Products in Base Chemicals & Intermediates: Acrylics & Acrylates

PHOTOMER® 4006 TF (TMPTA) is a toluene free aliphatic trifunctional acrylate of low viscosity and excellent crosslinking reactivity. In comparison to other trifunctional acrylates, it is an effective reactive diluent with excellent solvency and viscosity reducing characteristics in UV/EB curable formulations based on epoxy, polyurethane, and polyester oligomers

PHOTOMER® 4149 is an aliphatic trifunctional acrylate of low viscosity, low skin irritancy and excellent crosslinking reactivity. In comparison to other trifunctional acrylates, it is an unusually effective reactive diluent with excellent solvency and viscosity reducing characteristics in radiation curable formulations based on epoxy, polyurethane, and polyester oligomers.

PHOTOMER® 4006 (TMPTA) is an aliphatic trifunctional acrylate of low viscosity and excellent crosslinking reactivity. In comparison to other trifunctional acrylates, it is an effective reactive diluent with excellent solvency and viscosity reducing characteristics in UV/EB curable formulations based on epoxy, polyurethane, and polyester oligomers.

MM-220 is a low viscosity mono-acrylate monomer. The polycyclic ring structure helps minimize shrinkage on cure. It also has low weight loss on cure. 

Photomer® 4158 is a high molecular weight analog of ethoxylated TMPTA (Photomer® 4149). Because of its increased ethoxylate content, Photomer® 4158 exhibits greater hydrophilic characteristics than unmodified acrylate polyols and will provide an excellent starting point for developing water dispersible UV/EB curable inks and coatings.

Photomer® 8061 is a novel aliphatic monofunctional acrylate (TPGMEMA) of low skin irritancy, low viscosity, low surface tension and low odor. It exhibits good solvency and viscosity reducing characteristics with typical UV/EB curable oligomers and prepolymers.

Photomer® 4135 is a low odor, low volatility mono-functional acrylated monomer which can be polymerised in the presence of free radicals. It is typically used in UV- and EB curable applications and is particularly suited to use in coatings for optical media.

CE CRYL 800T is a 80% Epoxy Acrylate Oligomer with 20% monomer (TPGDA) .

BAMM ETHYL ACRYLATE is used in the production of coatings and inks, adhesives, sealants, plastics and elastomers.

PHOTOMER® 4017 (HDDA) is a low viscosity diluent for UV and EB radiation curable lacquers and pigmented coatings, used in paper and board coatings, wood finishes vinyl flooring and flexible vinyl.

Bisomer® PEA6 is a hydroxyl functional methacrylate monomer.

BAMM N-BUTYL ACRYLATE is a colorless volatile liquid with an acrid odor. It is used in the production of coatings, elastomers, adhesives, thickeners, surfactants, fibers, plastics, textiles and inks.

PHOTOMER® 4142 (THFA) is a low viscosity mono-functional acrylated monomer which can be polymerised in the presence of free radicals. It is typically used in UVand EB curable applications. Photomer 4142 offers good flexibility and toughness, low Tg and excellent solvency.

PHOTOMER® 4399 is a medium viscosity mixture of penta-acrylate and hexa-acrylate monomer for UV/EB curable coatings and inks on paper, foil, wood and plastic substrates. It imparts excellent abrasion and scratch resistance as well as fast cure response together with good water and chemical resistance when formulated into UV/EB curable applications.

PL-3122 Propoxylated Tetrahydrofurfuryl Acrylate is a monofunctional monomer providing good adhesion to plastics and low viscosity.

PHOTOMER® 4141 (CTFA) is a low viscosity mono-functional acrylated monomer which can be polymerised in the presence of free radicals. This Cyclic Trimethylolpropane Formal Acrylate (CTFA) is typically used in UV and EB curable applications. PHOTOMER® 4141 offers good solvency and very good adhesion properties on metals and plastics.

Photomer® 4039 is a monofunctional aromatic acrylate of low viscosity, low odor, moderate cure speed and classified as a mild skin irritant. Due to modification of its aromatic backbone, it has been found useful as a flexibilizer and is suggested for UV curable litho, screen and flexographic inks, clear litho coatings, and lacquers.

CE CRYL 10000 is a Low Viscosity 100% Epoxy Acrylate Oligomer.

FONTAINE SHAN 2-Isocyanatoethyl methacrylate is used as a cross linker for adhesive resins and coatings.

PHOTOMER® 4094 (GPTA) is an aliphatic trifunctional acrylate of low viscosity, low skin irritancy and excellent reactivity. Designed for UV/EB curable systems, it produces films of high crosslink density which are more flexible than those of first generation monomers such as TMPTA without sacrificing cure speed.

UVP 0205, Di Propylene glycol diacrylate (DPGDA) is a Difunctional monomers, which polymerize when, expose to sources of free radicals. It is an excellent low viscosity economical diluent .It is compatible with a wide range of acrylated resins.

bossin® W-123 has a high UV curing activity with no solvents and dilute with 20%TPGDA.

UVP 0303, Di-­Trimethylol propane tetracrylate (DiTMPTA) is a liquid monomer with fast cure response and low volatility during free radical polymerization.It has a low skin irritancy and high cross density upon curing.

UVP 0103 99 is a clear liquid with low viscosity and good solvency.

UVP 0302, Ethoxylated(3) Trimethylol propane triacrylate (Etho .TMPTA) is a low viscosity liquid monomer with fast cure response and low volatility during free radical polymerization.It has a low skin irritancy.

bossin® W-153 has an high UV curing activity with no solvents.

bossin® W-102 has a high UV curing activity with no solvents and dilute with 15%TMPTA.

PHOTOMER® 4812 is a mono functional acrylate monomer, used as flexibilizing agent in coatings and inks. It will also increase water resistance properties due to its hydrocarbon backbone.

Photomer® 4157 is a medium molecular weight analog of ethoxylated TMPTA. It exhibits good hydrophilicity due to its increased ethoxylate content and thus provides an excellent starting point for developing water dispersible UV/ EB curable inks and coatings.

PHOTOMER® 4072 is an aliphatic trifunctional acrylate of low viscosity, low skin irritancy and high crosslinking reactivity. It exhibits less shrinkage and better adhesion to a variety of substrates versus typical first generation crosslinkers, and is recommended as a direct replacement for TMPTA and EOTMPTA in many UV/EB curable applications.

MM-290 is a liquid mono-functional acrylate monomer. It has similar properties as Isobornyl Acrylate (IBOA) when polymerized but with lower weight loss on cure. It has a mild, pleasant odor. MM-290 has good resistance to hydrolysis.

UVP 0401, Pentaerythritol tetracrylate (PETA) is a liquid monomer with fast cure response and low volatility during free radical polymerization. It has a low skin irritancy and high cross density upon curing.

bossin® W-30 has a high elastic and low temperature flexibility with carboxyl react, with hardener of amino resin and polyurethane resin. The crosslinking reaction is very well, form a toughness and elastic film.

bossin® W-05 is a hydrophilic but insoluble in water. It has excellent properties like curing faster, improve the adhesion of metal and plastic. It has an acid value which is higher than B-02.

BAMM ACRYLIC ACID is used in the manufacture of chemicals and chemical products, primarily acrylate esters, acrylate salts, and polymers for use in a variety of products including paints and coatings, adhesives, and treatments for leather and textiles.

UVP 0101 99 is a clear liquid with low viscosity and good solvency.