Products in Technical Salts & Inorganics: Buffers & pH Stabilizer

AllanChem Magnesium Oxide is a white to off-white powder that is almost insoluble in water and alcohol. It exothermically reacts when dissolved in diluted mineral acids. This high-quality product is sieved and is used in a number of applications.

OceanCal™ 8S Oolitic Aragonite is one of the world's purest forms of the ocean's naturally precipitated biogenic calcium carbonate. Naturally renewable and sustainable. Highly bioavailable calcium. High surface area. High brightness. High microporosity. High chemical purity. Offered in a range of controlled particle sizes. Can be offered without stearic acid surface treatment (please see "OceanCal 8U" product). Applications include, but are not limited to: agriculture, PVC, plastics, rubber, pharmaceuticals, nutraceuticals, and water treatment.

SandyCal™ 20/50 Oolitic Aragonite is one of the world's purest forms of the ocean's naturally precipitated biogenic calcium carbonate. Naturally renewable and sustainable. Highly bioavailable calcium. High surface area. High microporosity. High chemical purity. Offered in a range of gradations. Approved for use in organic production in accordance with the USDA National Organic Standards. Applications include, but are not limited to: agriculture, cement, landscaping, glass, calcium supplements, aquariums, livestock odor neutralization, infill, stucco, sandblasting, and water treatment.

Sulfuric Acid 93% - 98%

OceanCal™ 3S Oolitic Aragonite is one of the world's purest forms of the ocean's naturally precipitated biogenic calcium carbonate. Naturally renewable and sustainable. Highly bioavailable calcium. High surface area. High brightness. High microporosity. High chemical purity. Offered in a range of controlled particle sizes. Can be offered without stearic acid surface treatment (please see "OceanCal 3U" product). Applications include, but are not limited to: agriculture, PVC, plastics, rubber, pharmaceuticals, nutraceuticals, and water treatment.

Potassium carbonate (K2CO3) is a translucent and odorless organic alkaline solution or a white and odorless solid chemical compound that is available in crystalline granulated or powder form. K2CO3 is also known as potash carbonate and is used in fertilizers, agrochemicals, heat-resistant glass, soaps, and in the manufacturing of other chemical compounds. Vynova supplies several grades of potassium carbonate to customers worldwide. Please contact us for additional information about our low chlorate potassium derivatives range.

OceanCal™ 8U Oolitic Aragonite is one of the world's purest forms of the ocean's naturally precipitated biogenic calcium carbonate. Naturally renewable and sustainable. Highly bioavailable calcium. High surface area. High brightness. High microporosity. High chemical purity. Offered in a range of controlled particle sizes. Approved for use in organic production in accordance with the USDA National Organic Standards. Can be offered with stearic acid surface treatment (please see "OceanCal 8S" product). Applications include, but are not limited to: agriculture, paints, coatings, adhesives, sealants, PVC, plastics, rubber, pharmaceuticals, nutraceuticals, cosmetics, and water treatment.

OceanCal™ 5U Oolitic Aragonite is one of the world's purest forms of the ocean's naturally precipitated biogenic calcium carbonate. Naturally renewable and sustainable. Highly bioavailable calcium. High surface area. High brightness. High microporosity. High chemical purity. Offered in a range of controlled particle sizes. Approved for use in organic production in accordance with the USDA National Organic Standards. Can be offered with stearic acid surface treatment (please see "OceanCal 5S" product). Applications include, but are not limited to: agriculture, paints, coatings, adhesives, sealants, PVC, plastics, rubber, pharmaceuticals, nutraceuticals, cosmetics, water treatment.

SandyCal™ RW (raw) Oolitic Aragonite is one of the world's purest forms of the ocean's naturally precipitated biogenic calcium carbonate. SandyCal RW is raw, unprocessed aragonite. Naturally renewable and sustainable. Highly bioavailable calcium. High surface area. High microporosity. High chemical purity. Also offered in a range of dried/screened gradations. Approved for use in organic production in accordance with the USDA National Organic Standards. Applications include, but are not limited to: agriculture, landscaping, calcium supplement, aquariums, and water treatment.

OceanCal™ 5S Oolitic Aragonite is one of the world's purest forms of the ocean's naturally precipitated biogenic calcium carbonate. Naturally renewable and sustainable. Highly bioavailable calcium. High surface area. High brightness. High microporosity. High chemical purity. Offered in a range of controlled particle sizes. Can be offered without stearic acid surface treatment (please see "OceanCal 5U" product). Applications include, but are not limited to: agriculture, PVC, plastics, rubber, pharmaceuticals, nutraceuticals, and water treatment.

SandyCal™ 20/80 Oolitic Aragonite is one of the world's purest forms of the ocean's naturally precipitated biogenic calcium carbonate. Naturally renewable and sustainable. Highly bioavailable calcium. High surface area. High microporosity. High chemical purity. Offered in a range of gradations. Approved for use in organic production in accordance with the USDA National Organic Standards. Applications include, but are not limited to: agriculture, cement, landscaping, glass, calcium supplements, aquariums, livestock odor neutralization, infill, and water treatment.

OceanCal™ 3U Oolitic Aragonite is one of the world's purest forms of the ocean's naturally precipitated biogenic calcium carbonate. Naturally renewable and sustainable. Highly bioavailable calcium. High surface area. High brightness. High microporosity. High chemical purity. Offered in a range of controlled particle sizes. Approved for use in organic production in accordance with the USDA National Organic Standards. Can be offered with stearic acid surface treatment (please see "OceanCal 3S" product). Applications include, but are not limited to: agriculture, paints, coatings, adhesives, sealants, PVC, plastics, rubber, pharmaceuticals, nutraceuticals, cosmetics, and water treatment.

Fluoroboric Acid (HBF₄) is a corrosive liquid.• Our high purity synthetic fluoroboric acid has very low level of heavy metals, compared to by product options.• Thanks to its very low impurity level, our Fluoroboric Acid is ideal for the most demanding applications.• We have a highly flexible filling system, which enables us to offer a wide range of packaging solutions to our customers. Jerricans and IBCs are our standard formats.• Our continuous production and robust inventory, together with our logistic service, make it possible to offer just-in-time delivery to our customers’ facilities across the world.

PCC Chemax Hydrochloric acid min. 33%, synthetic is a chemical compound which is an aqueous solution of hydrogen chloride gas. It has strong corrosive properties, a strong, irritating odor, and colorless to pale yellow. Hydrochloric acid synthetic grade is produced by direct synthesis of elements - burning chlorine in hydrogen and then absorbing hydrogen chloride into water. Hydrochloric acid synthetic grade is supplied to the market at a concentration of 33% to 35.5%.

PCC Chemax Pure hydrochloric acid 37% is a chemical compound that is an aqueous solution of hydrogen chloride gas. It has strong corrosive properties, a strong, irritating odor, and colorless to pale yellow. Hydrochloric acid pure grade is produced by direct synthesis of elements by burning chlorine in hydrogen and then absorbing hydrogen chloride into water. The product is marketed in a 37% to 38% solution.

PCC Chemax Caustic soda lye 40% solution is an inorganic chemical compound of the hydroxide group, belonging to the strongest alkali. In liquid form it is a colorless, odorless and non-flammable product called caustic soda liquid. It belongs to a group of basic raw materials, so it is used almost in every industry.

GREENLINETM Soda Lye (50% aqueous solution) belongs to inorganic chemical compounds from the hydroxide group. The product is manufactured in an environmentally friendly production process based on membrane technology, which is currently the most modern technology in the world. Membrane technology uses significantly less energy compared to other methods for obtaining sodium hydroxide. In addition, the energy consumed in the production of GREENLINETM Soda Lye is covered by guarantees of origin of energy from renewable energy sources. These guarantees are issued only for energy produced from renewable sources, contributing to a significant reduction in CO2 emissions into the atmosphere.

Carmeuse Hydrated Lime is used in iron and steel foundries as a lime whitewash coating on the molds to prevent sticking and provide temporary corrosion protection of finished products. Castings can get sticky or difficult to remove hydrated lime aids in the release of these shapes from the molds. Acidic environments can harm the surface of finished products; hydrated lime’s acid neutralization properties can prevent damage to your finished products.

Natrium® 260 is used in most fire & mold restoration, automotive & diesel engines, aerospace parts, turbines, pumps, turbo chargers, tanks, valves, and remanufacturing. Heavy coatings. Applications where efficiencies would be realized by degreasing and removing coatings in a single step.

PCC Chemax Hydrochloric acid 33% grade is a by-product of MCAA (monochloroacetic acid) production process. It is highly corrosive, has a pungent, irritating smell, transparent to pale-yellow color. It is delivered to the market in liquid form in concentration from 33% to 34%, in 1000L IBC containers, in 24 t road tank cars, in 56 t dedicated rail tank cars. The hydrochloric acid 33% is produced in the process by chlorination of organic compounds.

Carmeuse Dolomitic Quicklime is used in combination with high calcium lime as a fluxing agent to achieve proper slag chemistry and physical properties. Dolomitic quicklime is critical to producing quality steel and controlling your costs. Carmeuse Dolomitic Quicklime has the proper magnesium content to balance and protect your refractories.

Natrium Products Dense Soda Ash is a white powder or granular substance refined from the mineral trona. It is a vital raw material in many industrial applications, such as detergents, chemicals, and glass manufacturing. Natrium Products customers utilize Soda Ash in waste and water treatment, paper manufacturing, detergent manufacturing, and the chemical industry. Natrium Products offers both high purity and dense soda ash. Our soda ash is of the highest quality and meets tight specification limits. While Natrium’s dense soda ash is suitable for most applications.

Sodium hydroxide in solid form, also called caustic soda, is an inorganic chemical compound belonging to the strongest alkali. In solid form, it is a white substance with crystalline appearance (flakes). It has hygroscopic properties. It is perfectly soluble in water, forming corrosive soda lye , which is accompanied by the release of significant amounts of heat.

PCC Chemax Hydrochloric acid technical grade CH, min.31% is an aqueous solution of hydrogen chloride gas. It is a strongly corrosive liquid with a sharp, irritating odor and color from colorless to light yellow. This product is delivered to the market in the form of liquid with a concentration of min. 31%. Hydrochloric acid (technical grade) is a by-product in the chlorobenzene chlorination process.

Ercros Caustic soda is one of the chemical products with the greatest presence in industrial activity.

PCC Chemax Hydrochloric acid for food grade industry 33% is a chemical compound that is an aqueous solution of hydrogen chloride gas. It has strong corrosive properties, a strong, irritating odor, and colorless to pale yellow. Hydrochloric acid food grade is produced by the direct synthesis of elements - burning of chlorine in hydrogen and then the absorption in the water of the resulting hydrogen chloride. Hydrochloric acid is supplied to the market at a concentration of 33% to 35.5%.

Sheldon International Sulphamic Acid are used in various applications such as paper & pulp industry, plastic industry, electroplating and electro-refining and many others.

Reagent Chemical and Research Hydrochloric Acid, also known as muriatic acid, is an aqueous solution of hydrogen chloride (HCl). It is a clear, colorless solution with a distinctive pungent odor. It is used in the production of other industrial chemicals, food and steel processing, water treatment and energy production. It is produced from by product and burner producers.

Energochemica SE Sulfuric acid is widely used in the chemical industry, in the processing of ores and fertilizers, as a drying agent, pH regulator, in surface treatment, electrolytic processes, for gas cleaning and flushing, for production, maintenance and recycling of batteries, for industrial cleaning, as laboratory chemicals, etc.

Natrium® 150 is used in some fire & mold restoration, wood surfaces, and applications where delicate coating removal & surface preparation with minimal substrate damage are required.

Slaked lime of Calcium Hydroxide is the hydroxide of lime is used fundamentally in all those processes in which it is necessary a correction of the pH. It is also used in construction to elaborate mortars and other plaster materials.

NCP Chlorchem Hydrochloric Acid is a colorless to slightly yellow solution of hydrogen chloride gas (30% m/m) in water and is one of the most widely used chemicals throughout industry. It is used for the manufacture of other chemicals and pharmaceuticals, refining and processing of sugars, synthetic rubber production, leather processing, pickling of metals, scale removing, metallurgical extraction processing and regeneration of cation resins.

Energochemica SE Technical hydrochloric acid is widely used in various industries, by consumers and the general public as an intermediate, pH regulator, flocculant, precipitating and neutralizing agent, for cleaning and washing, as a water treatment chemical, dye, for textile finishing and impregnation, laboratory chemical , for welding and soldering, etc.

Carmeuse Quicklime is often used for its calcium and magnesium value in either a final product or by-product.