Products in Printing & Packaging: Pigment

Ti-Pure™ R-104 is a rutile titanium dioxide pigment manufactured by the chloride process. It is supplied as a fine, dry, white powder and is specifically designed to give outstanding melt flow with highly loaded thermoplastic masterbatches. Ti-Pure™ R-104 combines high tint strength with a blue undertone. This product offers excellent lacing resistance in high-temperature extrusion coating and cast film applications.

Ti-Pure™ R-350 is designed to exceed today’s expectations for titanium dioxide and set tomorrow’s standard in plastic formulations. This product is intended for formulators looking for a single grade of TiO2 with performance suitable for a wide range of plastic end uses. It provides a matchless combination of excellent dispersion and processing, minimal volatile content, minimal interaction with polymer additives, durability, and the brightness that only chloride-produced rutile TiO2 can provide. This product is the only TiO2 available that can offer such an exceptional set of properties.

DCL 5651 Phthalocyanine Blue, PB.15:1 (A4R Type) is an alpha crystal form red shade, phthalocyanine blue. 5651 is FDA-approved (Section 178.3297). It has good overall resistance properties. It finds major applications in plastics such as PVC, PP and PE, inks, paints, and coatings.

DCL 1149 Perylene Red, PR.149 is a transparent, blue-shade red pigment with excellent heat stability and overall properties. Specifically manufactured to meet a filter value specification of less than 2.0 bar/gram, it is recommended for use in solvent-based industrial and powder coatings, solvent-based printing inks, and plastic applications such as flexible and rigid PVC, PE, PP, PS, ABS, and other engineering resins processed at high temperatures. It can also be used to color nylon and other synthetic fibers.

DCL 1219 Quinacridone Red Violet, PV.19 (E5B type) is a bright, yellow shade quinacridone with excellent overall properties. This pigment is FDA approved (Section 178.3297) and finds major applications in the following: Plastics such as PVC, PP, PS, PE and PET. Automotive/aerospace, decorative, powder and industrial coatings. Solvent flexo, water flexo, inkJet, UV and offset inks

DCL 3327 Phthalocyanine Green, PG.7 is a medium-shaded phthalo green offering excellent rheology in some solvent systems. It exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of plastic, coating, and ink applications.

DCL 8817 Transparent Red Iron Oxide, PR.101 is a high performance transparent red iron oxide offering high color strength, weather resistance, and UV protection properties. 8817 is recommended for PVC plastics, automotive, aerospace, industrial, powder, and wood coatings, as well as solvent flexo inks.

DCL 1370 Naphthol Red, PR.170 is a very bright, yellow-shaded naphthol red with very good lightfastness, opacity, flow properties, and chemical resistance. The shade of 1370 is yellower and more opaque compared to that of 1970A. It is a reliable and versatile choice for various plastic, ink and coating applications.

DCL 2413 Diarylide Yellow, PY.13 is an AAMX medium-shade diarylide yellow offering good opacity and tinting strength compared to other diarylide pigments. It exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of inks, plastics, and coating applications.

DCL 3777 Phthalocyanine Green, PG.7 (blue shade) is a bright, blue-shaded phthalocyanine with excellent overall properties. The product is FDA-approved (Section 178.3297) and recommended for various applications in inks, coatings, and plastics. It can be easily dispersed in plastics, coatings, and water-based flexo inks.

DCL Orange GX Pyrazolone Orange, PO.13, is an orange pigment that provides a bright red shade of orange, commonly used in offset and aqueous inks. Additionally, DCL Orange GX is versatile enough to be used in a wide range of paint and plastic applications.

DCL AG425 Prussian Blue, 10 - 60 m is a gold pearlescent pigment with a brilliant finish. It is FDA approved (Section 178-3297). This product is mainly used in the following applications Plastics such as PVC, PP, PS, PE and PET. Powder and industrial coatings. UV and offset inks. Rubber

DCL 2870 Naphthol Red, PR.170 is a blue-shaded red pigment for use where good overall fastness properties are required. It exhibits good overall resistance properties, including lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of paint, plastic, and ink applications.

DCL 7222 Quinacridone Magenta, PR.122 is a highly versatile pigment suitable for use in coatings, inks, and plastic applications. This blue-shaded red pigment is FDA-approved and offers a clean, vibrant shade with excellent fastness properties. Widely used for shading other reds, creating special-effect metallic finishes, and formulating pinks, PR.122 is the basis for the magenta colorant worldwide and is employed in virtually all machine tinting systems, both architectural and industrial.

DCL 1634 Pyrazolone Orange, PO.34, is a bright, strong, redder-shaded transparent type Azo Orange with fair lightfastness. With good overall resistance properties, this product is widely used in various applications, such as plastics like PVC and PC, industrial and powder coatings, and water-flexo and solvent-flexo inks, among others.

DCL AG500 Bronze, 10 - 60 m is a bronze pearlescent pigment with a brilliant finish. It is FDA approved (Section 178-3297). This product is mainly used in the following applications Plastics such as PVC, PP, PS, PE and PET. Powder and industrial coatings. UV and offset inks. Rubber

DCL 1419 Quinacridone Violet, PV.19 is a bright, blue-shaded quinacridone with a similar shade to thioindigo red, and it has excellent overall properties. This pigment is FDA-approved (Section 178.3297) and is recommended for use in inks, high-grade industrial paints, implement enamels, agricultural equipment, and powder coating applications.

DCL 8300P Phthalocyanine Blue, PB.15:3 is a beta-shaded phthalocyanine blue pigment that is characterized by its easy dispersibility. This pigment is FDA-approved (Section 178.3297). It exhibits good overall resistance properties, lightfastness, and heat stability, making it a reliable and versatile choice for a range of applications.

DCL 1229 Quinacridone Magenta, PR.122 (Blue shade) is a standard magenta shade PR 122 that exhibits all the typical properties of quinacridone pigments. It is a low-warpage pigment, recommended for plastics, coatings, and inks, and finds a wide range of applications in coatings, such as trade sales, automotive, agricultural equipment, architectural paints, and industrial finishes. Its excellent heat stability and exterior durability make it suitable for use in various polymeric resin systems, such as polyolefins, polystyrene, polycarbonate, and ABS.

DCL 1816 Dianisidine Orange, PO.16 is a blue-shade Dianisidine Orange pigment designed for non-exterior film, blow molding, injection molding, and wire and cable applications. It offers very good heat stability up to 240°C and has a high tint strength compared to other orange color indices. DCC 1816 is considered to be the most cost-effective lead-free alternative to molybdate orange.

DCL A3R Indanthrone Blue, PB.60 is a red shade of highly saturated blue that combines very good tinctorial properties with excellent fastness properties. DCC Blue A3R is a highly transparent blue suitable for opaque and effect shades and is used in high-end coatings, plastics, and ink applications.

DCL 2316 Dianisidine Orange, PO.16 is a bright yellow shade orange with good opacity and tinting strength mainly for interior applications. This pigment is mainly used in the following applications: Plastics such as PVC and PE Powder and industrial coatings. Solvent flexo, water flexo and UV inks Rubber products

DCL 1073-A DPP Orange, PO.73 is a medium shade opaque orange pigment with very good light and chemical resistance. This pigment is mainly used in the following applications: Plastics such as PVC, PP, PS, PE and PET. Automotive/Aerospace, powder and industrial coatings. Solvent flexo inks Rubber products

DCL AG401A Luster Black, 10 - 60 m is a silver gray translucent pearlescent pigment that boasts a brilliant finish, and it is approved by the FDA under Section 178-3297. The mixture that comprises this pigment is made up of mica, titanium dioxide, and carbon black, resulting in a silver gray powder as its appearance.

DCL 410 Carbon Black, PBk.6 (Granular) is a smaller particle size, low cost granular carbon black pigment. It is the most jet of our low-cost carbon blacks however, it has the highest viscosity. 410 is particularly suitable for coatings, plastics requiring excellent UV properties, and solvent-based inks.

DCL 1144 Disazo Red, PR.144 is a medium to slightly blue-shade red pigment with high purity, tinting strength, and excellent heat stability. It is primarily used in the coloration of plastics such as PVC, ABS, polystyrene, polyolefins, and polyester spin dyeing, and is also used in some specialty coatings and inks, though it can cause warpage in HDPE.

DCL 1836 Azo Orange, PO.36 is an opaque grade of PO.36 that exhibits a reddish-shaded orange color with excellent light and weather fastness characteristics. 1836 provides high opacity and good flow properties in a variety of plastics, coatings, and inks.

DCL 7354 DPP Red, PR.254 is a yellow-shaded DPP that offers excellent opacity, high color saturation, weather resistance, heat stability, acid, alkali, and solvent resistance. It is recommended for high-end coatings and high-end plastics applications, and is FDA compliant for indirect food contact plastic applications.

DCL 2188 Naphthol Red, PR.188 is a bright, yellow-shaded naphthol red with good flow properties, bleed resistance, lightfastness, and weather fastness. It is recommended for higher-grade exterior industrial paints, exterior trade sales coatings, colorant systems for in-plant tinting or machine colorants, printing inks, mass coloration of paper, paper surface coating, paper pulp coloration, wax crayons, and inks for wallpaper use. It is also recommended for use in plastics.

DCL 3017-A Phthalocyanine Green, PG.7 is a strong, medium-shade phthalocyanine green pigment that is FDA-approved (Section 178.3297). It exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of inks, plastics, and coating applications.

DCL 2113 Pyrazolone Orange, PO.13 is a bright, clean, transparent pyrazolone orange pigment with excellent tinting strength. 2113 has fair lightfastness in masstone/deep shades and is poor in tints. It is recommended to be used in a wide range of plastic, ink, and coating applications.

DCL 3136 Phthalocyanine Green, PG.36 is a strong, yellow-shaded, fully brominated phthalocyanine green pigment of excellent value, tinting strength, and color purity. 3136 has excellent overall properties. It is recommended to be used in a wide range of plastic, ink, and coating applications.

DCL 2217 Diarylide Yellow, PY.17 is a strong, transparent green shade of Diarylide Yellow that offers excellent value for use in various printing ink applications, such as water-based, nitrocellulose-based, and polyamide-based inks and metal deco printing, as well as in some plastics applications, including polyolefins, printing on PVC film, and polyurethane foams, and in some air-dry industrial coatings and textile printing.

DCL 1176 Benzimidazolone Red, PR.176 is a transparent, bright, blue-shaded red with good overall fastness properties. The product has a wide range of applications, including its use in plastics such as PVC, PP, PS and PE, as well as in powder and industrial coatings. Additionally, it is also used in solvent flexo and inkjet inks.

DCL 8916 Transparent Yellow Iron Oxide, PY.42 is a high-performance transparent yellow iron oxide offering high color strength, weather resistance, and UV protection properties. 8916 is recommended for PVC plastics, automotive, aerospace, industrial, powder, and wood coatings, as well as solvent flexo inks.

DCL 5051 Phthalocyanine Blue, PB.15:1 is an alpha crystal form of a red-shaded phthalocyanine blue that is rendered solvent stable. 5051 is FDA-approved (Section 178.3297), and is recommended for applications such as general industrial paints, various coatings, printing inks, plastics, rubber, floor coverings, and textile printing.