Products in Elastomer Additives: Rigid Films

EverGlide® MB1450 is a polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB450 is a low density polyethylene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB350 is a Linear Low Density Polyethylene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB150 is a Polypropylene Homopolymer (PPH) which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

PERGAPROP BIB-40 PP-G is Di-(2-tert.-butyl-peroxyisopropyl)-benzene 40%, Granules with Polypropylen.PERGAPROP BIB-40 PP-G is used for the production of controlled rheology polypropylene (CR-PP).

PEROXAN C126 is Dimyristyl peroxydicarbonate Flakes.PEROXAN C126 is used for the (co)polymerization of vinylchloride and vinylidenechloride.

The Hanson Group HXA CE 425 is designed as a slow reacting, liquid chain extender for polyurea, polyurethane, and hybrid coatings and elastomer systems. Typical use levels are less than similar to other aliphatic secondary amines available today. This means longer gel times for less money. Try it and see the difference!.

A-Len (Aleko Polymers) ANTIOXIDANT XP10TY is antioxidant masterbatch for polypropylene which prevent soxidative destruction of polypropylene and increase the efficiency of UV-stabilizers.

Everstab LS944 is recommended for various applications which require high light stabilization of polymers including PP. HDPE. ABS. PS. PMMA. SAN. PVC. Nylon. Polyesters. Polyacetal ETC. Main applications are-Polypropylene fibers; Polypropylene tapes; LDPE film; EVA film.

Rosin Chemical(Wuping) Terpene Resin T-90 acts as a tackifier. It is processed from natural turpentine. It doesn't crystallize. It is transparent, neutral, electrically insulating, hydrophobic and non-poisonous. It can resist sparse acid, sparse alkali, heat, light and aging and has excellent viscidity. It dissolves easily in different kinds of synthetic matter such as fragrant hydrocarbon and vegetable oil. It is also an ameliorant of hot melting material. Terpene resin is widely used as industrial material in plastics, rubber, electric cable and packaging.

PERGAPROP HX-20 PP is 2,5-Dimethyl-2,5-di-(tert-butylperoxy)-hexane 20%, Granules with Polypropylen.PERGAPROP HX-20 PP is used for the production of controlled rheology polypropylene (CR-PP).

PERGAQUICK A3 S is N,N-Diethylaniline 10%, Solution in styrene.PERGAQUICK A3 S is used as an accelerator for curing of unsaturated polyester resins at ambient temperature in combination with Dibenzoyl peroxide (PEROXAN BP-types).

Cel-Span® FR 611 is a pelletized antimony and brominated concentrate that meets stringent flammability requirements defined by industry standards. Cel-Span® FR 611 is recommended for electrical sockets, timers, and light fixtures plus other applications where a UL rating is required.

MR-F 7200 is used in appliances, electrics & electronics ,consumer goods ,packaging.

PEROXAN EPC-50 WN-A is Di-(2-ethylhexyl)-peroxydicarbonate 50%, in water and methanol.PEROXAN EPC-50 WN-A is used for the (co)polymerization of vinylchloride and vinylidenechloride.

Everstab 326 is used mainly as UV absorber for PP, PE, PVC, … etc.

ProFLOW 1000 is high flow rate (MFR 1500+) polypropylene resin that quickly melt to low viscosity Newtonian fluids.

PEROXAN MI-60 KPX is Mixture of Methyl isobutyl ketone peroxide and tert-Butyl peroxy benzoate Solution in TXIB.PEROXAN MI-60 KPX is used for the curing of unsaturated polyester resins as such or in presence of a cobalt accelerator in the temperature range of 60° to 120°C.

GRAFTALEN™ EB-PER 15010 is an ethylene-butyl acrylate based additive for polypropylene, designed to increase melt flow of polypropylene and polypropylene compounds. This grade has 10% of the active peroxide component.

Cel-Span® CFA 897 is a 40% active endothermic foaming agent concentrates recommended for extrusion applications for a variety of thermoplastic resins such as polyethylene, polypropylene, styrenics, MPPO and ABS. Cel-Span® CFA 897 is recommended for extrusion, and structural foam molding of polyolefins, polystyrene, MPPO and ABS. This product exhibits a very fine cell structure compared to a typical endothermic foaming agent in extrusion applications.

Polyfill Technologies Antistatic Masterbatch-PT3002 is a surface property modifier, which now-a-days finds extensive use by Plastics Processor, to reduce and control the static charges developed on the surface of plastic parts having large surfaces like film, fibers etc as spark discharge formed by static charges can produce serious accidents. Plastics, particularly sensitive to static build up Polyolefins, Nylon, Polyesters, Urethanes, Cellulosics, Acrylics etc. Antistatic Masterbatch-PT3002 is based on Ethoxy Amine, using LLDPE as a carrier resin, compounded in most modern extrusion equipment, using state of art technology.

Gaia® Antimicrobial AB 504 is an organic concentrate produced from citrus extracts that control or retard the growth of bacteria, fungus, and algae in plastic rotational molded parts. Gaia® Antimicrobial AB 504 is a powerful additive concentrate produced in an LLDPE carrier resin for ease of dispersion. Gaia® Antimicrobial AB 504 is used in the inner core of the rotationally molded structures. This product is used especially in molded polyethylene water tanks used throughout Latin America

Cel-Span® S 100 is a compounded additive for color stabilization and dispersion. A unique proprietary compounding technique makes it possible to pelletize the entire active stabilizer and dispersant in the formulation without adding additional heat history. Cel-Span® S 100 should be utilized at 0.25% to 1% consistently during the color concentration manufacturing processes for stabilization and dispersion. Cel-Span® S 100 also lessens degradation of pigments and enhances the brightness of color concentrates. The pigment is initially dispersed by dispersing agents in order to prevent the formation of uncontrolled flocculates; a process of contact and adhesion whereby the particles of dispersion form larger-size clusters. Stability of dispersion is a result of interplay of the heat (kinetic) energy of particles, attractive inter-particle forces, and repulsive forces; this also helps to limit short-range Van der Waals forces.

PEROXAN LP is Dilauroyl peroxide 98%, Flakes.PEROXAN LP is used for the (co)polymerization of vinylchloride, vinylidenchloride, acrylates and methacrylates.

Makrostab® UV 1022/1019 are stabilizer masterbatches used for increasing the UV stability of polymer. Their application is recommended in all cases where the basic stabilization from the resin producer is insufficient for a given application. The MAKROSTAB® masterbatches represent a simple and efficient solution to the additional stabilization of polymer at its last stage of conversion. They are successfully used in all processing technologies, e.g. injection and blow molding, tape extrusion or fiber production.

Benefos 1626 (26741-53-7)is a phosphite type antioxidant of high phosphorous content. This secondary antioxidant provides excellent heat stability and reduction in polymer degradation during processing. Benefos 1626 has good synergism when used with light stabilizers such as benzophenones and benzotriazoles.

BNX 2777 (40601-76-1 & 31570-04-4)is a primary and secondary antioxidant blend using an phenolic antioxidant (BNX 1790) and a phosphite type antioxidant (Benefos 1680). The primary antioxidant provides superior polymer stabilization and has excellent compatibility with polymeric HALS’s and UVA’s. The secondary antioxidant provides excellent heat stability and antioxidation, with good compatibility with resins and excellent extraction resistance.

Makrostab® UV 0724/1323 are stabilizer masterbatches used for increasing the UV stability of polymer. Their application is recommended in all cases where the basic stabilization from the resin producer is insufficient for a given application. The MAKROSTAB® masterbatches represent a simple and efficient solution to the additional stabilization of polymer at its last stage of conversion. They are successfully used in all processing technologies, e.g. injection and blow molding, tape extrusion or fiber production.

BNX 549 (123968-25-2)is a multifunctional antioxidant for the stabilization of plastics and elastomers. Unlike conventional phenolic antioxidants, BNX 549 is effective to scavenge alkyl (carbon-centered) radicals. The product is particularly active under demanding processing conditions (high temperature, high shear) and under anaerobic conditions.

Cel-Span® Process Aid 101 is a 100% active (powder or pellet) internal lubricant processing aid with anti-static properties that are incorporated into the resin. Cel-Span® Process Aid 101 eliminates the need for an external mold release agent and improves resin flow, dispersion, resin additives ex:(reinforcements, fillers, and pigments), and reduces cycle time. The use of Cel-Span® Process Aid 101 will not have an adverse effect on the physical properties. Compatible with Polyethylene, Polystyrene, and Polypropylene.

PEROXAN PO-50 P is tert-Butyl peroxy-2-ethylhexanoate 50%, Powder with chalk.PEROXAN PO-50 P is used for the curing of unsaturated polyester resins.

Cel-Span® Process Aid 333 is a compounded product intended for clear films containing a high level of thermal stabilizers to provide protection of film resins during high temperature extrusion and lamination processes, thus maximizing inherent the natural resins. Cel-Span® Process Aid 333 eliminates build up in both internal and external metal surfaces of the extrusion die, as well as reduction of wrinkles in thin gage films.

PEROXAN DDP is Didecanoyl peroxide 98%, Flakes.PEROXAN DDP is used for the (co)polymerization of ethylene, vinylchloride, vinylidenchloride, acrylates and methacrylates.

PEROXAN BP-Pulver 20 is Dibenzoylperoxide 20%, Powder with gypsum.PEROXAN BP-Pulver 20 is used for the curing of unsaturated polyester resins at ambient and elevated temperatures.

PEROXAN ME-50 LS-PX is Methyl ethyl ketone peroxide Solution in TXIB.PEROXAN ME-50 LS-PX is used for the curing of unsaturated polyester at ambient temperature in combination with cobalt accelerators.