Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Segments
Nutraceuticals & Supplements
undefined
View All
HI&I Cleaning & Formulating
Chemical Manufacturing
Pharmaceuticals
Pulp & Paper
Oil & Gas
Agriculture & Feed
Case & Construction
Formulated Adhesives & Coatings
Food & Nutrition
Personal Care
Mining
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Plastics
Thermoset Resins
Products in Thermoset Resins
922 Products found in Thermoset Resins
Browse
Applications
Show All 5 Categories
Filters
Suppliers
Applications
Polymer Name
Mechanical Properties
End Uses
Features
Products
Brands
Suppliers
Formulations
Documents
Relevance
SACO AEI Polymers
PEXIDAN® SX523
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Low Voltage Insulation, Cables, Wires
Density:
950.0 - 950.0 kg/m³
PEXIDAN® SX523 pre-grafted black base is mixed with crosslinking catalyst masterbatch CM493 or CM497 in the ratio 95:5. This system is carbon loaded, with high UV stabilization, and has been developed especially for usage on overhead power cables insulation according NFC 33-209, “Câble Torsadé”. Crosslinking is obtained by exposure to moist or hot water immersion only.
Resin Systems
Resin Systems RS-3665
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
Density:
1200.0 - 1200.0 kg/m³
Tensile Strength:
55.12 - 55.12 MPa
Rs-3665 is a flame retardant rigid urethane material that has the look and feel of a thermoplastic material, but can be cast into thin and thickwall parts. This material offers good mechanical properties, as well as meets UL94-V-0 flammability requirements. This material can be pigmented to any color required.
Leepoxy Plastics
Leecast 23-130-5
Polymer Name:
Polyurethane (unspecified)
LEECAST 23-130-5 is a unique urethane system that contains neither MOCA nor TDI. LEECAST 23-130-5 is designed to provide excellent dielectric properties over a wide temperature range. It has good low temperature flexibility and is ideally suited for protecting pressure sensitive glass diodes and other fragile electrical circuitry in UL-listed products. Its low viscosity and long pot life make it attractive for penetrating complex modules and for the aggregate casting method of encapsulation and potting. LEECAST 23-130-5 also features excellent reversion resistance and hydrolytic stability.
Resin Systems
Resin Systems RS-3595
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
Density:
1135.73403 - 1135.73403 kg/m³
RS-3595 is a castable rigid urethane material that has the look and feel of a thermoplastic material but is easily cast into intricate thin and thickwall parts. It has good mechanical properties, has high strain capability and is easily pigmented into all opaque colors.
Resin Systems
Resin Systems RS-2926
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
Flexural Strength:
109.551 - 109.551 MPa
RS-2926 is a castable high temperature toughened epoxy resin that has the look and feel of a thermoplastic and/or urethane but offers higher temperature resistance than cast urethanes. It’s good impact strength makes this material and excellent choice for higher temperature applications.
Eagle Chemicals
Eagle Chemicals Polyol SHR 300 C
Polymer Name:
Polyurethane (MDI-based)
Chemical Family:
Polyurethanes (PU)
Polyol SHR 300 C / Cross.303 / ISO.SHR 300 A is Three component PU system suitable for the production of high hardness fashion soles.
Resin Systems
Resin Systems RS-2320
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
Flexural Strength:
91.637 - 91.637 MPa
RS-2320 is a castable, filled epoxy resin with good overall general properties and enhanced impact strength over other highly filled epoxy materials. This material provides excellent electrical grade insulation properties, high mechanical properties, and low thermal expansion. This material is self extinguishing.
SACO AEI Polymers
PEXIDAN® SX409NT
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Medium Voltage Insulation, Cables, Wires
Density:
928.0 - 928.0 kg/m³
PEXIDAN® SX409NT pre-grafted base is mixed with a crosslinking catalyst masterbatch CM401 in the ratio 95:5. The SX409NT:CM401 system has been developed specifically for cables operating up to 36kV. The graft compound contains a non-staining stabilizer and an effective tree retarder, giving outstanding long term retention of dielectric strength. This compound is typically used in conjunction with crosslinkable semi-conducting material for conductor and insulation shields. Crosslinking is obtained by exposure to moist or hot water immersion only.
Eagle Chemicals
USP-EAGLE (GP180-65)
Polymer Name:
Thermoset Polyester
Chemical Family:
Polyesters, Unsaturated Polyester (UPE)
Cure Method:
Chemical Cure
USP-EAGLE (GP180-65) is an Unsaturated Polyester resin non-accelerated, non-thixotropic, excellent wetting of filler and low shrinkage.It is used in casting application for sanitary ware.
Eagle Chemicals
USP-EAGLE (PIP40-62)
Polymer Name:
Thermoset Polyester
Chemical Family:
Unsaturated Polyester (UPE), Polyesters, Orthophthalics
Processing Methods:
Hand Lay-Up, Filament Winding, Hand Lay-up
Eagle Chemicals USP-EAGLE (PIP40-62) has ortho-based, very good mechanical properties, low viscosity, medium reactivity and good rigidity. Filament winding and hand lay up in pipe manufacturing
Resin Systems
Resin Systems RS-3720
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
Density:
1050.0 - 1050.0 kg/m³
Tensile Strength:
31.005 - 31.005 MPa
RS-3720 is a high performance rigid shore D-70 urethane material that has the look and feel of a thermoplastic material but can be cast into thin and thickwall parts. This material offers outstanding mechanical properties, including very high impact strength. This material can be pigmented to any color required.
Resin Systems
Resin Systems RS-2243 High Temp Epoxy
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
End Uses:
High Voltage Insulation
Flexural Strength:
55.12 - 55.12 MPa
RS-2243 is a castable, filled epoxy resin specifically designed for high temperature, high voltage insulator applications. This material provides excellent electrical grade insulation properties, high mechanical properties, and superior resistance to chemicals including concentrated acids and mild alkalines. This material has superior arc resistance as compared to standard electrical grade epoxy materials. In addition, this material is non-flammable and meets UL94V-0 requirements.
Resin Systems
Resin Systems RS-2515
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
Flexural Strength:
117.13 - 117.13 MPa
RS-2515 is a castable, high temperature resistant filled epoxy resin specifically designed to operate at temperatures up to 500F. This material provides excellent electrical grade insulation properties, high mechanical properties, and superior resistance to chemicals including concentrated acids and mild alkalines.
SACO AEI Polymers
PEXIDAN® SX546
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Low Voltage Insulation, Cables, Wires
Density:
920.0 - 920.0 kg/m³
PEXIDAN® SX546 pre-grafted base is mixed with crosslinking catalyst masterbatch CM493CD, for small cross sections, or CM497CD, in the ratio 95:5, for a 125ºC working temperature system. This system has ambient cure.
Resin Systems
Resin Systems RS-2271
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
End Uses:
High Voltage Insulation
Flexural Strength:
117.13 - 117.13 MPa
RS-2271 is a castable, filled epoxy resin specifically designed to operate under high voltage conditions in indoor applications, as well as SF6 environments. This material provides excellent electrical grade insulation properties, high mechanical properties, and superior resistance to chemicals including concentrated acids and mild alkalines.
Resin Systems
Resin Systems RS-2525
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
End Uses:
General Purpose, Wire Jacketing
Volume Resistivity:
10000000000000.0 - 10000000000000.0 Ohm-m
Flexural Strength:
55.12 - 55.12 MPa
RS-2525 is a castable, filled general purpose epoxy resin designed for electrical insulator applications. This material provides good electrical grade insulation properties, and superior resistance to chemicals including concentrated acids and mild alkalines.
SACO AEI Polymers
PEXIDAN® SX522A
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Low Voltage Insulation, Cables, Wires
Density:
920.0 - 920.0 kg/m³
PEXIDAN® SX522A pre-grafted base is mixed with crosslinking catalyst masterbatch CM401 in the ratio 95:5. This system has ambient cure.
SACO AEI Polymers
PEXIDAN® SX409
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Medium Voltage Insulation, Cables, Wires
Density:
928.0 - 928.0 kg/m³
PEXIDAN® SX409 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM401 in the ratio 95:5. The SX409:CM401 compound has been developed specifically for cables operating up to 36kV. This compound is typically used in conjunction with crosslinkable semi-conducting material for conductor and insulation shields. Crosslinking is obtained by exposure to moist or hot water immersion only.
Resin Systems
Resin Systems RS-3693
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
Density:
1250.0 - 1250.0 kg/m³
Tensile Strength:
44.096 - 44.096 MPa
RS-3693 is a filled castable urethane that produces dimensionally stable castings with a “thermoplastic” feel and appearance.
Resin Systems
Resin Systems RS-2925 15% Filled Toughened Epoxy
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
Flexural Strength:
97.838 - 97.838 MPa
RS-2925 is a castable 15% filled toughened epoxy resin that has the look and feel of a thermoplastic and/or urethane, but offers higher temperature resistance than cast urethanes. Its high impact strength makes this material an excellent choice when urethanes are not sufficient to handle the job. RS-2925 has improved flammability properties as compared to RS-2920.
Resin Systems
Resin Systems RS-2240
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
End Uses:
High Voltage Insulation
Flexural Strength:
55.12 - 55.12 MPa
RS2240 is a castable, filled epoxy resin specifically designed for high voltage insulator applications. This material provides excellent electrical grade insulation properties, high mechanical properties, and superior resistance to chemicals including concentrated acids, and mild alkalines. This material also offers superior arc resistance as compared to standard electrical grade epoxy materials. In addition, this material is non-flammable and meets UL94V-0 requirements.
SACO AEI Polymers
PEXIDAN® VT-2UV
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Cables, Wires
Density:
1300.0 - 1300.0 kg/m³
PEXIDAN® V/T-2UV is a low density flame retardant XLPE system, curable by moisture and consists of a silane grafted base compound A-3001 and a catalyst masterbatch CAT-083FR-UV. Mixed and extruded in the proper proportions (50/50), the two components result in a material that is curable by exposure to hot water. PEXIDAN® V/T-2UV is halogenated but is RoHS-compliant. Insulation made with this system may be marked SUNRES or ‘SR’ in all colors and in all sizes per UL44, UL4703 and CSA C22.2 #38. This product is also CSA-listed for RW90, RWU90, RPV90 RPVU90 and CIC, ‘SR’ and -40C rated.
Eagle Chemicals
USP-EAGLE (GP20-62)
Polymer Name:
Thermoset Polyester
Chemical Family:
Polyesters, Unsaturated Polyester (UPE)
Cure Method:
Chemical Cure
Processing Methods:
Lamination
USP-EAGLE (GP20-62) is Unsaturated Polyester resin non-accelerated, non-thixotropic, light color, rigid film, and low viscosityit is used in glass fiber lamination for general purpose applications.
Resin Systems
Resin Systems RS-3690
Polymer Name:
Polyurethane (unspecified)
Density:
1250.0 - 1250.0 kg/m³
Tensile Strength:
75.101 - 75.101 MPa
SACO AEI Polymers
PEXIDAN® HF SX612S
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Cables, Wires
Density:
1470.0 - 1470.0 kg/m³
Tensile Strength:
14.0 - 14.0 MPa
PEXIDAN® HF SX612S pre-grafted base is mixed with catalyst masterbatch CM602 or CM601, in an addition rate between 5% and 10%, depending on extrusion conditions. This system has ambient cure. PEXIDAN® HF SX612S has been designed to meet the requirements of IEC 60092-351 HF90, EN 50363-5, EI5 type, EN 50525-1 and EN 50525-3-41.
Resin Systems
Resin Systems RS-2244 No Track Epoxy Resin
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
End Uses:
High Voltage Insulation
Flexural Strength:
62.01 - 62.01 MPa
RS-2243 is a castable, filled epoxy resin specifically designed for high temperature, high voltage insulator applications. This material provides excellent electrical grade insulation properties, high mechanical properties, and superior resistance to chemicals including concentrated acids and mild alkalines. This material has superior arc resistance as compared to standard electrical grade epoxy materials. In addition, this material is non-flammable and meets UL94V-0 requirements.
Eagle Chemicals
USP-EAGLE (GP25-65)
Polymer Name:
Thermoset Polyester
Chemical Family:
Polyesters, Unsaturated Polyester (UPE)
Cure Method:
Chemical Cure
Processing Methods:
Lamination
USP-EAGLE (GP25-65) is Unsaturated Polyester resin non-accelerated, non-thixotropic, light color and low viscosityit is used in general-purpose & glass fiber lamination.
ADEKA Corporation
ADEKA™ ED-503
Polymer Name:
Epoxy Resins & Compounds
ADEKA™ ED-503 is distinguished by the polymer name epoxy resins and compounds, is a resin designed for plastics and elastomer functions. Rooted in advanced plastic technologies, it aligns with the evolving needs of the industry, contributing as a crucial component in formulations within the realm of plastics.
SACO AEI Polymers
PEXIDAN® SX408
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Low Voltage Insulation, Cables, Wires
Density:
925.0 - 925.0 kg/m³
PEXIDAN® SX408 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM401 in the ratio 95:5. If high thermal aging is required, than CM493 should be used instead. Crosslinking is obtained by exposure to moist or hot water immersion only.
SACO AEI Polymers
PEXIDAN® HF SX622
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Cables, Wires
Density:
1430.0 - 1430.0 kg/m³
Tensile Strength:
10.5 - 10.5 MPa
PEXIDAN® HF SX622 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM540U/1 in the ratio 95:5 or CM540U in the ratio 97:3. Crosslinking is obtained by exposure to moist or hot water immersion only. PEXIDAN® HF SX622 has been designed to meet the requirements of IEC 60092-360 SHF2 sheathing.
Resin Systems
Resin Systems RS-2277
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
End Uses:
High Voltage Insulation
Flexural Strength:
55.12 - 55.12 MPa
RS-2277 is a patented, castable, lead free insulating grade filled epoxy resin specifically designed for high voltage insulator applications requiring X-Ray shielding. This material provides good electrical grade insulation properties, high mechanical properties, and superior arc resistance to any lead oxide filled epoxy. This material has equal x-ray shielding to a 25% lead oxide filled epoxy. This material is non-flammable and meets UL94V-0 requirements.
ADEKA Corporation
ADEKA™ EP-5100R
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
ADEKA™ EP-5100R, an epoxy resin and compound polymer, is at the forefront of plastics technology. Specifically designed for casting methods, it ensures optimal performance in various industrial applications. ADEKA™ EP-5100R stands as a testament to reliability in precision casting processes.
ADEKA Corporation
ADEKA™ EP-49-10N
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
ADEKA™ EP-49-10N, an epoxy resins and compounds polymer aligned with advanced plastic technologies, excels in plastics processing methods, especially casting. Noteworthy for its corrosion-resistant properties and excellent adhesion, ADEKA™ EP-49-10N is a top-tier choice for applications demanding superior performance and durability.
SACO AEI Polymers
PEXIDAN® HF SX559
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Cables, Wires, Nuclear Power Applications
Density:
1490.0 - 1490.0 kg/m³
Tensile Strength:
14.0 - 14.0 MPa
PEXIDAN® HF SX559 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM540U in a ratio of 97:3 to 95:5. Crosslinking is obtained by exposure to moist or hot water immersion only. PEXIDAN® HF SX559 has been designed to meet the requirements of IEC 60092-351 HF90, EN 50363-5, EI5 type, EN 50525-1, EN 50525-3-41 or other insulation or sheathing applications where high fire retardancy is required. Good CPR performance.
SACO AEI Polymers
PEXIDAN® HF SX650
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Cables, Wires
Density:
1470.0 - 1470.0 kg/m³
Tensile Strength:
12.0 - 12.0 MPa
PEXIDAN® HF SX650 pre-grafted base is mixed with catalyst masterbatch CM603 or CM601, in an addition rate between 3% and 5%, depending on extrusion conditions. Crosslinking is obtained by exposure to moist or hot water immersion only. PEXIDAN® HF SX650 system has been developed to meet specification requirements TUV 2Pfg1169:2007, EN 50618:2014 and IEC 62930.
SACO AEI Polymers
PEXIDAN® HF SX545
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Cables, Wires
Density:
1490.0 - 1490.0 kg/m³
Tensile Strength:
12.0 - 12.0 MPa
PEXIDAN® HF SX545 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM540U in the ratio 95:5. Crosslinking is obtained by exposure to moist or hot water immersion only. PEXIDAN® HF SX545 has been designed to meet the requirements of IEC 60092-351 HF90, EN 50363-5, EI5 type, EN 50525-1 and EN 50525-3-41.
Show
36
of 922 results
Go to page
1
2
3
4
5
6
7
8
9
10