Products in Top Coats

Prokol Protective Coatings ProFast Topcoat 70-C is an autocatalytic, low-solvent topcoating based on polyurea combinations. This topcoat can be used for in- and outdoor applications. It is ideal for walkways, balconies, terraces and stairwells. It also can be used in warehouses, distribution centers and production facilities.

Novolak VEGlaze 472 is a coating used for the chemical-resistant construction of sumps, ducts, containment areas, trenches, walls, and other support columns or bases. VEGlaze may be used as a thin barrier of corrosion resistance or as a topcoat for other Sauereisen vinyl ester linings and polymer concretes. The VEGlaze system utilizes Sauereisen VEPrime No. 550 as a bond enhancing primer.

Permalac SR is a scratch-resistant, low-VOC, clear top coat.

Pison Stream Solutions PCC19003-A is a robust transparent platform for enhancing the flow properties of protective automotive coatings.

Onyx Concrete Coatings Epoxy Flex (Top Coat) is a flexible two component, high performance, cycloaliphatic, 100% solids, urethane modified epoxy overlayment and coating system. Its epoxy chemistry provides excellent bonding characteristics with the additional advantage of flexibility.

DynaSpec® N-8055A/H2OB - MIL-DTL-64159 Type II is two component waterborne polyurethane chemical agent resistant coating (CARC) is intended to provide surfaces that are easily and effectively decontaminated after exposure to liquid chemical agents. It may be used in areas where VOC and VOHAPS are regulated. This Chemical Agent Resistant Coating meets MIL-DTL-64159 Type II and provides both visual and infrared camouflage to military vehicles and equipment.

Trupofin® Lacquer ET 60N is a nonflammable nitrocellulose lacquer water emulsion. It can be diluted in water at any proportion.

EnergyGuard Butyl Roof Coating is a solvent-based, vapor barrier roof coating. Useful for coating spray foam roofs on cold storage applications.

Novochema Synth 4400 is a synthetic coating for metal (structures, machines, fences), wood, silicate substrates (plasters, concrete). It can be used both outdoors and indoors.

Protective Industrial Polymers PIP 1000 FS are a two-component or three component (with color packs), universal, 100% solids, epoxy resin coating systems that can be applied either clear or pigmented. PIP 1000 has a universal, clear unfilled “A” component (1000-A) and is supplied with a choice of curing agents to achieve specific cure rates, chemical resistance requirements and final esthetics. This product produces a gloss finish.

Accoat A/S Accowear is a reinforcement consisting of a porous, wearresistant layer of stainless steel. The Fluoroplastic topcoat fills out and covers the porous metal-layer. The metal gives the wearresistance while the Fluoroplastic top layer provides the non-stick and low friction properties of the specific coating. For example ACCOWEAR+ACCOLAN W98 will have the same properties as ACCOLAN W 98 (see separate data sheet) but at the same time an excellent wear-resistance.

Schwartz Chemical H₂O Premium Water Based Satin and Semi Gloss Finishes 81C50 - Semi-Gloss H₂O Premium Polyurethane is a high performance single component (1K) polyurethane finish. Schwartz Water-borne Finish provides a hard and durable topcoat suitable for high traffic areas. Packaged as a convenient single component formula eliminates pot life restrictions and wasted material. Safe to handle, non-flammable and non-toxic for ease of handling.

Hempatop Repel 800 is a two component advanced water repellent polyurethane coating. The system offers exceptional anti-corrosion protection, robust mechanical properties, and ease of application.

KM Acryl 85 is a high tensile, superior grade water-based elastomeric coating with a solids content of 51% on average. Specifically designed to meet or exceed ASTM D6083 Types I and II physical property requirements. This proprietary formulation, made entirely of acrylic resins, cures into a seamless fluid-applied roof membrane. This product adheres well to polyurethane foam and a variety of other construction and roofing substrates, and its tensile strength can exceed that of typical acrylic roof coatings. This product is extremely durable and resistant to dirt pickup.

LOPH II (CLEAR) is two-component low-odor poly aspartic-polyurea clear. This low viscosity, zero solvent, easy to handle product combines extreme chemical, abrasion and UV-resistance with fast-cure properties. The product is ideal for exterior or rapid turnaround installations in temperatures as low as 20˚F.

W-R Industries UV-5045 is a semi UV coating.

Novochema Synth 5400 is a synthetic coating for metal (structures, machines, fences), wood, silicate substrates (plasters, concrete). It can be used both outdoors and indoors.

Rokoemail S 2013 ČSN 8140 is a gloss topcoat available in 24 basic tinted colors ready for immediate use.

Schwartz Chemical H₂O Premium Water Based Satin and Semi Gloss Finishes 81C30 - Satin H₂O Premium Polyurethane is a high performance single component (1K) polyurethane finish. Schwartz Water-borne Finish provides a hard and durable topcoat suitable for high traffic areas. Packaged as a convenient single component formula eliminates pot life restrictions and wasted material. Safe to handle, non-flammable and non-toxic for ease of handling.

PERMATEC 4000 HT is a 100% solids epoxy floor topping designed for high temperature applications commonly found in many manufacturing processes. PERMATEC 4000 HT is designed to withstand constant temperatures to 212°F (100°C) and intermittent exposures to 250°F (122°C). The PERMATEC 4000 HT system consists of a two component resin binder and graded aggregate. It is applied with a trowel or screed rake at 1/8 -1/4 inches (125-250 mils) in a one coat application including a silica broadcast. There is no need for a primer or sealer coat. An optional glaze coat may be used to improve the appearance and cleanability. Where chemical exposures over 150°F are anticipated, contact ChemProof Polymers for specific recommendations. The vertical formulation of PERMATEC 4000 is trowel applied at 1/8 inches (125 mils).

ITC -296A Ceramic Top Coating is a high purity ceramic top coating that resists deposits from firing gasses and contact with molten metals to provide a clean firing. This clean firing minimizes impurities in gloss kilns and molten metal operations while increasing energy efficiency as the heat is reflected back into the furnace or melt. This reflection results in higher temperatures, lower fuel cost, and shorter process times. ITC-296A Ceramic Top Coating also aids in the reduction of contamination from previous firings and byproducts. The coating is typically used as a top coat and applied over a base coat of ITC 100, 200EZ, or 213. Pneumatic spray gun available for ease of application.

Racine Flame Spray RSC-C250 belongs to a family of high release coatings. The RSC coatings have a clear silicone topcoat with excellent release, but lower wear resistance than the gray coatings and the base material of RSC-C250 is ceramic.

Eagle Bridges Marathon Chassis Guard 5159 is a Low Gloss Black, water-based, quick-drying, non-flammable direct to metal (DTM) asphalt-derivative protective coating. It is designed to aid in resisting the effects of corrosion and moisture and can be applied to steel or concrete.

POLYSPORT 952 SEMI-MAT-Polyurethane top coat is a polyurethane, two-component, solvent-based, semi-mat, finish aliphatic coating for indoor sports surfaces.

FINIGARD 111 is a specially formulated organo-mineral liquid concentrate. It is used to impart increased corrosion protection and torque tension modification to parts processed with COVENTYA FINIDIP or LANTHANE conversion coatings. Developed to meet the demands of the automotive industry, FINIGARD 111 protects Zinc and Zinc alloy finishes against corrosion in a variety of environments. The process is suitable for bulk electroplating applications and can be used in conjunction with hexavalent chromates or trivalent passivates.

Gel Coat Isoftalico 107311P is the isophthalic gel coat developed by italbeit are able to provide excellent product performance regarding weather resistance and corrosion resistance. They can also be supplied in a self-releasing version, to facilitate the release operations from the mold, or waxed, to improve surface drying when not working against the mold but directly on the product.

Williams Hayward Protective Coatings Aqua-Epoxy Waterborne (2K) Dispersion is waterborne dispersion two-component epoxy-copolymer with dehydrated V.O.C. range of 1.4-2.3, for use as a primer-topcoat or direct-to-metal paint. Has an initial gloss of 85- 90% (60 deg. head) with good depth of image. Possesses excellent gloss retention, far superior to standard solvent borne epoxies. Aqua-Epoxy also has good chemical and corrosion resistance.

Trupofin® Black Lacquer O-B is a black pigmented and plastified nitrocellulose in a organic solution.

Monochem 45 is a two-component, high solids, self-leveling epoxy-cycloaliphatic amine. For added decorative and safety options, you can broadcast plastic chips, color micas, metallic pigments, color quartz, silica sand and other aggregates. It is designed as a high performance primer, base or interior top coat.

ILLUSTRIUM™ M1172 DTM is a zero VOC, light stable, high-gloss, fast-curing one step coating. It is ideal for OEM and refurbish painters who desire unmatched productivity and environmental compliance for the foreseeable future.

Zeller International Intumescent Paints 183 is a unique coating that forms an insulative, crusty char when exposed to heat and fire, puffs up instantly to form a foam-like, protective cellular shield.

Excel-Poxy 128 is a two-component, pigmented epoxy top and seal coating that is 100% solids. Used on industrial floors and in conjunction with the Garage Floor Vinyl Chip system.

ConoGlaze™ Chemical & Food 202 is a chemically-resistant, 100% solids, epoxy coating system. It is used as a topcoat for Sauereisen ConoCrete or FibreCrete systems or as a coating to protect concrete and steel from chemical attack.

6502 - Advanced Ceramic Shield is a waterborne topcoat, based on acrylic and polyurethane dispersions. WearMax Advanced Ceramic Shield 6502 dries clear and performs with excellent hardness, toughness and stain resistance.

Consolidated Coatings Acrylic Urethane Clear 52-2200 is a top quality two component acrylic urethane. easy to apply this, acrylic urethane provides excellent environmental resistance to, corrosion, abrasion, chemicals and impact. outstanding gloss and, color retention are shown on exterior exposure.