Products in Water Treatment Chemicals: Groundwater Treatment

USALCO Sodium Aluminate (Granular) is a white powder that easily dissolves in water and is the dry form of sodium aluminate. It is produced by mixing alumina trihydrate with sodium hydroxide to create a solution, which is then solidified by removing excess moisture. This product does not contain any stabilizing agents.

USALCO Sodium Aluminate Solution (38%) is an economical source of highly reactive alumina manufactured by dissolving alumina tri‐hydrate (ATH) into sodium hydroxide and water. USALCO 38 is also stabilized to prevent alumina from precipitating. The use of only stringently selected raw materials and state‐of‐the‐art manufacturing practices ensures that USALCO 38 is of the highest quality. USALCO 38 meets the specifications of the American Water Works Association Standard B405‐16 and complies with the requirements of NSF/ANSI/CAN 60: Drinking Water Treatment Chemicals ‐Health Effects at a maximum dosage of 105 mg/L.

USALCO Sodium Aluminate Solution (45%) is an economical source of highly reactive alumina manufactured by dissolving alumina tri‐hydrate (ATH) into sodium hydroxide and water. USALCO 45 is also stabilized to prevent alumina from precipitating. The use of only stringently selected raw materials and state‐of‐the‐art manufacturing practices ensures that USALCO 45 is of the highest quality. USALCO 45 meets the specifications of the American Water Works Association Standard B405‐16 and complies with the requirements of NSF/ANSI/CAN 60: Drinking Water Treatment Chemicals ‐Health Effects at a maximum dosage of 89 mg/L.

Tramfloc® 903 is a liquid organic compound formulated to serve as a precipitant for the removal of heavy metals from process wastewaters, ground waters, and other polar solvents; and detoxifier stabilizer for the detoxification and stabilization of heavy metals in contaminated soils, sludges, ashes, sediments and other solids.

Dyna-Aqua™ Uranium is an effective, hybrid, alumina based metal oxide designed specifically for heavy metal removal from water and wastewater. Dyna-Aqua™ Uranium is a metal oxide composite with an effective size of greater than 600 microns, offered as either granular or spherical granules. Because of its tailored design it exhibits high selectivity in the presence of competing ions with good kinetics over a broad operating range. Dyna-Aqua™ Uranium can be easily retrofitted into conventional water treatment equipment or vessels.

Compass Remediation Chemicals Potassium Permanganate is a chemical oxidant used in soil and groundwater remediation to treat contaminants such as chlorinated solvents (TCE, PCE, etc.). The active oxidant is the permanganate anion (MnO₄-), which is a strong oxidant which can persist and react with COCs several months after injections are complete. In Situ Chemical Oxidation (ISCO) using potassium permanganate is a proven and cost-effective treatment when used to treat DNAPL source zones or zones of high residual contamination.

FILTRASORB® 816 is a granular activated carbon developed by Calgon Carbon Corporation for the removal of dissolved organic compounds from water and wastewater as well as industrial and food processing streams. These contaminants include taste and odor compounds, organic color, total organic carbon (TOC), and industrial organic compounds such as TCE and PCE.

TIGG ANI is a high capacity anion resin usually supplied in a chloride form and is used in all types of deionization systems and chemical processing applications. TIGG ANI has capacity subject to influent water chemistry and may be used on a oncethrough basis to polish metals. Knowledge of operating conditions such as pH, dissolved solids, alkalinity, hardness, etc. is beneficial.

FILTRASORB® 300 is a granular activated carbon for the removal of dissolved organic compounds from water and wastewater as well as industrial and food processing streams. These contaminants include taste and odor compounds, organic color, total organic carbon (TOC), and industrial organic compounds such as TCE and PCE.

ResinTech® CG8 is a strong acid cation resin in sodium form. It is amber in color and made from 8% cross-linked gel. It is a workhorse cation resin optimized for commercial/industrial and residential softening applications that require good regeneration efficiency and oxidative stability. CG8 is intended for use in all commercial and industrial applications including both softening and demineralization.

ResinTech® CG8-HP is a high purity strong acid cation resin in sodium form. It is amber in color and made from a 10% cross-linked gel. The HP (high purity) designation means it is Gold Seal Certified by the WQA for use in potable water applications. CG8-HP is intended for softening and other salt form applications that require potable water certification.

ResinTech® CNS-F is a fine mesh, non-solvent, strong acid cation resin in sodium form. It is Black in color and made from standard cross-linked gel. CNS-F is Gold Seal Certified by the WQA for potable water applications. CNS-F is intended for residential softening applications with high levels of iron in the feedwater, that do not contain significant chlorine residual, and where resin bed depth is less than ideal.

FILTRASORB® 300M is a granular activated carbon (GAC) developed by Calgon Carbon Corporation for the removal of contaminants from municipal drinking water. These contaminants include taste and odor compounds such as MIB and Geosmin, organic compounds known to be precursors to disinfection byproduct (DBP) formation, DBP compounds such as haloacetic acids and trihalomethanes, contaminants of emerging concern (CECs), such as endocrine disrupting compounds (EDCs) and pharmaceutical and personal care products (PPCPs), and other targeted organic contaminants.

VERSAFRAC DFR-200 is an anionic dry friction reducer used in fresh water to mid brines.

ResinTech® CG8-BL is a dark-colored strong acid cation resin in sodium form made from a 8% cross-linked gel. CG8-BL has the same physical characteristics, regeneration efficiency, and oxidative stability as other resins in the CG8 family. CG8-BL is intended for use in all industrial applications including both softening and demineralization and is recommended for mixed beds where its dark color distinguishes it from amber-colored anion resins.

ResinTech® CG8-F-HP is a high purity fine mesh strong acid cation resin in sodium form. It is amber in color and made with an 8% cross-linked gel. The HP (high purity) designation means it is Gold Seal Certified by the WQA for use in potable water applications. CG8-F-HP is intended for potable water softening applications that have high levels of iron in the feedwater and where resin bed depth is less than ideal.

RCKSLIQ VFR-52 is an anionic viscoelastic friction reducer used in source water from fresh up to mid brine and particularly in water with higher sulfates in the composition.

Aldex C-800F Fine Mesh Water Softening Resin Sodium Form is a high-quality, gel-type, high-capacity fine mesh cation resin that can be used in a wide range of domestic and industrial water softening applications. The surface area per square foot of Aldex C-800F resin is far greater than that of typical water softening resin. As a result, faster kinetics and more ion exchange capacity per regeneration are achieved while using the same amount of salt.

Rockwater Energy FRAQSLIQ PFR-308 is an anionic friction reducer used in source water from fresh up to high brine. Provides high performance at lower loadings in some applications. A versatile formula can replace up to three products and reduce inventory carrying costs.

Purolite® C100 is a polystyrenic gel and a strong acid cation resin in sodium form.

ResinTech® CNS is a solvent free premium grade dark colored sodium form strong acid cation resin made by ResinTech in Camden, NJ. CNS is Gold Seal Certified by the WQA for potable water applications. CNS is intended for residential water softening of waters that do not contain significant chlorine residual and where potable water certification is required.

Aldex C-800x10 Water Softening Resin Sodium Form is a high capacity, high quality gel-type cation resin that can meet the most stringent requirements of household, farm, commercial, institutional, and industrial water softeners. It is available in 1 cubic foot bags and larger bulk packages in sodium form as black colored beads.

Puropack® PPC100 is a polystyrenic gel and a strong acid cation resin in sodium form.

FILTRASORB® 400M is a granular activated carbon (GAC) developed by Calgon Carbon Corporation for the removal of contaminants from municipal drinking water. These contaminants include taste and odor compounds such as MIB and Geosmin, organic compounds known to be precursors to disinfection byproduct (DBP) formation, DBP compounds such as haloacetic acids and trihalomethanes, contaminants of emerging concern (CECs), such as endocrine disrupting compounds (EDCs) and pharmaceutical and personal care products (PPCPs), and other targeted organic contaminants.

Aldex C-800 Water Softening Resin Sodium Form is a high-capacity, high-quality gel-type cation resin that can meet the most stringent requirements of household, farm, commercial, institutional, and industrial water softeners. It is available in 1 cubic foot bags and larger bulk packages in sodium form as black colored translucent beads.

Aldex C-800 UPS Water Softening Resin Sodium Form is a high capacity, high quality gel-type cation resin that can meet the most stringent requirements of household, farm, commercial, institutional, and industrial water softeners. It is available in 1 cubic foot bags and larger bulk packages in sodium form as black colored beads.

FILTRASORB® 400 is a granular activated carbon for the removal of dissolved organic compounds from water and wastewater as well as industrial and food processing streams. These contaminants include taste and odor compounds, organic color, total organic carbon (TOC), industrial organic compounds such as TCE and PCE, and PFAS.

ResinTech® CGS is a residential grade strong acid cation resin in sodium form. It is amber in color and made from standard cross-linked gel. CGS is Gold Seal Certified by the WQA for potable water applications. It is optimized for regeneration efficiency and high capacity. CGS is intended for residential water softening of waters that do not contain significant chlorine residual and where potable water certification is required.

ResinTech® CN8 is a solvent free premium grade dark colored sodium form 8% crosslinked gel strong acid cation resin made by ResinTech in Camden, NJ. It is a workhorse cation resin optimized for commercial, industrial, and residential softening applications. CN8 is Gold Seal Certified by the WQA for potable water applications. It is intended for both potable water and industrial uses.

VERSAFRAC DFR-300 is an anionic dry friction reducer used in fresh water to mid brines.

Aldex C-700 Water Softening Resin Sodium Form is a high capacity, high quality gel-type cation resin that can meet the most stringent requirements of household, farm, commercial, institutional, and industrial water softeners. It is available in sodium form as black colored beads in 1 cubic foot bags and larger bulk packages.

CENTAUR® C 12x40 is a coconut based alternative to our premium CENTAUR 12x40 product. This liquid phase virgin activated carbon product is not impregnated with metals or alkali yet displays the catalytic functionality of these materials. The product is unique in that it concentrates reactants via adsorption and then promotes their reaction on the surface of the pores. In most cases CENTAUR-C 12x40 can be reactivated and does not present the disposal concerns associated with impregnated carbons.

Prime Basic Chemicals PN-01 is a nitrate removing chemical used for portable water and underground wells water.

Aster Bio AB Petrozyme is developed for use in remediation of petroleum hydrocarbons including crude oil, fuels, and BTEX. Suitable for use in soil, groundwater, and wastewater treatment systems.

FILTRASORB® 820 is a granular activated carbon developed by Calgon Carbon Corporation for the removal of dissolved organic compounds from water and wastewater as well as industrial and food processing streams. These contaminants include taste and odor compounds, organic color, total organic carbon (TOC), and industrial organic compounds such as TCE and PCE.

FILTRASORB® 200M is a granular activated carbon (GAC) developed by Calgon Carbon Corporation for the removal of contaminants from municipal drinking water. These contaminants include taste and odor compounds such as MIB and Geosmin, organic compounds known to be precursors to disinfection byproduct (DBP) formation, DBP compounds such as haloacetic acids and trihalomethanes, contaminants of emerging concern (CECs), such as endocrine disrupting compounds (EDCs) and pharmaceutical and personal care products (PPCPs), and other targeted organic contaminants.