Products in Performance Additives

POLYSORB® PA is a high purity grade of isosorbide grade under pellets form (POLYSORB® PA). It offers valuable solutions to performance materials markets: polyesters, composites and coatings, polyurethanes, etc.   Key benefits Temperature resistance Optical properties Surface hardness

Ethylene dichloride (EDC) is used to manufacture vinyl chloride monomer (VCM), which in turn is the key precursor to PVC.

ZELEC® AN is an amine neutralized phosphate ester used in a variety of industrial composite product applications. It is an amine neutralized version of zelec un. Zelec an maintains the same mold release characteristics as zelec un (see below), but with reduced acidity. The reduced acidity of zelec an allows for reduced die corrosion in closed molded thermoset applications.

ZELEC® A130 can be used as a wetting agent in the paint and coating industries. In this application, it could also contribute to the improvement of corrosion resistance, gloss, color acceptance, wet scrub resistance, and the hiding power of the film. It can also be used as an antistatic agent in textile and leather finishing and processing and in rubber, plastic, and composite processing. It can also act as an emulsifier and corrosion inhibitor in metalworking fluid, printing pressrooms, and oil fields. It can also be used as a demolding agent in a construction area and in rubber, plastic, or composite processing. It also has lubrication properties for metalworking fluids and textile and leather finishing and processing, including extreme-pressure and anti-wear properties.

DREWPLAST® 154 is a nonionic surfactant that serves as a release agent and antistatic agent for plastics and films. Its chemical group aligns with lauramide dea, and it functions as a textile antistatic agent. Notably, the product is derived from plants and is bio-based.

ZELEC® A081 is an alcohol phosphate that can be used to help decrease the viscosity of high-pressure compounds. It can also be used to reduce and stabilize viscosity and act as a color stabilizer in rubber. It also plays the role of a lubricant additive for plastic materials and provides antistatic properties in fiber lubricating oils. It can also be used as a spreading agent for oils and waxes and as an internal demolding agent for molding plastic and pultrusion. It is an additive that inhibits deposits of a corrosive nature during the soldering of light metals (aluminum and magnesium) and can be used in construction as a concrete additive. It is also used as a dispersing agent in ink formulations.

TEGO® Antifoam 1488 is a versatile emulsion-based anti-foaming agent tailored for various applications. It effectively controls foam formation in processes like emulsion polymerization and textile sizing. With good compatibility, it finds use in diverse industrial additives, including metalworking fluids and nonwovens. This emulsion-type additive is available in drums, catering to different production scales. Its performance spans markets like adhesives and sealants, fluids and lubricants, and building materials. TEGO® Antifoam 1488's role in polymer dispersions manufacturing adds to its versatility and value.

Dynasylan® 6598 is an oligomeric siloxane featuring vinyl, propyl, and ethoxy groups. Developed from Dynasylan® VTMOEO, this colorless and nearly odorless liquid brings enhanced properties. Acting as an excellent silane compatibilizer, it bridges inorganic fillers like kaolin, MDH, and ATH with organic polymers such as EPDM, EVA, and PE. In mineral-filled and peroxide-crosslinked cable systems, Dynasylan® 6598 improves mechanical and electrical attributes, especially in moist conditions. With its high boiling start and flash point, it ensures safety, handling ease, and processing advantages. Furthermore, this product emits significantly less hydrolysis ethanol (VOC) compared to monomeric silanes, addressing environmental considerations.

TEGO® CYCLE CP 310 is an organo-modified siloxane that is used as a processing additive, compatibilizer, and for permanent modification of polymer properties. Its use provides several advantages for specific applications. It reduces gelling, resulting in lower failure rates, reduces pressure, increases throughput, and prevents melt fracture and shark skin effect. It also reduces surface roughness. TEGO® CYCLE CP 310 shortens cycle times, prevents cut propagation in oriented tapes and films, and improves mechanical performance, including notched impact strength and elongation at break. It also prevents stress cracking and whitening.

Dynasylan® VTMO is a bifunctional organosilane, combines a reactive vinyl group and a hydrolyzable inorganic trimethoxysilyl group. Its versatile reactivity enables chemical bonding to both inorganic materials (e.g., glass, metals, fillers) and organic polymers (such as thermosets, thermoplastics, elastomers). Functioning as a crosslinking agent, adhesion promoter, and surface modifier, Dynasylan® VTMO offers diverse applications.

TEGO® Cycle CP 320 is an organo-modified siloxane that is used as a processing additive, compatibilizer, and for permanent modification of polymer properties. It is particularly suitable for recycled polymers, as it can be used to compatibilize PE in PP, PP in PE, and PA in polyolefins. TEGO® Cycle CP 320 is ideal for producing automotive parts, electronic appliances, packaging materials, consumer goods, and oriented packaging straps. Its use provides several advantages for specific applications, including improved mechanical performance, better weld line strength, and prevention of stress cracking and whitening. It also improves mold release properties, reduces manual interventions, and allows for more exact reproduction of surface structure, resulting in shorter cycle times.

Dynasylan® 6498 is a concentrate of vinyl silane (oligomeric siloxane) containing vinyl and ethoxy groups. This low-viscosity liquid, nearly odorless and colorless, serves as a superb compatibilizer between inorganic fillers (such as kaolin, MDH, ATH) and organic polymers (including EPDM, EVA, PE).

TEGO® Antifoam KS 95 is a self-emulsifying organic antifoam concentrate enhanced with minor amounts of organo-siloxanes for improved efficiency. This antifoam is well-suited for industrial applications, specifically as an anti-foaming agent, and finds utility in various processes including polymerization, wastewater treatment, and suspension polymerization.

Dynasylan® 6490 is a concentrate of vinyl silane (oligomeric siloxane) containing both vinyl and methoxy groups. This nearly odorless, colorless, low-viscosity liquid acts as an excellent compatibilizer between inorganic fillers (such as kaolin, MDH, ATH) and organic polymers (including EPDM, EVA, PE).

TEGO® Antifoam 2263 XP is an emulsion antifoam featuring organo-modified siloxanes. This versatile product falls within the category of CASE ingredients and is specifically known for its function as an anti-foaming agent. It is most commonly applied in the production of waterborne adhesives, specifically in the realm of pressure-sensitive adhesive formulations.

Dynasylan® VTEO is a bifunctional organosilane, boasts a reactive vinyl group and a hydrolyzable inorganic triethoxysilyl group. With its dual reactivity, Dynasylan® VTEO forms chemical bonds with both inorganic materials (e.g., glass, metals, fillers) and organic polymers (including thermosets, thermoplastics, elastomers). This compound serves as a crosslinking agent, adhesion promoter, and surface modifier, providing versatile applications.

AEROSIL® OX 50 is a fumed silica with a very low specific surface area, low thickening, and high purity. The product can be used as an additive or as a raw material. In polymer composites, high filler loading can be achieved, making it possible to control essential characteristics of polymers.

AEROSIL® R 972 is hydrophobic fumed silica grade treated with DDS (Dichlordimethylsilane). The moderate hydrophobicity of these AEROSIL® products is suited for defoaming properties in the presence of appropriate hydrophobic liquids. They are recomended for improving the sedimentation stability of defoamer dispersions as well.

AEROSIL® R 974 is hydrophobic fumed silica grades treated with DDS (Dichlordimethylsilane). The moderate hydrophobicity of these AEROSIL® products is suited for defoaming properties in the presence of appropriate hydrophobic liquids. They are recommended for improving the sedimentation stability of defoamer dispersions as well.

SIPERNAT® 500 LS is a very finely ground silica with high surface area, low drying loss and particulary high absorbency.

AEROSIL® 200 is a hydrophilic fumed silica with a specific surface area of 200 m²/g.

TEGO® Sorb PY 88 TQ is a zinc ricinoleate-based odor absorber that operates on the key and locker principle, specifically designed for odor control. This product is not intended to impart flavor. It finds application in the production of masterbatches and compounds, where it excels at absorbing unwanted odors.

METABLEN™ S 2130 is a silicone-acrylic-based rubber impact modifier optimized for flame retardant polycarbonate (PC) resins. It adds colorability, heat-aging resistance and impact strength to PC and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ A 3000 is an acrylic-modified polytetrafluoroethylene (PTFE) used in vacuum molding, foam molding, blow molding and profiling. It improves the melt tension that is required in these processing methods by minimizing increases in melt viscosity, without sacrificing the inherent properties of thermoplastics.BenefitsIncreases melt tension of a resinMaintains fluidityEnhances die swellImproves the flexural modulus, heat deformation temperature, and other properties of polypropyleneAnti-drip effect with flame-retardant resinsImproves filler dispersibilityBetter surface appearanceIncreases foam expansion ratioApplicationsAutomotiveConsumer goodsElectric and electronics*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ A-3750 is an acrylic-modified polytetrafluoroethylene (PTFE) used as an anti-dripping agent in flame retardant formulations. It can be used for PC and alloy in automotive, aerospace, consumer goods, and electric and electronic applications.BenefitsResins with METABLEN™ A-3750 and flame retardants achieve V-0 in UL-94 testingImproves melt tensionIncreases die swell to improve surface appearanceImproves filler dispersibilityIncreases foam expansion ratioFeaturesAnti-drippingEasy to handleHigher dispersibility than standard PTFE powders*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ A 3800 is acrylic-modified polytetrafluoroethylene (PTFE) that can be used as an anti-dripping agent for flame retardant formulations. It can be used for PC and alloy in automotive, aerospace, consumer goods, and electric and electronics applications.BenefitsResins with METABLEN™ A-3800 and flame retardant achieve V-0 in UL-94 testingImproves melt tensionIncreases die swellEnhances surface appearanceIncreases foam expansion ratio FeaturesAnti-dripping capabilityEasy to handle and processFlame retardantGood mechanical propertiesDisperses better than standard PTFE powders *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ SX-006 is a silicone-acrylic rubber-type impact modifier that provides impact strength and weatherability while maintaining melt-flow ability and scratch resistance of PMMA and SAN. It also gives vivid molded-in colors like piano black. The compounded resins can be widely used in automotive exterior applications (e.g. front grill, pillar, door mirror housing). Features High impact strength in all temperature zones High modulus and excellent heat aging resistance Excellent colorability *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2030 is a silicone-acrylic-based rubber impact modifier with excellent weatherability and super high impact strength at room temperature and low temperatures. It is used for polycarbonates (PC) and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesGood impact strengthWeather stabilityHeat aging resistanceHydrolysis resistanceImpact resistance even at low temperatures *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S X-005 is a silicone-acrylic rubber-type impact modifier that provides flame retardance, hydrolysis resistance and impact strength. It is used for polycarbonates (PC) and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesFlame retardantWeather stabilityHydrolysis resistanceImpact resistance even at low temperaturesLow friction*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ L-1000 is an acrylic external lubricant that achieves excellent metal release for PVC, TPU and polyolefins in calendering, injection molding, blow molding and extrusion applications. BenefitsDelayed polyvinyl chloride (PVC) fusionDeposit preventionImproved productivityPrevents tack and bleeding of additivesDelivers shiny and smooth appearanceReduces deposits around die and adhesion in die or cylinder*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2001 is a silicone-acrylic rubber-type impact modifier with high impact strength in all temperatures and excellent weatherability. It can be used with ABS, PC, PLA, and other matrix resins in a variety of automotive, aerospace and electric and electronic applications. Features Can be used with recycled plastics Good weather stability Low temperature impact resistance *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ C 223A is a butadiene-based rubber and graft copolymer. It is used as an impact modifier for ABS, polyamides, PC, PLA, and other matrix resins in automotive and transportation, electrical and electronics, and consumer goods applications.FeaturesImpact resistanceSuper high impact strength in all temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2260 is a silicone-acrylic-based rubber core shell-type impact modifier that provides super high impact strength and weatherability to acrylonitrile butadiene styrene (ABS), acrylonitrile styrene acrylate (ASA) and poly methyl methacrylate (PMMA) through extrusion and moldings. It is used for esthetic exterior car components such as front grills, and housings for electronics.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

DIACARNA™ 30M is a copolymer of α-olefin and maleic anhydride. Applications include as a compounding additive for filler dispersant and adhesion promoter for PA/GF composites.

METABLEN™ S-2006 is a silicone-acrylic-based rubber impact modifier with high-impact strength at low temperatures and strong hydrolysis resistance. It is used for a variety of plastics in consumer goods and electric and electronics applications.FeaturesGood weather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2100 is a silicone-acrylic-based rubber impact modifier with good colorability and impact strength. It is used for polycarbonates (PC) and polycarbonate blends, polyvinyl chloride, engineering plastics and polyolefins in a variety of automotive, aerospace, consumer goods, and electric and electronic applications. METABLEN™ S-2100 provides ductility on facial impact tests, even after immersion of coating chemicals. The effect is maintained at higher molding temperatures. BenefitsEasy to processFlame retardancy for engineering plastics and polyolefins elastomersFeaturesGood colorabilityWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.