Products in Base Stocks & Oils: Low Temperature Performance

TRIEST TMCC-4011, is a viscous ester formed by the reaction of trimethylol propane and biobased caprylic capric acid, which provides superior performance properties at both high and low temperatures and has high thermal stability and lubricity. It has applications in many fields like chain and compressor oils, motor oils and also in metal working fluids

TRIEST TMCC-0211, is a thermally stable and highly lubricating ester formed by the reaction of trimethylol propane and caprylic capric acid, a biobased fatty acid, which provides superior performance properties at both high and low temperatures. It has applications in many areas like metal working fluids, motor oils, chain and compressor oils.

LEXOLUBE POE-22 is a polyol ester, designed to provide excellent oxidative stability and wide operating temperature range. It is optimum for applications requiring high temperature stability and low deposit formation, including aviation turbine engine bearing lubricants.

LUBRICIT TMP C810 is a polyol ester that provides lubricity, detergency, and additive compatibility in a wide range of applications. This product is useful in applications where good oxidative stability, low temperature fluidity, and high bioderived content are required. The product has achieved the HX-1 designation by NSF International, qualifying it as a lubricant basestock for incidental food contact.

LEXOLUBE FG-12 HX1 is a diester fluid listed by NSF International as a base stock approved for incidental food contact under FDA 21 CFR 178.3570. It has low viscosity, good oxidative stability and exceptional low temperature flow properties, making it an excellent choice for extreme cold applications (freezer tunnels, ice cream manufacturing and frozen food processing).

LEXOLUBE FG-8 HX1 is a diester fluid listed by NSF International as a base stock approved for incidental food contact under FDA 21 CFR 178.3570. It has low viscosity, good oxidative stability and exceptional low temperature flow properties, making it an excellent choice for extreme cold applications (freezer tunnels, ice cream manufacturing and frozen food processing).

LEXOLUBE POE-32 is a proprietary polyol ester composition, designed to provide excellent oxidative stability and wide operating temperature range. It is optimum for applications requiring high temperature stability and low deposit formation, including aviation turbine engine bearing lubricants.

LUBRICIT TMP C9 is a low viscosity polyol ester that is used as a synthetic base oil for formulations requiring wide temperature operating range, low volatility and good oxidative stability. The product has achieved the HX-1 designation by NSF International, qualifying it as a lubricant basestock for incidental food contact.

LUBRICIT PE 510/1 is a low viscosity polyol ester that is used as a synthetic base oil for formulations requiring wide temperature operating range, low volatility and good oxidative stability.

LEXOLUBE 2I-214 is an NPG polyol diester that provides lubricity, detergency, and additive compatibility in a wide range of applications. This product is optimal in terms of oxidation, and is useful as a base oil and additive for most applications requiring high temperature stability such as compressor/gear oils, hydraulic fluids, grease formulations, as well as 2 and 4 stroke oils.

LUBRICIT DOA is an adipate diester fluid that is used as a synthetic base oil for formulations requireing outstanding low temperature flow properties. Adipate diesters are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT 2-EH iC9 is a medium chain fatty acid ester with exceptional low temperature properties. The highly branched structure that is well suited for use in grease or water-based metalworking fluids as a base stock or additive component.

LUBRICIT DOS is an sebacate diester fluid that is used as a synthetic base oil for formulations requiring exceptional low temperature flow properties. Sebacate diesters are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT DIOA is an adipate diester fluid that is used as a synthetic base oil for formulations requiring exceptional low temperature flow properties, such as compressors and grease. Adipate diesters are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT 2-EHAZ is an azelate diester fluid that is used as a synthetic base oil for formulations requiring exceptional low temperature flow properties. Azelate diesters are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT 9547 is a pentaerythritol ester that provides lubricity, detergency, and additive compatibility in a wide range of applications. It is optimal in terms of oxidation, and offers exceptional low temperature flow properties.

LEXOLUBE 3I-310 is a polyol ester that provides lubricity, detergency, and additive compatibility in a wide range of applications. This product is optimal in terms of oxidation, and is useful as a base oil and additive for most applications requiring high temperature stability such as compressor/gear oils, hydraulic fluids, grease formulations, as well as 2 and 4 stroke oils.

LEXOLUBE 3Q-310 is a polyol ester that provides lubricity, detergency, and additive compatibility in a wide range of applications. This product is optimal in terms of oxidation and low temperatue fluidity, and is useful as a base oil and additive for most applications requiring high temperature stability such as compressor/gear oils, hydraulic fluids, grease formulations, as well as 2 and 4 stroke oils.

LEXOLUBE iC9-9 is a patented, hydrolytically stable ester with exceptional low temperture performance that is well suited for use in grease or water-based metalworking fluids as a base stock or additive component.

LUBRICIT DTDA/1 is an adipate diester fluid that is used as a synthetic base oil for formulations requiring outstanding low temperature flow properties. Adipate diesters are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT DIDA is an adipate diester fluid that is used as a synthetic base oil for formulations requiring exceptional low temperature flow properties. Adipate diesters are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT NG710 is an NPG polyol ester that provides lubricity, detergency, and additive compatibility in a wide range of applications. This product is useful in applications where good oxidative stability, low temperature fluidity, and high bioderived content are required.

LUBRICIT DTDA is an adipate diester fluid that is used as a synthetic base oil for formulations requiring outstanding low temperature flow properties. Adipate diesters are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT DIDS is a sebacate diester fluid that is used as a synthetic base oil for formulations requiring exceptional low temperature flow properties. Sebacate diesters are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

CalEster™ T is NSF HX-1 registered as suitable for use in food manufacturing industry. CalEster™ T is suitable for a broad range of lubricant applications where low viscosity, wide temperature capability, and biodegradability are desired, including automotive engine oils, environmental lubricants, air compressor oils, transmission fluids, turbine oils, hydraulic fluids, and wide temperature grease. CalEster™ T also makes an excellent correction fluid for low polarity base oils like PAO and GTL. CalEster™ Synthetic Polyol Esters Calumet Specialty Products Partners, L.P. Offers a complete line of high purity synthetic polyol esters for use in high performance lubricant applications. With over 50 years of experience in manufacturing synthetic polyol esters, Calumet’s lubricant grade esters are engineered to deliver the highest performance under the most demanding conditions.

CalEster™ 68 S is an ISO 68 pure polyol ester made from mono-pentaerythritols and saturated fatty acids for maximum stability. CalEster™ Synthetic Polyol Ester Calumet Specialty Products Partners, L.P. Offers a complete line of high purity Synthetic Polyol Ester for use in high performance lubricant applications. With over 50 years of experience in manufacturing Synthetic Polyol Ester, Calumet’s lubricant grade esters are engineered to deliver the highest performance under the most demanding conditions.

CalEster™ F is a higher viscosity polyol ester made from dipentaerythritol and saturated fatty acids for maximum stability. CalEster™ Synthetic Polyol Ester Calumet Specialty Products Partners, L.P. Offers a complete line of high purity Synthetic Polyol Ester for use in high performance lubricant applications. With over 50 years of experience in manufacturing Synthetic Polyol Ester, Calumet’s lubricant grade esters are engineered to deliver the highest performance under the most demanding conditions.

CalEster™ Synthetic Polyol Esters Calumet Specialty Products Partners, L.P. Offers a complete line of high purity synthetic polyol esters for use in high performance lubricant applications. With over 50 years of experience in manufacturing synthetic polyol esters, Calumet’s lubricant grade esters are engineered to deliver the highest performance under the most demanding conditions.

CalEster™ A is a low viscosity, highly stable polyol ester made from pentaerythritol and saturated fatty acids. CalEster™ Synthetic Polyol Ester Calumet Specialty Products Partners, L.P. Offers a complete line of high purity Synthetic Polyol Ester for use in high performance lubricant applications. With over 50 years of experience in manufacturing Synthetic Polyol Ester, Calumet’s lubricant grade esters are engineered to deliver the highest performance under the most demanding conditions.

CalEster™ 32 Pro is an ISO 32 pure polyol ester made from pentaerythritol with saturated fatty acids for maximum stability. CalEster™ Synthetic Polyol Ester Calumet Specialty Products Partners, L.P. Offers a complete line of high purity Synthetic Polyol Ester for use in high performance lubricant applications. With over 50 years of experience in manufacturing Synthetic Polyol Ester, Calumet’s lubricant grade esters are engineered to deliver the highest performance under the most demanding conditions.

CalEster™ 22 Pro is an ISO 32 pure polyol ester made from pentaerythritol with saturated fatty acids for maximum stability. CalEster™ Synthetic Polyol Ester Calumet Specialty Products Partners, L.P. Offers a complete line of high purity Synthetic Polyol Ester for use in high performance lubricant applications. With over 50 years of experience in manufacturing Synthetic Polyol Ester, Calumet’s lubricant grade esters are engineered to deliver the highest performance under the most demanding conditions.

CalEster™ MW is suitable for a broad range of lubricant applications where a combination of lower viscosity and wide operating temperature capability are desired including turbine oils, engine oils, air compressor oils, hydraulic fluids, and refrigeration lubricants. CalEster™ Synthetic Polyol Esters Calumet Specialty Products Partners, L.P. Offers a complete line of high purity synthetic polyol esters for use in high performance lubricant applications. With over 50 years of experience in manufacturing synthetic polyol esters, Calumet’s lubricant grade esters are engineered to deliver the highest performance under the most demanding conditions.

CalEster™ TS is suitable for a broad range of lubricant applications where a wide operating temperature capability is desired including turbine oils, gear oils, engine oils, air compressor oils, and hydraulic fluids. CalEster™ Synthetic Polyol Esters Calumet Specialty Products Partners, L.P. Offers a complete line of high purity synthetic polyol esters for use in high performance lubricant applications. With over 50 years of experience in manufacturing synthetic polyol esters, Calumet’s lubricant grade esters are engineered to deliver the highest performance under the most demanding conditions.

CalEster™ HT 125 is a high viscosity pure polyol ester made from dipentaerythritol with saturated fatty acids for maximum stability. CalEster™ Synthetic Polyol Ester Calumet Specialty Products Partners, L.P. Offers a complete line of high purity Synthetic Polyol Ester for use in high performance lubricant applications. With over 50 years of experience in manufacturing Synthetic Polyol Ester, Calumet’s lubricant grade esters are engineered to deliver the highest performance under the most demanding conditions.

CalEster™ N is suitable for a broad range of lubricant applications where a combination of lower viscosity and a wide operating temperature capability are desired including turbine oils, engine oils, air compressor oils, hydraulic fluids, and refrigeration lubricants. CalEster™ Synthetic Polyol Esters Calumet Specialty Products Partners, L.P. Offers a complete line of high purity synthetic polyol esters for use in high performance lubricant applications. With over 50 years of experience in manufacturing synthetic polyol esters, Calumet’s lubricant grade esters are engineered to deliver the highest performance under the most demanding conditions.

CALPAR™ 4GIII is a high quality, very high viscosity index (VHVI) oil engineered to meet the API requirements for Group III base stock. Calpar 4GIII base stock is designed for today’s formulating challenges in automotive and industrial lubricant applications including engine oils, transmission and driveline fluids.