Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Segments
Nutraceuticals & Supplements
undefined
View All
HI&I Cleaning & Formulating
Chemical Manufacturing
Pharmaceuticals
Pulp & Paper
Oil & Gas
Agriculture & Feed
Case & Construction
Formulated Adhesives & Coatings
Food & Nutrition
Personal Care
Mining
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Plastics
Thermoset Resins
Products in Thermoset Resins
922 Products found in Thermoset Resins
Browse
Applications
Show All 5 Categories
Filters
Suppliers
Applications
Polymer Name
Mechanical Properties
End Uses
Features
Products
Brands
Suppliers
Formulations
Documents
Relevance
Resin Systems
Resin Systems RS-3665
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
Density:
1200.0 - 1200.0 kg/m³
Tensile Strength:
55.12 - 55.12 MPa
Rs-3665 is a flame retardant rigid urethane material that has the look and feel of a thermoplastic material, but can be cast into thin and thickwall parts. This material offers good mechanical properties, as well as meets UL94-V-0 flammability requirements. This material can be pigmented to any color required.
Eagle Chemicals
USP-EAGLE (GP35-55)
Polymer Name:
Thermoset Polyester
Chemical Family:
Polyesters, Unsaturated Polyester (UPE)
Cure Method:
Chemical Cure
Processing Methods:
Hand Lay-Up, Hand Lay-up, Spray Lay-up, Spray Lay-Up
USP-EAGLE (GP35-55) is an Unsaturated Polyester resin non pre-accelerated, thixotropic, very good adhesion to acrylic sheets, good wett-ability, and low viscosity.It is used in a spray, hand lay-up, glass fiber reinforced back lamination for sanitary ware.
SACO AEI Polymers
PEXIDAN® SX523
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Low Voltage Insulation, Cables, Wires
Density:
950.0 - 950.0 kg/m³
PEXIDAN® SX523 pre-grafted black base is mixed with crosslinking catalyst masterbatch CM493 or CM497 in the ratio 95:5. This system is carbon loaded, with high UV stabilization, and has been developed especially for usage on overhead power cables insulation according NFC 33-209, “Câble Torsadé”. Crosslinking is obtained by exposure to moist or hot water immersion only.
SACO AEI Polymers
PEXIDAN® SX546
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Low Voltage Insulation, Cables, Wires
Density:
920.0 - 920.0 kg/m³
PEXIDAN® SX546 pre-grafted base is mixed with crosslinking catalyst masterbatch CM493CD, for small cross sections, or CM497CD, in the ratio 95:5, for a 125ºC working temperature system. This system has ambient cure.
SACO AEI Polymers
PEXIDAN® SX720
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Pipes
Density:
952.0 - 952.0 kg/m³
PEXIDAN® SX720 is a silane grafted polyethylene compound, curable by exposure to moist conditions, and possessing good extrusion properties at high output rates. The graft component SX720 is mixed with a crosslinking catalyst masterbatch CM488 generally in the ratio 95:5. The highly crosslinked materials produced by this two-component system possess excellent impact strength, ESCR, creep and internal pressure resistance under ambient and elevated temperature conditions. These materials have been formulated for hot and cold water pressure pipes and are easily extrudable on conventional polyethylene extrusion lines.
Resin Systems
Resin Systems RS-2295
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
End Uses:
High Voltage Insulation
Flexural Strength:
55.12 - 55.12 MPa
RS-2295 is a patented, high density filled, castable, lead free insulating grade epoxy resin specifically designed for high voltage insulator applications requiring X-Ray Shielding. This material provides 20% of the X-Ray Shielding of lead metal, and is equivalent to industry standard 30% lead oxide filled “Orange Epoxyâ€. This material is non-hazardous and can be processed, machined and disposed of as a non hazardous material. This material also meets UL94V-0 flammability rating.
Leepoxy Plastics
Leecast 29-192-1
Polymer Name:
Epoxy Resins & Compounds
Volume Resistivity:
1000000000000.0 - 1000000000000.0 Ohm-m
LEECAST 29-192-1 is a two-part epoxy compound designed for potting electrical and electronic components. The advantages of LEECAST 29-192-1 include, good thermal shock resistance, good electrical properties, non-abrasive filler, and room temperature cure.
SACO AEI Polymers
PEXIDAN® SX409
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Medium Voltage Insulation, Cables, Wires
Density:
928.0 - 928.0 kg/m³
PEXIDAN® SX409 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM401 in the ratio 95:5. The SX409:CM401 compound has been developed specifically for cables operating up to 36kV. This compound is typically used in conjunction with crosslinkable semi-conducting material for conductor and insulation shields. Crosslinking is obtained by exposure to moist or hot water immersion only.
Eagle Chemicals
USP-EAGLE (GP30-65)
Polymer Name:
Thermoset Polyester
Chemical Family:
Polyesters, Unsaturated Polyester (UPE)
Cure Method:
Chemical Cure
USP-EAGLE (GP30-65) is an Unsaturated Polyester resin non-economic slight dark color with good chemical resistance.It is used in glass fiber lamination and general-purpose.
Resin Systems
Resin Systems RS-2925 15% Filled Toughened Epoxy
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
Flexural Strength:
97.838 - 97.838 MPa
RS-2925 is a castable 15% filled toughened epoxy resin that has the look and feel of a thermoplastic and/or urethane, but offers higher temperature resistance than cast urethanes. Its high impact strength makes this material an excellent choice when urethanes are not sufficient to handle the job. RS-2925 has improved flammability properties as compared to RS-2920.
Resin Systems
Resin Systems RS-2525
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
End Uses:
General Purpose, Wire Jacketing
Volume Resistivity:
10000000000000.0 - 10000000000000.0 Ohm-m
Flexural Strength:
55.12 - 55.12 MPa
RS-2525 is a castable, filled general purpose epoxy resin designed for electrical insulator applications. This material provides good electrical grade insulation properties, and superior resistance to chemicals including concentrated acids and mild alkalines.
SACO AEI Polymers
PEXIDAN® SX522A
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Low Voltage Insulation, Cables, Wires
Density:
920.0 - 920.0 kg/m³
PEXIDAN® SX522A pre-grafted base is mixed with crosslinking catalyst masterbatch CM401 in the ratio 95:5. This system has ambient cure.
SACO AEI Polymers
PEXIDAN® HF SX524
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Cables, Wires
Density:
1400.0 - 1400.0 kg/m³
Tensile Strength:
10.0 - 10.0 MPa
PEXIDAN® HF SX524 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM424 or CM424/1, in the ratio 95:5. Crosslinking is obtained by exposure to moist or hot water immersion only. PEXIDAN® HF SX524 has been developed specially for particularly optical fiber ADSS (all dielectric self-supporting) communication cables to be installed on overhead power distribution networks. The material is black in color and suitable for outdoor use with excellent tracking and UV resistance.
Eagle Chemicals
Eagle Chemicals Polyol SHR 300 C
Polymer Name:
Polyurethane (MDI-based)
Chemical Family:
Polyurethanes (PU)
Polyol SHR 300 C / Cross.303 / ISO.SHR 300 A is Three component PU system suitable for the production of high hardness fashion soles.
Leepoxy Plastics
Leecast 30-125
Polymer Name:
Polyurethane (unspecified)
LEECAST 30-125 is a two-component urethane that is mixed and poured at room temperature. LEECAST 30-125 develops full hardness after 24 hours at room temperature to provide an impact, UV and temperature resistant system.
Resin Systems
Resin Systems RS-2287
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
Flexural Strength:
62.01 - 62.01 MPa
RS-2287 is a high density, castable, lead free non-insulating grade filled epoxy resin designed for applications requiring x-ray shielding. This material provides 50% of the x-ray shielding of lead metal at a given thickness, has high mechanical properties, can be cast into complex shapes, and is easily machined with lead free processing techniques. this material is non-flammable and meets UL94V-0.
Resin Systems
Resin Systems RS-3111
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
Density:
1100.0 - 1100.0 kg/m³
Tensile Strength:
44.785 - 44.785 MPa
RS-3111 is an unfilled polyurethane that produces tough, dimensionally stable castings and is used to produce parts requiring a “thermoplastic” feel and appearance.
Resin Systems
Resin Systems RS-2279 Outdoor Epoxy Resin
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
End Uses:
High Voltage Insulation
Flexural Strength:
105.417 - 105.417 MPa
RS-2279 is a castable, filled epoxy resin specifically designed to operate under high voltage conditions in outdoor applications, as well as SF6 environments. This material provides excellent electrical grade insulation properties, high mechanical properties, and superior resistance to chemicals including concentrated acids and mild alkalines.
Leepoxy Plastics
Leecast 15-95-3
Polymer Name:
Epoxy Resins & Compounds
Volume Resistivity:
2000000000000.0 - 2000000000000.0 Ohm-m
LEECAST 15-95-3 is a two-part epoxy casting compound designed for encapsulation of high voltage components. Used in UL-listed applications requiring excellent electrical performance, heat dissipation,and flame retardance, it provides a system that is non-burning and highly resistant to thermal cycling with minimal effect on components.
SACO AEI Polymers
PEXIDAN® HF SX623
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Cables, Wires
Density:
1430.0 - 1430.0 kg/m³
Tensile Strength:
10.3 - 10.3 MPa
PEXIDAN® HF SX623 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM540U/1 in the ratio 95:5 or CM540U in the ratio 97:3. Crosslinking is obtained by exposure to moist or hot water immersion only. PEXIDAN® HF SX623 has been designed to meet the requirements of IEC 60092-360 SHF2, BS 7655-2.6 SW4 and EN 50264 sheathing applications.
Eagle Chemicals
USP-EAGLE (GP25-65)
Polymer Name:
Thermoset Polyester
Chemical Family:
Polyesters, Unsaturated Polyester (UPE)
Cure Method:
Chemical Cure
Processing Methods:
Lamination
USP-EAGLE (GP25-65) is Unsaturated Polyester resin non-accelerated, non-thixotropic, light color and low viscosityit is used in general-purpose & glass fiber lamination.
Resin Systems
Resin Systems RS-2244 No Track Epoxy Resin
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
End Uses:
High Voltage Insulation
Flexural Strength:
62.01 - 62.01 MPa
RS-2243 is a castable, filled epoxy resin specifically designed for high temperature, high voltage insulator applications. This material provides excellent electrical grade insulation properties, high mechanical properties, and superior resistance to chemicals including concentrated acids and mild alkalines. This material has superior arc resistance as compared to standard electrical grade epoxy materials. In addition, this material is non-flammable and meets UL94V-0 requirements.
allnex
ALNOVOL® UF 410 RPC
Functions:
Crosslinking Agent, Resin
Chemical Family:
Phenols & Phenolics
ALNOVOL® UF 410 RPC, a carbamic resin on silica, demonstrates compatibility with various synthetic and natural rubbers. Notably, its composition prevents the formation of a clear solution in solvents due to the silica carrier. Primarily functioning as a crosslinking agent and binder, this resin is specifically designed for applications in tires. Its elastomeric functions contribute as a resin within this context.
Resin Systems
Resin Systems RS-2299
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
End Uses:
High Voltage Insulation
Flexural Strength:
55.12 - 55.12 MPa
RS-2299 is a patented, high density filled, castable, lead free insulating grade epoxy resin specifically designed for high voltage insulator applications requiring x-ray shielding. This material provides greater than 20% of the x-ray shielding of lead metal, and is equivalent or better than industry standard 30% lead oxide filled “orange†epoxy. This material is non-hazardous, and meets UL94V-0 flammability requirements.
Leepoxy Plastics
Leecast 37-90
Polymer Name:
Epoxy Resins & Compounds
LEECAST 37-90 is a proprietary anhydride cured epoxy system. LEECAST 37-90 is light in color and may be used with features a convenient 1:1 by volume mix ratio. Electrical properties are excellent. Mechanical and thermal properties are also very good - comparable with resins cured with amine hardeners.
Eagle Chemicals
USP-EAGLE (PIP40-42)
Polymer Name:
Thermoset Polyester
Chemical Family:
Unsaturated Polyester (UPE), Polyesters, Orthophthalics
Cure Method:
Chemical Cure
Processing Methods:
Hand Lay-Up, Filament Winding
USP-EAGLE (PIP40-42) is Unsaturated Polyester resin ortho based, very good mechanical properties, low viscosity, medium reactivity, and good rigidityit is used in filament winding, hand lay-up in pipe manufacturing.
SACO AEI Polymers
PEXIDAN® HF SX612S
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Cables, Wires
Density:
1470.0 - 1470.0 kg/m³
Tensile Strength:
14.0 - 14.0 MPa
PEXIDAN® HF SX612S pre-grafted base is mixed with catalyst masterbatch CM602 or CM601, in an addition rate between 5% and 10%, depending on extrusion conditions. This system has ambient cure. PEXIDAN® HF SX612S has been designed to meet the requirements of IEC 60092-351 HF90, EN 50363-5, EI5 type, EN 50525-1 and EN 50525-3-41.
SACO AEI Polymers
PEXIDAN® HF SX622
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Cables, Wires
Density:
1430.0 - 1430.0 kg/m³
Tensile Strength:
10.5 - 10.5 MPa
PEXIDAN® HF SX622 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM540U/1 in the ratio 95:5 or CM540U in the ratio 97:3. Crosslinking is obtained by exposure to moist or hot water immersion only. PEXIDAN® HF SX622 has been designed to meet the requirements of IEC 60092-360 SHF2 sheathing.
SACO AEI Polymers
PEXIDAN® HF SX559
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Cables, Wires, Nuclear Power Applications
Density:
1490.0 - 1490.0 kg/m³
Tensile Strength:
14.0 - 14.0 MPa
PEXIDAN® HF SX559 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM540U in a ratio of 97:3 to 95:5. Crosslinking is obtained by exposure to moist or hot water immersion only. PEXIDAN® HF SX559 has been designed to meet the requirements of IEC 60092-351 HF90, EN 50363-5, EI5 type, EN 50525-1, EN 50525-3-41 or other insulation or sheathing applications where high fire retardancy is required. Good CPR performance.
ADEKA Corporation
ADEKA™ EP-49-10N
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
ADEKA™ EP-49-10N, an epoxy resins and compounds polymer aligned with advanced plastic technologies, excels in plastics processing methods, especially casting. Noteworthy for its corrosion-resistant properties and excellent adhesion, ADEKA™ EP-49-10N is a top-tier choice for applications demanding superior performance and durability.
ADEKA Corporation
ADEKA™ EP-5100R
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
ADEKA™ EP-5100R, an epoxy resin and compound polymer, is at the forefront of plastics technology. Specifically designed for casting methods, it ensures optimal performance in various industrial applications. ADEKA™ EP-5100R stands as a testament to reliability in precision casting processes.
Resin Systems
Resin Systems RS-2277
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
End Uses:
High Voltage Insulation
Flexural Strength:
55.12 - 55.12 MPa
RS-2277 is a patented, castable, lead free insulating grade filled epoxy resin specifically designed for high voltage insulator applications requiring X-Ray shielding. This material provides good electrical grade insulation properties, high mechanical properties, and superior arc resistance to any lead oxide filled epoxy. This material has equal x-ray shielding to a 25% lead oxide filled epoxy. This material is non-flammable and meets UL94V-0 requirements.
ADEKA Corporation
ADEKA™ ED-506
Polymer Name:
Epoxy Resins & Compounds
ADEKA™ ED-506, distinguished by the polymer name epoxy resins and compounds, holds a key position as a specialized resin in the domain of plastics and elastomer functions. With a commitment to advanced plastic technologies, this product seamlessly integrates into formulations, ensuring a versatile and high-performance contribution to the ever-evolving landscape of the plastics industry. ADEKA™ ED-506 embodies excellence, reflecting a dedication to meeting the diverse demands within the realm of plastics and elastomer applications.
ADEKA Corporation
ADEKA™ EP-4005
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
End Uses:
Engineered Applications, Electrical/Electronic Applications
ADEKA™ EP-4005, a stellar member of the epoxy resins and compounds family, is tailored to meet the demands of diverse applications. Boasting features like good adhesion, good flexibility, and low viscosity, this polymer ensures superior performance in both electrical/electronic and engineered applications. Specifically designed for use in casting processes within plastics and elastomers, ADEKA™ EP-4005 stands as a reliable choice for those seeking versatility and excellence in their material formulations.
Leepoxy Plastics
Leecast 16-46 A
Polymer Name:
Epoxy Resins & Compounds
Volume Resistivity:
1000000000000.0 - 1000000000000.0 Ohm-m
Leecast 16-46 A is a two-part epoxy compound designed for the encapsulation of electrical and electronic components. The advantages of LEECAST 16-46 include flame retardancy, good thermal shock resistance, good electrical properties, non-abrasive filler, easy 1 to 1 mix ratio and room temperature cure.
SACO AEI Polymers
PEXIDAN® HF X/T
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Building Wire Insulation, Low Voltage Insulation, Cables, Building Materials, Wires
Density:
1290.0 - 1290.0 kg/m³
PEXIDAN® HF X/T is a unique low smoke halogen free flame retardant 90°C wet-rated XL-insulation system curable by moisture. It consists of a silane pre-grafted base compound SX651 and a catalyst masterbatch CM540U. Mixed and extruded in the proper proportions (95:5), the two components result in a material that is crosslinkable by exposure to 90°C hot water. PEXIDAN® HF X/T is REACH and RoHS-compliant and is UL 2885 certified to bear the Halogen Free “HF” designation. PEXIDAN® HF X/T is UL-bulletinized and wire made with this insulation system may be marked as Oil Resistant “PR I” and “PR II”, Gas & Oil Resistant “GR I” and “GR II”, “-40C” and “SUNRES” in all colors. This compound will meet a 105°C dry rating.
Show
36
of 922 results
Go to page
1
2
3
4
5
6
7
8
9
10