Brands in Protective Coatings

Duralar Technologies provides the advanced deposition systems that apply our unique Duralar hard coatings, and these systems are designed to be installed in volume-production customer facilities. Through select Duralar-licensed partners, we also provide Duralar-coating services for certain applications.

Geomet® is a water-based zinc flake basecoats that defend against corrosion. This is completely chrome-free and capable of protecting a wide variety of metallic surfaces, these thin dry-film basecoats are well suited to coat any metal part with simple or complex geometry, both large and small.

IsoClear is a tough yet flexible, transparent coating that forms a protective barrier on roofs to resist ultraviolet (UV) penetration that typically causes color fading and deterioration.

OPTOACE WP 140 is a distinctive fluorochemical coating solution that has excellent moisture proofing properties. It can be easily and instantly applied on high quality PCBs to prevent damage from moisture.

Blygold is the specialist on corrosion protective, energy saving and lifetime extending products and services for HVAC/R equipment. With over 45 years of experience, we are a respected and liable partner for Building owners, Facility Managers, Contractors, Manufacturers and end-users dealing with HVAC/R equipment in corrosive environments. We operate a global network that is represented by over 75 companies in more than 60 countries worldwide. Our global headquarter is located in the Netherlands and we have regional headquarters in the USA (Florida) and Australia (Queensland) from where we support our valued partners.

Odourless non-toxic curing agent sets up in under 10 minutes and cures completely in 3-6 hours at typical room temperature.

WoodYouth® is a state-of-the-art and unique  blend of high-performance dimensional stabilizers used to protect wood products from moisture changes that may impact the intended physical properties.

ROOFDX GOLD is an extremely tough, rubber-like, waterproofing coating that has a stunning golden finish with exceptional elasticity. This remarkable “liquid gold” coating can be used over all common roofing substrates and will give a golden, metallic, rich luster to the roof at a fraction of the cost of gold leaf. ROOFDX GOLD may be sealed with a topcoat of CLEARCOAT 44 to provide an extra shiny, brilliant appearance and preserve the bright finish otherwise a natural patina will develop in time.

DIAMONDSHIELD® is Diamonex’s patented water-clear coating for plastics. DIAMONDSHIELD® has an unmatched combination of wear resistance and optical clarity. These thin (∼5 µm) film coatings provide greater abrasion resistance than that of a typical glass surface.

Abothane 8003-3™ Protects wood, concrete, and seamless floors anywhere a clear, tough coating is required. High gloss. Abothane 8003-3 is designed for high flexibility and abrasion, chemical, and corrosion resistance with high wear and slip resistant properties. Practically colorless, it looks great on most floors. Requires no waxing. Perfect consistency for sealing porous surfaces.

Tricolit® is a sprayable solution that is heat cured into a hard coating, resulting in reduced frictional losses and wear on various surfaces. It is a versatile product that can be used alone or in combination with other coatings in order to optimize the characteristics of the material. We have a license based business model, and our clients are component manufacturers that have implemented our technology in their manufacturing processes. By doing so, they can add value to their clients by delivering improved properties in terms of reduced friction and wear, all at a competitive price.

Duromar pioneers in the field of applied polymeric technology. It offers a wide variety of zero VOC, 100% solids materials for use in a broad spectrum of industrial applications. It manufactures rebuilding, resurfacing, and specialty products for industrial maintenance; concrete repair and flooring systems; high performance linings for the severest corrosive and abrasive environments; and structural adhesives. Its production facilities and quality control procedures are continually being upgraded to provide “state of the art products” to meet today’s stringent standards for quality and performance.

Endcor® Corrosion resistant coatings include silicone alkyd, thermo setting epoxy,inorganic zincs, acrylic urethane, water borne silicone, coal tar epoxy, elastomeric, cold galvanizing compound.

SW-244-40 VOC is a DOT grade clear, penetrating 40% alkylalkoxysilane water repellent designed for the protection of exterior above-grade concrete, brick masonry. It penetrates the surface and bonds chemically to the substrate, resulting in permanent attachment of the water repellent molecule. SW-244-40 VOC is not a coating and as a result will not discolor or change the surface appearance in any way.

aquaticLIFE™ coatings virtually eliminate all the problems of traditional cementitious, fiberglass and painted surfaces. These coatings can be applied to new or remodel aquatic surfaces to provide a beautiful, long-lasting finish that will not mottle, chalk, peel or blister.

Aqua-Gard™ is a clear, water protection product for new and existing above ground concrete and masonry substrates. Unlike regular water repellents, Sansin Aqua-Gard penetrates and bonds to the substrate allowing it to breathe while protecting the concrete and masonry from water and contaminants entering the substrate.

XL2000™ is designed as a unique internal and external ceramic coating system for the most intense heat shielding barrier, withstanding temperatures up to 2000°F. XL2000™ extreme temperature coating is engineered especially for turbos, high performance diesel and racing applications and is designed to be applied primarily to exhaust components. Its properties will remain color stable and stain resistant at exhaust gas temperatures up to 2000°F. Due to its unique ceramic nature, the coating also functions as a very effective thermal barrier, with reduced thermal radiation characteristics. The coating cures to a very hard, durable surface with excellent adhesion.

Our “professional” series, Revere Interior Acrylic Finish provides a long-lasting, durable, and protective finish for interior wall, ceiling, and trim surfaces. Performance benefits include advanced hide, low odor, superior touchup, lasting protection, easy application, and soap and water cleanup. Revere dries quickly with no unpleasant odors while retaining its decorative sheen and color for the life of the paint. Available in flat, eggshell, satin, and semigloss finishes.

Trowel Rubber material is an asphalt emulsion material modified using exact formulated polymers providing unique elastomeric performance. This product is engineered to assist in achieving a seamless, monolithic membrane that is best suited where cracks and or voids are present in excess of 1/8”. In the case of expansion or cold joints it will not only seal but allow movement do to its elastomeric properties. Trowel Rubber for use in preparing the substrate before Roller Brush or Premier Rubber Membrane® is used is recommended as all products bond to one another.

SILVER FILM is a single component, liquid applied, bright aluminum solar reflective coating that will maintain its reflective qualities for many years. It is a high solids, thermoplastic resin based product that maintains superior adhesion to most metals as well as asphaltic, or coal tar pitch roofs. SILVER FILM is highly effective for either pitched or flat surfaces where ponded water conditions occur. SILVER FILM is significantly different to other aluminum colored roof coatings. It contains no asphalt, no fillers and uses high quality automotive grade flake pigment. At 3.5 pounds of aluminum metal flake per gallon it produces a layer of protective metal composite that can provide 7 to 10 years of protection in a single coat.

Type 5EF is a cementitious fireproofing material in the standard density group as defined by industry practice. It is specifically designed for protection of electrified floor deck designs as listed by Underwriters Laboratories.

Deliver high quality, bright, clean lumber by using BRITEWOOD® XL Sapstain Control. For more than 20 years, BRITEWOOD XL has protected fresh-cut hardwood and softwood lumber from damaging mold and fungi growth. BRITEWOOD XL is a broad-spectrum fungicide that is easily applied to freshly cut lumber by dipping or in spray box application. It quickly penetrates and binds to wood, allowing for a more uniform distribution throughout the lumber.

Carbon Raptor® DLC Coating is thin and flexible, but also tough as nails. It’s the perfect combination for high-performance engines as well as Industrial, and medical applications. By reducing friction, we can help extend the lifespan of your product.

Nycote® also provides excellent high impact, abrasion resistance, flexibility and toughness. Nycote® to substrates that need protection from corrosion, electrical conduction and friction.

Imper-Sol Premium Roof Coatings are a the ultimate fluid applied roof preservation solutions.