Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Industrial Additives Functions
- Plastics & Elastomers Functions
- Technologies
- Product Families
- Chemical Structure
Features & Benefits
- Labeling Claims
- Industrial Additives Features
- Materials Features
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Applications
- Industrial Additives End Use
- Application Details
- Due to WACKER® AK 100000 many diverse applications, no general processing information can be provided.
- Parameters will vary from application to application.
- Available in a range of viscosities, WACKER® SILICONE FLUIDS AK are miscible with each other in any ratio.
- The standard product's viscosity can thus be altered to suit your individual needs.
- WACKER® AK 100000 is a non-polar liquid and is immiscible with polar solvents such as water or short-chain alcohols.
- In aliphatic and aromatic hydrocarbons, chlorohydrocarbons, ethers, esters, ketones and higher alcohols, WACKER® AK 100000 is soluble in any proportion.
- Before the product is used with solvents for the first time, it is advisable to perform a lab-scale test.
- When solvents are used, please remember to read the appropriate hazard information.
- Release agent
- Antifoam agent
- Liquid dielectric for electrical and electronic equipment
- Damping medium
- Plastics additive
- Additive for textile and fiber auxiliaries
- Silicone fluids from our BELSIL® line are available for the cosmetic sector.
- Whenever particularly high heat and shear resistance is required, we recommend silicone fluids from our AK stab, AK visc and AKC product lines.
Properties
- Color
- Physical Form
- Appearance
- Clear colorless liquid
- Typical Properties
- Properties
- Minimal change in physical properties over a broad temperature range
- Excellent water-repellent properties
- Good dielectric properties
- Low surface tension and thus high surface activity
- Chemically highly unreactive
- Low solidifying point
- High heat resistance
- High flash point
- Good solubility in a wide range of solvents
Value | Units | Test Method / Conditions | |
Density (at 25°C) | approx. 0.97 | g/cm³ | DIN 51757 |
Flash Point | min. 320 | °C | ISO 2592 |
Ignition Temperature | 450 | °C | DIN 51794 |
Kinematic Viscosity (at 25°C) | approx. 100000 | mm²/s | DIN 53019 |
Refractive Index (at 25°C) | approx. 1.404 | — | DIN 51423 |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability
Storage & Handling
- Storage Information
Maximum temperature allowed during storage and transportation: 50°C