the growth of microorganisms

Armorlux 2500 Enamel is the latest innovation in a high gloss, tough, durable industrial maintenance alkyd enamel. It is resistant to mild industrial fumes. It is extremely colorfast and is available in a wide range of colors. It is carefully formulated for excellent smoothness and easy application and contains no lead, mercury or other toxic pigments.

Vibfast Red 4039.1 is a Organic Pigment.

The PanTINT® 81 Series are volumetric / gravimetric factory colorants for solvent-based industrial maintenance, general industrial finishes and wood coatings. The PanTint® 81 Series are prime examples of optimized dispersions, rendering the maximum color value of each color pigment. As with the other PanTint® Series of products, you can expect broad compatibility with a wide range of resin systems. The pigment selections are selected based on performance requirements often seen in industrial applications; colorfastness, weather and chemical resistance.

SILLITIN N 85 has a slightly higher requirements in color than SILLITIN N 82

The use of Deuteron OG 250 affects the surface characteristics of aqueous coating systems.The low melting point of the used paraffine-wax reduces unwelcome high slipperiness of certain binders (dispersions). Because of this property the product is also suitable as an additive to produce water-based „soft-feeling-lacquers“. On the other hand the use of Deuteron OG 250 can increase the slipperiness of coatings, when the properties imparted by the used binder are not satisfactory.Application Aqueous finishing lacquers, packing lacquers, printing inks and aqueous wood stains. „Soft-feeling-lacquers“ for industrial application (combined with matting plastic Deuteron MK). back

EPOTUF® 38-690 is an epoxy ester solution which, when neutralized with an organic amine, can be formulated into VOC-compliant, water-based primers and enamels for air dry and bake applications

Concentrated pigment dispersions for use in solvent borne high performance coatings. PanTINT 86 Colorants are based on a unique thermoplastic acrylic vehicle with exceptionally broad compatibility. Pigments used in the PanTINT 86 Series have been selected for superior lightfastness, and resistance to heat and chemical attack.

CamCure 2450 by Champion Advanced Materials (Singhania Group) is polyamidoamine. It acts as a hardener. It is used in coatings and primers for damp or wet concrete. CamCure 2450 is suitable for corrosion protection under severe conditions and marine maintenance.

Acrylic resin cross-linking with polyisocyanate