Products in Polyesters

Cosmic Alkyd 3D36 is a specialized alkyd molding compound that incorporates long glass fibers for enhanced impact resistance and flame retardant properties. Supplied in flake form, it is designed for ease of use and versatility in molding applications. This compound molds readily using standard compression or transfer equipment, and it maintains its performance for up to one year when stored at temperatures of 100°C or below. Its unique blend of properties makes it suitable for applications that require both impact resistance and flame retardancy.

Cosmic Alkyd 3D94 is a mineral-filled polyester molding compound that is available in sheet form. This compound is designed for ease of use in molding applications and can be readily molded using standard compression or transfer equipment. It offers good moldability, making it suitable for a range of applications where a combination of mechanical strength and cost-effectiveness is desired. When stored at temperatures of 50°C or below, it has a shelf life of six months, providing flexibility in manufacturing and storage.

USP-EAGLE (GP180-65) is an Unsaturated Polyester resin non-accelerated, non-thixotropic, excellent wetting of filler and low shrinkage.It is used in casting application for sanitary ware.

USP-EAGLE (PIP50-60) is an Isophthalic based Unsaturated Polyester resin with high mechanical & chemical resistance.

USP-EAGLE (GP35-55) is an Unsaturated Polyester resin non pre-accelerated, thixotropic, very good adhesion to acrylic sheets, good wett-ability, and low viscosity.It is used in a spray, hand lay-up, glass fiber reinforced back lamination for sanitary ware.

USP-EAGLE (BU130-70) is Unsaturated Polyester resin with good flexibility, high translucency, non-accelerated and non thixotropic. It is used in manufacture of buttons by centrifugation and casting rods procedures.

USP-EAGLE (GP25-65) is Unsaturated Polyester resin non-accelerated, non-thixotropic, light color and low viscosityit is used in general-purpose & glass fiber lamination.

USP-EAGLE (GP20-62) is Unsaturated Polyester resin non-accelerated, non-thixotropic, light color, rigid film, and low viscosityit is used in glass fiber lamination for general purpose applications.

USP-EAGLE (GP30-65) is an Unsaturated Polyester resin non-economic slight dark color with good chemical resistance.It is used in glass fiber lamination and general-purpose.

USP-EAGLE (RS18-65) is Unsaturated Polyester resin with high clarity, very good transparency as the refractive index of cured resin matches that of E-glass fiberit is used in the manufacturing of roofing sheets by continuous lamination.

USP-EAGLE (PIP40-42) is Unsaturated Polyester resin ortho based, very good mechanical properties, low viscosity, medium reactivity, and good rigidityit is used in filament winding, hand lay-up in pipe manufacturing.

USP-EAGLE (GP60-65) is Unsaturated Polyester resin pre-accelerated, thixotropic and excellent adhesion to acrylic sheetit is used in a spray, hand lay-up and glass fiber reinforced back lamination for sanitary ware.

Eagle Chemicals USP-EAGLE (PIP40-62) has ortho-based, very good mechanical properties, low viscosity, medium reactivity and good rigidity. Filament winding and hand lay up in pipe manufacturing

Sino Polymer MFE 707N is epoxy vinyl ester resin is a brominated novolac-epoxy based vinyl ester developed for the application where need both corrosion resistance and high temperature resistance with excellent fire retardance.

Ares P106 is orthophthalic resin with medium-low reactivity and good elongation. Peak controlled. The wettability of the fillers is excellent.

Ares P308 is extremely flexible resin with low styrene content and low exothermic peak.The cross-linked resin is soft and dry to the touch. It is particularly suitable for the production of abrasive cones suitable for abrading particularly fragile and delicate surfaces.

KPR 6100 by Kemrock Industries and Exports is a general purpose, orthophthalate-based unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6100 is used in laminations.

RALUPOL® UP 4566 molding compounds are characterized by excellent dimensional stability with very low processing and post-shrinkage. Due to their high rigidity and excellent heat resistance, RALUPOL® products withstand short-term heat loads. They have excellent electrical insulation and dielectric properties, which are retained even with long-term use at high temperatures. The reason for this is high tracking resistance (CTI> 600 V), arc resistance, glow wire test (GWFI 960 ° C) and a high electrical RTI (relative temperature index) of 170 ° C according to UL 746 (IEC 60216 / T1).

KPR 6200 by Kemrock Industries and Exports is a general purpose, orthophthalate-based unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6200 is used in boats and marine applications. Approved by Lloyd’s Register of Shipping.

KPR 6410 by Kemrock Industries and Exports is an orthophthalate-based unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6410 is used in roof lights.

Siropol DE-33C resin is low viscosity, high reactivity, general­purpose, and unsaturated polyester resin. The raw materials used in the manufacture of this resin are listed as acceptable in FDA regulation Title 21 CFR 177.2420” for repeated use in contact with food subject to user’s compliance with the prescribed limitations of that regulation.

Depol Т-810 is a non pre-accelerated unsaturated thixothropic polyester halogenated resin based on chlorendic anhydride. It is formulated for hand lay-up as well as for spray-up, RTM-technologies.

ATTSHIELD 41 is a bisphenol epoxy vinyl ester resin that resists corrosion in acidic and moderately alkaline environments. This tough, high strength resin can be used to make fiberglass reinforced laminates with excellent impact resistance, and it is ideal for winding applications that require resistance to harsh environments and thermal cycling. This resin has excellent wettability and curing properties as well.

Polipol 3455 is an orthophthalic based, low reactivity, medium viscosity, general purpose polyester resin. It is designed for artificial marble and casting applications.

Vikram Resins and Polymers VRP 2112 is a medium reactive superior grade Orthophthalic Acid based Unsaturated Polyester Resin. It has low viscosity, good wetting, good mechanical properties, and is fast curing. VRP 2112 is suitable for hand lay-up, RTM, and other molding applications and can be supplied as a pre-accelerated, thixotropic, or low viscosity resin.

Ares P100 is orthophthalic resin with good reactivity, good elongation, versatile for all sectors. Good mechanical characteristics, compatibility with glass fibers and good wettability of the fillers. Clear resin ideal for spray up.

RALUPOL® UP 2200 molding compounds are characterized by excellent dimensional stability with very low processing and post-shrinkage. Due to their high rigidity and excellent heat resistance, RALUPOL® products withstand short-term heat loads. They have excellent electrical insulation and dielectric properties, which are retained even with long-term use at high temperatures. The reason for this is high tracking resistance (CTI> 600 V), arc resistance, glow wire test (GWFI 960 ° C) and a high electrical RTI (relative temperature index) of 170 ° C according to UL 746 (IEC 60216 / T1).

SIROPOL 7440 resin is medium viscosity, excellent fiber wet­out and resilient polyester resin. The raw materials used in the manufacture of this resin are listed as acceptable in FDA regulation Title 21 CFR 177.2420 for repeated use in contact with food subject to user’s compliance with the prescribed limitations of that regulation.

KPR 6300 by Kemrock Industries and Exports is a superior general purpose, orthophthalate-based unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6300 is used in FRP composites.

Resin-SA Pty Ltd RES CR002-U-N-A appears clear and it is fast curing casting resin.

SIROPOL 7130 resin is a high viscosity, non­promoted, chemical and water resistant, Neopentyl Glycol Isophthalic Resin.