Products in Composite Materials: Door Panels

Composite Materials Core Material D also known as 3003Al is an Aluminum honeycomb. It is great for non-aerospace and industrial applications and is a cost-effective lightweight solution.

menzolit® BMC 1400 is a bulk molding compound based on unsaturated polyester resin. The product is glass fiber reinforced and contains mineral fillers. In case of fire the product doesn’t melt, neither does it form droplets nor is smoke generation excessive. The material is injection molded in heated steel molds. It is recommended to work with chrome plated tools. It does not contain any halogens nor any candidates from the REACH SVHC list.

Soric® XF 6 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

menzolit® BMC 3100 is a bulk molding compound based on unsaturated polyester resin. The product is glass fiber reinforced and contains mineral fillers. In case of fire the product doesn’t melt, neither does it form droplets nor is smoke generation excessive. The material is injection molded in heated steel molds. It is recommended to work with chrome plated tools. It does not contain any halogens nor any candidates from the REACH SVHC list.

Thermo-Cor™ FR 10.0 phenolic foam is a rigid, semi-closed celled, foam that comes in a full range of densities from 2.0 pcf to 40.0 pcf.Thermo-Cor FR has a higher compression strength ratio than competing phenolic foams of the same density. Its superior structural strength makes it well suited for stand-alone panels and stress skins used either as thermal or acoustical insulation for commercial applications, especially in hospitals, nursing homes and other public places where low smoke and toxicity are important.

Coremat® XM 3 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process

Thermo-Cor™ FR 15.0 phenolic foam is a rigid, semi-closed celled, foam that comes in a full range of densities from 2.0 pcf to 40.0 pcf.Thermo-Cor FR has a higher compression strength ratio than competing phenolic foams of the same density. Its superior structural strength makes it well suited for stand-alone panels and stress skins used either as thermal or acoustical insulation for commercial applications, especially in hospitals, nursing homes and other public places where low smoke and toxicity are important.

menzolit® HPC 1200 is a sheet molding compound based on unsaturated polyester resin. The product is glass fiber reinforced and contains mineral fillers. In case of fire the product doesn’t melt, neither does it form droplets nor is smoke generation excessive. The material is compression molded in heated steel molds. It is recommended to work with chrome plated tools. The product contains no halogens or heavy metals nor any candidates from the REACH SVHC list

LUMAsite® Sky-SOS has a pale blue “Shoji” effect.

LUMAsite® Parchment-SOS has Gentle “Shoji” effect and high transparent white.

3B Fiberglass EM 1011 is a non-woven mat made from 3B E-CR glass filaments, consisting of chopped fibers randomly and yet evenly orien-tated. The 50 mm length chopped fibers are coated with silane coupling agent and are held together using emulsion binder. CSM is particularly suitable for hand lay-up process using thermoset resin systems to manufacture wide range of products for automobile, recreation, chemical, electrical industries.CSM EM1011 conforms to BS 14118 and IS 11551.

Coremat® Xi 4 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process

menzolit® SMC 0600 is a sheet molding compound based on unsaturated polyester resin. The product is glass fiber reinforced and contains mineral fillers. In case of fire the product doesn’t melt, neither does it form droplets nor is smoke generation excessive. The material is compression molded in heated steel molds. It is recommended to work with chrome plated tools. The product contains no halogens or heavy metals nor any candidates from the REACH SVHC list.

Coremat® Xi 2 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process

Soric® XF 5 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Gillcore® HK is a Kelvar ® aramid fiber reinforced honeycomb which is coated with heat resistant phenolic resin. Kevlar ® honeycomb cores exhibit enhanced performance characteristics over Nomex® honeycomb core in the areas of weight, strength, stiffness and fatigue. Gillcore® HK provides a wide range of honeycomb types, including different cell sizes, cell geometries, paper thicknesses and densities, for commercial, military, aerospace and defense applications.

Soric® XF 1.5 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Soric® LRC 2 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Thermo-Cor™ FR 5.0 phenolic foam is a rigid, semi-closed celled, foam that comes in a full range of densities from 2.0 pcf to 40.0 pcf.Thermo-Cor FR has a higher compression strength ratio than competing phenolic foams of the same density. Its superior structural strength makes it well suited for stand-alone panels and stress skins used either as thermal or acoustical insulation for commercial applications, especially in hospitals, nursing homes and other public places where low smoke and toxicity are important.

3B Fiberglass M8615 is a non-woven mat made out of ECR glass _x005F_x001f_laments, consisting of continuous _x005F_x001f_bres randomly oriented in multiple layers. The glass _x005F_x001f_bre is bonded with a silane cou-pling agent and the layers held together with a suitable binder.The CFM products contain an insolublebinder compatible with both un_x005F_x001f_lled or _x005F_x001f_lled unsaturated polyester, vinyl ester, epoxy and polyurethane resin systems. The M8610 mat is ideally suited for injection molding, RTM and S-RIM processes for molding complex parts. The M8615mat version, with its high rigidity, helps to work with large CFM cuts without loosing _x005F_x001f_bres. The excellent mechanical properties provided by CFM combined with the good electrical properties of the resins make the molded parts attractive for applications like electrical apparatus (high voltage), transportation & automo-tive industries and infrastructuresequipments.

LUMAsite® Crystal II is Near-clear product.

Soric® SF 2 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

LUMAsite® White 1040-POS is Opaque white and pebbled one side product.

Lantor Soric® XF 2 is a flexible honeycomb foam mat used to add structure and thickness to composite laminates. The compression resistant hexagonal cell structure and resin flow channels make Aero-Mat ideal as a core material and infusion medium in one. Unlike standard cell honeycomb, Aero-Mat is very flexible and will conform to compound shapes. The pressure resistant cells create thickness in the laminate without the added weight of extra fabric layers. It is ideally suited for reinforcing curved laminations where additional stiffness is needed.

Coremat® Xi 3 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process

Soric® XF 10 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Coremat® Xi 1 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process

menzolit® SMC 0390 is a sheet molding compound based on unsaturated polyester resin. The product is glass fiber reinforced and contains mineral fillers. In case of fire the product doesn’t melt, neither does it form droplets nor is smoke generation excessive. The material is compression molded in heated steel molds. It is recommended to work with chrome plated tools. It does not contain any halogens nor any candidates from the REACH SVHC list.

Soric® LRC 3 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

LUMAsite® Ivory 02146-SOS is Creamy white and translucent in nature.

Soric® TF 1.5 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

ACP Composites Carbon Fiber High Gloss Woven Sheets are an outstanding decorative laminate with a deep, glossy, three dimensional finish. Our proprietary Autoclave curing process produces the most consistent and highest quality gloss carbon fiber sheets possible. Manufactured using 100% real carbon fiber fabric pre-impregnated with high quality epoxy resin, these sheets are cured at high temperatures and pressure to ensure a strong, rigid product that cannot be re-shaped after cured. Unlike a wet layup, our Autoclave curing process consistently yields flat, lightweight sheets with minimal voids, waves or buildups.

menzolit® BMC 0410 is a bulk molding compound based on unsaturated polyester resin. The product is glass fiber reinforced and contains mineral fillers. In case of fire the product doesn’t melt, neither does it form droplets nor is smoke generation excessive. The material is injection molded in heated steel molds. It is recommended to work with chrome plated tools. It does not contain any halogens nor any candidates from the REACH SVHC list.

LUMAsite® White 2020 is display white and translucent product.

Soric® XF 4 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Thermo-Cor™ FR 2.0 phenolic foam is a rigid, semi-closed celled, foam that comes in a full range of densities from 2.0 pcf to 40.0 pcf.Thermo-Cor FR has a higher compression strength ratio than competing phenolic foams of the same density. Its superior structural strength makes it well suited for stand-alone panels and stress skins used either as thermal or acoustical insulation for commercial applications, especially in hospitals, nursing homes and other public places where low smoke and toxicity are important.