Products in Fluids & Lubricants: Anti-Wear Agent

STEPAN® MWA-540 is a glyceryl monooleate that can be used as an emulsifier for metalworking formulations for improved lubrication properties. The film formed by STEPAN® MWA-540 has excellent load-carrying ability, as shown by falex 4-ball and falex pin and vee testing. It also shows improved lubrication by showing a reduced average scar when compared to the current industry standard.

STEPAN® MWA-551 is a pentaerythritol tetra c8-10 that can be used for metalworking formulations in synthetic and semi-synthetic lubricants in high-temperature applications and for improved lubrication properties. It can act as a stand-alone chlorinated paraffin replacement or be combined with phosphate esters to offer further enhancement. It shows improved lubrication by showing a reduced average scar when compared to the current industry standard.

STEPAN® MWA-553 is a fatty acid ester utilized in metalworking formulations for synthetic and semi-synthetic lubricants in high-temperature settings. It can function as a standalone chlorinated paraffin replacement or be combined with phosphate esters for enhanced lubrication properties. Its benefits include improved lubrication, a reduced average scar compared to industry standards, and higher failure loads.

STEPAN® MWA-560 HS is a diethylene glycol-phthalic anhydride-based modified polyester polyol that can exhibit hydrolysis resistance and good thermal stability. It can also exhibit a good hardness/flexibility balance, clarity, and low color. It can be used in metalworking formulations for improved lubrication properties. It shows improved lubrication by showing a reduced average scar when compared to the current industry standard.

STEPAN® MWA-550 is a trimethylolpropane tricaprylate caprate polyol ester that can be used for metalworking formulations in 100% synthetic lubricants for improved lubrication properties, cutting fluids, and drawing compounds. It can enhance the performance of straight oil, semi-synthetic, and full synthetic metalworking fluids. It can also offer extreme pressure-type performance without reacting at the work-tool interface. It shows improved lubrication by showing a reduced average scar when compared to the current industry standard.

STEPAN® MWA-501 is a methyl ester that can be used as either a solvent or a cosolvent in metalworking, die casting, and metal forming processes. It provides excellent film-forming properties and lubricity in straight oil, semi-synthetic, and full synthetic metalworking fluids. It is a non-staining product and has shown excellent results in metal-forming fluids as well as metal removal operations.

STEPAN® MWA-503 is a soy methyl ester that can be used as either solvents or cosolvents in metalworking, die casting, and metal forming processes. It can offer great film-forming properties. Straight oils, semi-synthetics, and full synthetic fluids can all achieve enhanced lubricity performance without staining ferrous and non-ferrous metals.

STEPAN® MWA-502 can be used as either a solvent or cosolvent in metalworking, die casting, and metal forming processes. It combines excellent characteristics of cleanliness, low odor, high flash point, and good film-forming properties. It can be used as a non-staining additive for metal forming or metal removal operations on ferrous and non-ferrous metals.

STEPAN® MWA-251 is a 100% active nonionic surfactant used as a wetting agent and for co-emulsification of difficult-to-solubilize components. It can be used as an emulsifier and coupling agent for metalworking formulations. It can enable improved performance in metal cleaning in metalworking applications and enhance lubricity in metalworking applications. It shows improved lubrication by showing a reduced average scar when compared to the current industry standard.

STEPAN® MWA-310 is a phosphate ester and can be used as an emulsifier and extreme pressure agent in synthetic and semi-synthetic metalworking fluids. It can be used as a component of lubricants, gear and chain oils, metalworking fluids, hydraulic fluids, and plasticizers. It is soluble in water and slightly soluble in oil, yielding very low surface tension and cmc values. It can improve corrosion inhibition and also provide protection for aluminum.

STEPAN® MWA-570 HS is a diethylene glycol-phthalic anhydride-based modified polyester polyol that exhibits hydrolysis resistance and good thermal stability. It exhibits a good hardness/flexibility balance, clarity, and low color. It is used in metalworking formulations for improved lubrication properties and is a great option as a chlorinated paraffin replacement, either alone or with the addition of phosphate esters. It also shows improved lubrication by showing a reduced average scar when compared to the current industry standard.

T-Mulz® 565 is a blended anionic surfactant that is designed primarily for use in emulsifier systems for agricultural and industrial formulations. The chemical properties of this product are similar to T-Mulz® 598, except that it is more hydrophilic. It is compatible with both anionic and nonionic surfactants.

T-Mulz® 844 M is a phosphate ester designed for use in alkaline cleaners, yarn lubricants, and wet processing. It demonstrates excellent salt tolerance, especially under alkaline conditions. This product also functions well as a hydrotrope and can couple solvent, electrolyte, and surfactant mixtures. Additional benefits of using T-Mulz® 844 M include improved wetting and detergency. This product also finds application as a primary emulsion polymerization surfactant and is well suited to acrylic latexes.

T-Mulz® 844 is a phosphate ester designed for use in alkaline cleaners, textiles in yarn lubricants, and wet processing. This product is used in concentrated electrolyte solutions to improve salt tolerance and as a hydrotrope that provides detergency, wetting, and coupling properties.

T-Mulz® 66H is the potassium salt of an aromatic phosphate ester. It exhibits good solubility in highly alkaline liquid formulations and functions as an efficient hydrotrope for coupling nonionic surfactants into alkaline systems while simultaneously adding detergency and wetting properties. This product is recommended for use in heavy-duty liquid detergents, all-purpose hard surface cleaners, dry cleaning fluids, agricultural formulations, and textile products.

T-Mulz® P-4LF is a phosphate ester designed for use in alkaline cleaners and hard surface detergents. This product is excellent for metal cleaner formulations due to its low foaming characteristic. This clear, yellow, viscous liquid has a surface tension (0.05% aqueous) of 70 dynes/cm.

T-Mulz® BP-PE is the phosphate ester of a block polymer. It is a low-foaming surfactant that has a cloud point slightly above room temperature. This phosphate ester surfactant can be used in formulations for the metal cleaning and metalworking industries.

T-Mulz® 734-2 is a blended anionic surfactant designed primarily for making emulsifier systems for agricultural and industrial formulations. This product is an excellent emulsifier for a wide range of solvents. It is particularly good as a solvent emulsifier when hard water is the main problem.

T-Mulz® A 181-4.5 PE is a complex organic phosphate ester that is compatible with anionic and nonionic surfactants. It is highly effective as a lubricant, wetting agent, corrosion inhibitor, dispersant or emulsifier and is often used in lubrication oils, polishing fluids and cutting fluids.

T-Mulz® 596 is a complex, ester-free organic phosphate acid that is recommended for use in areas of emulsion polymerization. This product is compatible with anionic and nonionic surfactants but should not be mixed with concentrated oxidizing or reducing agents, as the mixture of these compounds with organic compounds forms a potentially explosive mixture.

T-Mulz® Z 900 is a modified aliphatic amine and a clear to light yellow-colored, low-viscosity epoxy curing additive. The incorporation of T-Mulz® Z 900 into epoxy systems allows for less critical mix ratios and excellent solvent resistance. It can be used across a wide range of applications, including tooling compounds, laminates, automotive body patching compounds, and metal and plastic adhesives.

T-Mulz® A 136 PE is an APE-free anionic surfactant that is primarily used for acrylic, styrene/acrylic, and vinyl/acrylic latexes in emulsion polymerization. It can be used as a primary surfactant or as a post-additional surfactant to improve gloss retention. This product also provides particle size control, corrosion inhibition, and improved adhesion.

T-Mulz® 786-1 is a phosphate ester that is designed primarily for making emulsifier systems for metal processing, solvent cleaners, and dry cleaning. This non-hazardous surfactant has good dispersion properties and good solubility. It is soluble in perchloroethylene, xylene, ethanol, and kerosene and is readily dispersible in water.

T-Mulz® 565-2 is a blended anionic surfactant designed primarily for making emulsifier systems for agricultural, latex, and industrial formulations. It provides coupling ability, emulsification power, and rapid wetting to the formulation. As supplied, it is a free acid and will react readily with basic compounds.

Armolube® FM 103 friction modifier is used as an intermediate to make friction modifiers for Dual Clutch Transmission Fluids (DCT), Automatic Transmission Fluids (ATC), and anti-wear components.

Armolube® AW 101 anti-wear agent provides good ashless anti-wear performance, acting as a good corrosion inhibitor for iron (Fe) and aluminum (Al). It is a reasonably good emulsifier with improved solubility benefits in emulsion for less-sticky soaps.

Armolube® AW 102 anti-wear agent offers excellent ashless anti-wear performance and all-around corrosion inhibition for iron (Fe) and aluminum (Al) and is a reasonably good anion emulsifier with low foaming characteristics.

Naxonac® 817LF is an anionic surfactant designed to meet your needs as an emulsifier, wetting agent, anti-wear additive, corrosion inhibitor, and extreme pressure (EP) additive in lubricants and various metalworking fluids. It also has a unique property as a low-foam metalworking fluid additive.

Naxonac® 184 is an anionic surfactant designed to meet multiple needs in metalworking fluids. It serves as an emulsifier, wetting agent, anti-wear additive, corrosion inhibitor, and lubricant. Its stability and solubility in alkali systems are some of the main advantages of phosphate esters. It can also be used as a hydrotrope to couple nonionic surfactant systems that are not soluble, while at the same time increasing wetting and detergency properties. With these features, Naxonac® 184 is an excellent choice for metalworking applications.

TRIEST EHPH-2111, is a water-soluble, anti-corrosion ester formed by the reaction of ethylhexyl alcohol with mono- and di-phosphoric acid, used as a viscosity control agent, especially in polymers and coatings. It's applications lies in many fields like polymer industry, coatings, textile auxiliary chemicals, cleaning products.

Desilube 77 is an ecofriendly high performance anti-wear, anti-friction, extreme pressure lubricant additive.

Desilube 99FEL is an ecofriendly high performance anti-wear, anti-friction, extreme pressure lubricant additive.

Desilube AEP is a novel lignin-based extreme pressure additive. It is naturally occurring, non-toxic and biodegradable, making it the ideal choice of additive for ECO GREEN lubricant and grease applications.

Desilube 99L is an ecofriendly high performance anti-wear, anti-friction, extreme pressure lubricant additive.

Desilube 98F is an ecofriendly high performance anti-wear, anti-friction, extreme pressure lubricant additive.

Desilube 88 is an ecofriendly high performance anti-wear, anti-friction, extreme pressure lubricant additive.