Products in Thermoset Resins

KPR 6300 by Kemrock Industries and Exports is a superior general purpose, orthophthalate-based unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6300 is used in FRP composites.

ebalta AH 140 is a very thin liquid two-component-epoxy resin with high values of strength and high heat resistance. Due to its very good impregnating and wetting properties it is suitable as laminating resin for high-strength components with fabrics of glass –or carbon fiber. Especially for thin laminates, a post-curing of 16 hours at 80°C, after curing at room temperature, is essential in order to guarantee a complete curing. Otherwise the non post-cured laminate will be brittle and the adhesion of the layers with each other will not be sufficient.

BC 7136-2 is an aluminum filled thick section casting system with heat resistance to 300°F. May be cast to a thickness of 2 inches in non-conductive molds, 3 inches in conductive molds, and thicker sections with the addition of bulk fill. For service temperature above 150°F a post-cure is required. Does not contain VCHD or MDA. BC 7136-2 is recommended for uses such as: RTM and RIM molds, matched dies, injection and compression molds, and constructing vacuum form tools.BC 7136-2 can be removed from the mold after allowing to set 24 hours at room temperature (75°F). Post cure for applications requiring temperatures above 150°F can be accomplished in an oven or in use by a gradual heat rise; 2 hours @ 150°F, plus 2 hours @ 250°F, plus 2 hours @ 300°F.

Durez™ 32245 by Sumitomo Bakelite Company is comprised of Phenolic Compound. It is commonly used Durez™ 32245 is certified as UL Flame Rated. It is available in Granules form.

KarpatSmoly UF Resin Grade MDF is an aqueous suspension, non-flammable, non-explosive. UF resin of lowered toxicity withfree formaldehyde content not above 0.1%.

PANDEX, WALL-LITE series are single-pack and twin-pack polyurethane resins developed for waterproofing of rooftops and walls and adhesion of rubber chips. The series characteristically excel in workability and hardening effects.

CLR1329 is a two component heat cured epoxy casting system. The cured product is suitable for outdoor applications. The product passes accelerated in-house ultraviolet testing without chalking. The product passes in-house ul 94-hb flammability testing.

Resin-SA Pty Ltd RES CR002-U-N-A appears clear and it is fast curing casting resin.

SIROPOL 7130 resin is a high viscosity, non­promoted, chemical and water resistant, Neopentyl Glycol Isophthalic Resin.

Ares P130 is versatile medium reactivity DCPD resin for all sectors. Low styrene content and excellent dimensional stability. Good mechanical characteristics and excellent compatibility with glass fibers. Also ideal for spray up use.

TC-1614 A/B is an unfilled, low viscosity epoxy resin system.It is designed to seal porous to semi-porous substrates developing remarkable strength.TC-1614 A/B also has exceptional adhesive characteristics and is capable of high temperatures.

Proxima® HPR 2100 is uniquely formulated to provide the most superior toughness performance among Proxima® resins. Proxima® HPR 2100 shows higher impact strength than the standard formulation while maintaining stiffness and glass transition temperature.

Shanghai Sanzheng Polymer Material Low Shrinkage Silane Cross-Linkable PE Compound 4244 is suitable for 1kv and below low voltage cable, it is composed by 95% silane crosslinkable low density polyethylene (compound A) and 5% catalyst (compound B). The main raw materials of the product are imported high-quality LDPE and silane crosslink agent.

TEXALAN® 282A This product is safe and environmentally friendly, has excellent abrasion resistance, solvent resistance, good hand feeling, repeated benefits High utilization rate, high strength and excellent processing performance.

BC 5200 is a medium viscosity fast gelling two part Epoxy Adhesive System. With an easy to use 1 to 1 mix ratio, BC 5200 is considered an excellent general purpose adhesive for in-shop use. BC 5200 will bond to wood, concrete, select plastics, and most metal surfaces.Surface Preparation:Areas to be adhered to should be clean and dry, free of dust, oil, and release agents. It is advisable to scarify the surface with sand paper prior to application.Mixing Instructions:Combine 1 part of Resin to 1 part of Hardener by weight or by volume. Setting time is 4 to 4.5 minutes. May be applied by any reasonable thickness by spreading or splining. Do not work with more material than can be applied in 4 minutes. Surfaces should be held in position until cure is affected.p

Durez™ SUMIKON PM-9610 by Sumitomo Bakelite Company is comprised of Phenolic Compound. It is commonly used It is available in Granules form.

Durez™ 00118 by Sumitomo Bakelite Company is comprised of Phenolic Compound. It is commonly used Durez™ 00118 is certified as UL Flame Rated. It is available in Granules form.

Surkofilm® MR132 contains both polyether and polyester, aliphatic and some aromatic based high molecular weight structures, and comprise a range of solvent based film forming urethanes, which can be used on a wide variety of substrates where a demanding performance calls for high quality inks.

PANDEX, WALL-LITE series are single-pack and twin-pack polyurethane resins developed for waterproofing of rooftops and walls and adhesion of rubber chips. The series characteristically excel in workability and hardening effects.

DI-PAK E-4500 SERIESFlexible, 45, 65 and, 95 shore A hardness, potting and encapsulating systems. Flame retardant (FR), accelerated 3 minute (-3) gel time, and black or unpigmented versions are available.

BC 7062 are aluminum filled, low viscosity epoxy mass casting resins. These room temperature cure systems allow the user choice thicknesses of 1/8 inch to a maximum of 6 inches without foaming or yielding excessive shrinkage. Casting thicknesses may be increased by incorporating aluminum needles, puffs or granules. BC 7062, when properly cured, provides nearly perfect reproduction, resulting in a dimensionally stable, hard, tough surface. For use in constructing duplicate models, prototypes, patterns, facing dies, etc.

Ares P114 is medium reactivity orthophthalic resin with high transparency, with controlled peak to avoid tension. Excellent brilliance. Available in low or high viscosity. It is suitable for casting, for sheets and transparent objects.

Siropol 8340 resin is medium viscosity, medium reactivity, general purpose, unsaturated polyester resin. The raw materials used in the manufacture of this resin are listed as acceptable in FDA regulation Title 21 CFR 177.2420 for repeated use in contact with food subject to user’s compliance with the prescribed limitations of that regulation.

MB 1300 is a Mahogany colored rigid closed-cell polyurethane foam tooling and modeling board. MB 1300 is medium low density foam of approximately 30lbs/ft³ board. Easily cut using CNC machining equipment the MB 1300 is perfectly suited for visual master models, architectural design models as well as design verification and prototype tools.

Brandonite® 1000-70D contains features such as Abrasion resistant and highly resilient.

DI-PAK E-4500 SERIESFlexible, 45, 65 and, 95 shore A hardness, potting and encapsulating systems. Flame retardant (FR), accelerated 3 minute (-3) gel time, and black or unpigmented versions are available.

BC 6005 is a snow white thixotropic epoxy resin designed specifically for quality reproduction of a variety of surfaces. A room temperature cure system that offers ample working time yet affords quick-tack for lamination. BC 6005 may be applied easily with a brush or troweled to a thickness of 1/8" or less on vertical surfaces or over sharp radii without sag or fear of run-off. When cured, this resin system provides a hard tough chip-resistant surface.

RIGIDDI-PAK R-4545 SeriesA very low viscosity potting and encapsulating system with excellent flow and penetration into the most intricate electronic components, without voids or porosity. The R-4545 Series cure to a hard, shiny, high gloss, plastic finish that is free from "blushing" under all humidity conditions. The R-4545 Series is ideal for electrical applications where surface finish and appearance are critical.

HK Research R0217 is a resilient, light stabilized void free polyester casting resin.

Surkofilm® 1137 contains both polyether and polyester, aliphatic and some aromatic based high molecular weight structures, and comprise a range of solvent based film forming urethanes, which can be used on a wide variety of substrates where a demanding performance calls for high quality inks.

Durez™ SUMIKON PM-9640 by Sumitomo Bakelite Company is comprised of Phenolic Compound. It is commonly used Durez™ SUMIKON PM-9640 is certified as UL Flame Rated. It is available in Granules form.

Ocpol 700HV is a clear non-Accelerated orthophthalic unsaturated polyester resin. It is highly water resistance. Due to its outstanding stability and excellent performance it is use in boats water tanks, bath tubs shower tub etc.

This product is a Polyurethane system If the product is cured at room temperature, no entire chemical and mechanical load before 7 days after curing.

Resiten® LEM400 laminates are extremely durable, lightweight, and moisture resistant. they are available in sheet, strip, block, and fabricated parts.Applications are Military Service and Industrial Applications.

RIGIDDI-PAK R-4525 SeriesA general purpose series of low viscosity, strong, potting and encapsulating compounds. DI-PAK R-4525 has excellent electrical insulating properties and bonds well to many substrates. By varying the curing agents, the desired cure and working life can be obtained.