Products in Lubricants & Oils

Molydal HR 320 AL is an extreme pressure mineral oil with an EP oil base, phospho-sulphured without lead and anti-wear additives. Which reinforced chemical stability and resistance to oxidation for severe conditions (pressure, temperature).

Clareguard BioMarine WR NLGI 2 is a high performance wire rope dressing lubricant manufactured from biodegradable, renewable and nontoxic components.

Gandhar Oil Refinery India 680H SPL are high performance extreme pressure gear oil primarily designed fir heavy duty gear oils, primarily designed for heavy duty gear boxes, these gear oil has got extreme pressure properties along with antiwear property to enhance performance level.

PerFluid® Extreme is a polyolester based high temperature lubricant fortified with PTFE.

Valvoline ANTI-WEAR HYDRAULIC OILS VG 68 have high viscosity index, chemically stable, good quality mineral base oils which have been further fortified with anti- oxidant, anti-corrosion, anti-wear and anti-foam additives.

Amerilube® SERIES SS- A4000C lubricants are petroleum base fluids with a synergistic blend of additives designed to provide good performance in air compressor applications. Service life of 4,000 hours can be expected under nor- mal operating conditions. American Synthol's new formulation provides better viscosity stability over a wide range of temperatures.

H & B Industries HB-1150 HyGuard AW Hydraulic Oil ISO GRADES 22 is blended from highly refined paraffinic base stock oils and selected additives to provide an oil suitable for a wide variety of hydraulic applications. It is available in various ISO grades, all with excellent low temperature flow characteristics and high viscosity indexes. It offers maximum performance with no gumming or hardening of seals. It is blended using base stocks which have excellent resistance to emulsification and high resistance to foaming.

Lubriplate® GPO Motor Oil SAE 10W-30, Motor Oil is an engine oil developed for use in four-stroke cycle diesel engines designed to meet 2007 and later EPA on-highway exhaust emissions standards. It is specially formulated to protect exhaust after treatment devices such as diesel particulate filters (DPFs), diesel oxidation catalysts (DOCs) and selective catalytic reduction (SCR) systems. It is backward serviceable for use in pre-2007 diesel engines and may be used in mixed fleets with both diesel and gasoline-fueled vehicles.

SILWA® BOND 1019 is water based formu-lation of different polymers.

TURBEX 46 is a high performance multipurpose mineral turbine oil which is produced from high quality mineral base oils and several kinds of special additives.

Blue Grass Chemical DRAWLUBE 120 is a water-soluble, non-staining lubricant for stamping carbon steels, aluminum, copper, and brass. It dissolves instantly in water and cleans in hot water without the use of detergents. There is no sulfur or chlorine in this product. Mineral oil and chlorinated solvents do not dissolve it.

Aztec Oils Limited MOULD OIL 150 is a mineral based mold release oil suitable for use on metal and timber frame work. Forming a release layer between the setting concrete and mold, its viscosity allows for an excellent product finish utilizing both metal and timber frame work. The fluid is designed to preserve the timber and prevent corrosion of the metal.

IADA 7 Speed ATF 236.14 is a 100% synthetic, high-performance lubricant for automatic transmissions of mixed cars fleet. It offers a good protection and lubrication to the automatic gearbox.

David Weber Oil Universal Tractor Fluid represents a new generation in hydraulic/power transmission fluid performance. This product provides outstanding service in gears, pumps, differentials, final drives, bearings, wet brakes, transmissions and PTO (power takeoff) clutches.

Consultant Lubricants 3225 Food Grade Lubricant is a proprietary formula designed to replace petroleum wax when used in food grade electrostatic lubricant applications. It is formulated for use in operations including shell, draw/redraw, or when converting shells to “full pull” easy open ends. This product is liquid at room temperature and easily accepts (and holds) a charge to provide atomized particles the greatest velocity and adhesion to the substrate.

Agrinol UTTO 85W is universal transmission-hydraulic oil (universal tractor transmission oil), which applied in combined driving gear (transmission/ hydraulic), including hydraulic (“wet”) brakes of tractor vehicles (agricultural, roadbuilding and other special technics). It is possible to use the product in different hydraulic mechanisms. Special additives provide noiseless operation of power unit.

Pennwhite LTD Prodet X317 is a graphite heat-resistant lubricant.

MILLERMATIC ATF DM is a premium automatic transmission fluid technology blended into selected synthetic base fluids.

Solution 1800 Aluminum Copper Antiseize is a general purpose antiseize formulated with copper, aluminum and graphite in a high-quality grease. This silver color antiseize protects parts from corrosion, rusting, galling, and seizing. Eases assembly and disassembly of metals parts. Lubricates bolt threads while reducing friction and wear.

Amerilube® SERIES 8-A468 is a ultra-duty compressor lubricants which is formulated from polyol ester (POE) base stock and a synergistic blend of additives designed to provide excellent performance in rotary screw compressors operating at high temperatures.

Cor-Ban® D-5026NS is a water displacing, thin film, corrosion preventive used for avionics and cables.

H & B Industries HB-1160 Starfim E.P. Gear Lube Straight Viscosity SAE Grades 90wt is a premium quality multi-purpose gear lubricants which provide superior performance that is obtained through the use quality base oils and a select extreme pressure additive system. These additives impart anti-weld, anti-scuff and anti-wear properties that are necessary in heavy duty service gear lubricants. HB-1160 STARFILM provides excellent protection under the most severe conditions encountered in commercial transmissions, axles and final drives.

RichardsApex V-40 oils have gained wide acceptance where minimal lubricity is required and a controlled residual film is desired. Products are available for use on ferrous, nonferrous and alloy metals. RichardsApex has specialized in custom formulating evaporating oils and solvent base lubricants for many years.

77 Lubricants Motor Oil SN 5W-20 is high-performance fuel-conserving engine oil based on 100% synthetic technology for all gasoline engines in passenger cars and light vans. It is specially designed for the lubricating of the latest generation vehicles like hybrid and ECO models which require an SAE 5W-20 and run on gasoline and/or ethanol-containing fuels up to E85.

Chemicals Global Compresyn® HD PTS ISO 46 - Compressor Oil is made using high-quality mineral base-oils in order to provide greater lubricity for single-and two-stage air compressor applications. Formulated to provide extended hour drain intervals, they reduce fluid- and labor-related maintenance costs while providing enhanced equipment protection for the use in the upper cylinders and crankcases. These oils are used in compressors with high levels of ingestible contaminants or contaminant issues and are designed specifically for two-stage compressor applications. They have drain intervals of over 1,500 hours in properly maintained equipment.

Aegean Marine Petroleum Velox Premium S 15W-40 is high-quality multi-type gasoline and diesel engine oil. It is the high technology of synthetic additives that ensures all the lubrication requirements of conventional or turbo-catalytic and injection gasoline and diesel engines. It provides high engine protection while at the same time ensuring fuel economy.

UNI-PRO FRAC TAC 101 is a heavy-duty petroleum oil-based gel designed for use in oil field fracking pumps. This product has been formulated with highly refined severely hydrotreated oils, lubricity polymers and extreme pressure additives. The combination of additives provides excellent plunger life and pump performance.

Agrol Lubricants Hydraulic SH 68 is a hydraulic oil of very high quality intended for hydraulic systems in vehicles, construction, agricultural and forestry machinery. It can also be used for stationary hydraulics in industry. Especially suitable for mobile hydraulics that work under high speed and under high pressure in very varying temperature conditions.

Panolin BIOTRACK E (54918) is an environmentally friendly oil for lost-oil lubrication systems that is based on renewable ester. Excellent emergency running properties, even in thin-film conditions.

Getsome 1000® is Long Lasting, Non static, non toxic, non staining, non conductive, it will not dry out, gum up or turn gooey, non halogenic, non carcegenic, LOW VOC, NO CFCs, safe on plastics, metals, points, enamels, fiberglass, NO Residual Petroleum Odor.

DeoxIT® Shield S5L Liquid is a metal surface lubricant and protector. Oxidation and corrosion inhibitor. Improves conductivity and maintains optimal signal quality. DeoxIT® Shield also reduces wear and abrasion, arcing, RFI, and intermittent connections, and improves connector performance/reliability. Ideal for harsh environments. On oxidized surfaces, pre-treat with DeoxIT® D-Series contact cleaner. Temperature range: -34°C to +210°C.

Accor® ECOSYNN C2 0W30 is a high performance fully synthetic 4 stroke motor oil developed for last generation Passenger cars engines (particularly for Peugeot, Citroën, Toyota, Honda, Nissan and Subaru engines), equipped with post Treatment systems (particulate filters, 3-way-catalysts).

Cadlube Rust & Oxidation Oils ISO VG 32 are manufactured from highly refined paraffinic base oils. They contain oxidation, corrosion and foam inhibitors. These oils have excellent oxidation stability, corrosion protection and carbon buildup tendency. They come in viscosity ranging from ISO VG 32 to 680.

Clarion® Food Machinery Gear Oil 460 is formulated with a high-purity white mineral oil and additive system for food processing applications. It is designed for use in food machinery worm gears, spur gears, and valves.