Products results

LAPOX® AH-313 is a light-yellow aliphatic polyamine hardener suitable to cure epoxy resin at ambient temperature. When cured with epoxy resin it provides short pot life and faster cure speed. Due to very low viscosity and low dosage, it finds suitable for applications like adhesive, mortar and casting of small electrical components.

Berolan LP-W1HD is pure sodium lauryl sulfate, comparable to LP-W1, but with a higher bulk density. Due to its strong foaming properties, it significantly reduces surface tension and also acts as a wetting and plasticizing agent. Used as an additive in various mortar mixtures, ready-mix plasters and filling compounds, it forms a fine, stable system of air voids. Berolan LP-W1HD is suitable for applications based on plaster, lime, or cement. Its other advantageous characteristics include that it increases frost resistance and reduces susceptibility to shrinkage, cracking, and efflorescence. The dosage of LP-W1HD depends on the desired result and can vary between 0.005 – 0.1%, based on the dry mix. Since the introduction of air is also influenced by the machine equipment, the latter needs to be taken into account as well.

EXOdis PC540i is an anionic polymer dispersant of hydrophobic nature. It is supplied in the form of a clear or lightly murky colorless aqueous solution with 25% of sodium salt. The product is intended for the use in paint products. In comparison with other dispersants of hydrophobic nature, EXOdis PC540i has good dispersing properties, in particular with titanium white and mineral fillers.

Razeen® LR 1150 is a general purpose unmodified medium viscosity epoxy resin based on Bisphenol A. Razeen® LR 1150 yields excellent mechanical properties and resistance to chemicals, which can be modified within wide limits by using various hardeners and fillers. Razeen® LR 1150 is meets the relevant requirements of the FDA listing.

Synthel PE-3015 is solvent-free moisture curing prepolymer based on aromatic polyisocyanate.

Kamicryl 400 is a aqueous, plasticizer-free and anionic acrylic/styrene copolymer.

SILMIKRON® is for industrial use, mighty, workable silica sand deposits are of decisive importance. Nevertheless, chemical purity and constancy are not enough in order to apply silica directly as a raw material. In Quarzwerke plants silica sands are thoroughly prepared. The raw material has to pass exten-sive cleaning-, classification-, drying- and iron-free grinding processes in order to produce silica sands, flours and powders. For the production of silica flours and -powders with a defined grain size distribution separation processes are required in addition to iron-free grinding. Quarzwerke are able to produce silica powders with grain sizes down to 1 μm due to a fine-tuned combination of grind- and classification technology. Another refining step is the surface-treatment with silanes or silan-based substances which can be adjusted to the respective application.

CH Polymers CHP 510 is a universal Dispersion which contains Styrene Acrylic polymer containing 49 % Solids and is MIT Free.

KURARAY POVAL™ 6-88 by Kuraray is a polyvinyl alcohol (PVOH) having varying degree of polymerization and hydrolysis. It is a water-soluble polymer manufactured by alcoholysis of polyvinyl acetate. It is notable for its good bonding strength and pigment binding capacity because PVAs have such good cohesion and good adhesion to fibers, fillers as well as pigments. KURARAY POVAL™ 6-88 is used in a similar manner as natural products such as casein as well as starch and its degraded derivatives (for example dextrin) as raw material for the production of aqueous adhesive solution. In comparison to dextrin and casein it has the advantage of a more uniform chemical structure and greater adhesion, being obtained with minimum raw material requirements. It features water-solubility, excellent film forming characteristics, high tensile strength and elasticity, as well as resistance against organic solvents and dispersing power. For the modification of aqueous adhesives its aqueous solution can be added to polymer emulsions already stabilized with polyvinyl alcohol which affects the extension of the open time, increase of the setting speed and influence on the rheology. It is biodegradable and recyclable. KURARAY POVAL™ 6-88 is used in producing silicon base paper that are further used as release paper for PSA labels and also in remoistenable adhesives which are employed mainly in the paper processing industry, films applications.

Promex™ TCO is Exterior Dry Film Biocide. It is a VOC free combination designed to protect surface coatings from fungal and algal growth. Formulated as an aqueous dispersion of N'-tert-butyl-N-cyclopropyl-6-(methylthio)- 1,3,5-triazine-2,4-diamine (Terbutryn), 2-n-Octyl-4-isothiazolin-3-one (OIT) and Carbendazim. It is manufactured to the highest purity standards using modern dispersion technology techniques.

Promex™ OZP is a VOC free combination designed to protect surface coatings from fungal and algal growth Formulated as an aqueous dispersion of 2-n Octyl-4-isothiazolin-3-one (OIT) and Zinc pyrithione, specifically developed for interior use.

GlucoSol® 620 is a new entry in the Chemstar water-soluble product line. It is a highly substituted natural polysaccharide designed to impart enhanced functional properties including: solution stability, salt tolerance, surface activity, water retention, improved rheology and viscosity. GlucoSol® 620 offers a unique alternative to competitive natural and synthetic water-soluble polymers

Kumho P&B Chemicals KCA 2230 is designed for paint, adhesives, heavy duty coatings. grouting, mortar, flooring. etc. Each KCA series has different properties for the various demands. Epoxy curing agents are used to cure epoxy resins by reacting with the epoxide groups or by promoting self-polymerization of the epoxy by catalytic action. Application characteristics and final physical properties can be tailored by the choice of curing agent. Kumho P&B Chemicals offers epoxy curing agents for a wide variety of coatings applications.

Epilox A 18-00 is a low viscosity and solventless bisphenol A epoxy resin which may crystallize on storage.

Hydroxyethyl Methyl Cellulose (MHEC) is also named as Methyl Hydroxyethyl Cellulose (HEMC),used as high efficient water retention agent, stabilizer, adhesives and film-forming agent in kinds of building materials.is widely used in industrial applications ,such as construction, detergent ,paint and coating ,we also can provide HEMC according to customers requirements. After modified and surface treatment, we can get the goods which is dispersed in water quickly, lengthen open time, anti-sagging, etc.

Zeocem KlinoLime is a mixed binder. This product is intended for improvement, consolidation and stabilization of ground surfaces. Zeolite in combination with lime, portland clinker, gypsum and ground granulated slag creates a mixed binder. It is used to strengthen ground surfaces.

Kwark® GS is used as an additive / raw material and mixed in various formulations in order to improve key properties of the final product. Kwark® is available under several particle size distributions to match various applications.

BRIOMICA® 212 is a dry-ground ultra-white mica powder.

Poolkemie POLIMOLD TR 40 is a two component room temperature vulcanising poly-urethane rubber which cures with addition of the appropriate hardener. Once cured, this rubber becomes flexible and resistant, free from air bubbles and imperfections. It is suitable in the manufacture of molds for production of articles made of plaster and cement thanks to its accurate reproduction of fine details and due to its extremely low linear shrinkage.

Razeen® LR 1166 is a general purpose unmodified medium to low viscosity epoxy resin based on Bisphenol A. Razeen® LR 1166 yields excellent mechanical properties and resistance to chemicals, which can be modified within wide limits by using various hardeners and fillers. Razeen® LR 1166 is meets the relevant requirements of the FDA listing.

Hydroxypropyl MethylCellulose (HPMC) are widely used in construction, pharmaceutical,food, cosmetic, detergent, paints, as thickener, emulsifier, film former, binder, dispersing agent, protective colloids.We can provide the regular grade HPMC, we also can provide modified HPMC according to customer requirements. After modified and surface treatment, we can get the goods which is dispersed in water quickly, lengthen open time, anti-sagging, etc.

Hydroxypropyl MethylCellulose (HPMC) are widely used in construction, pharmaceutical,food, cosmetic, detergent, paints, as thickener, emulsifier, film former, binder, dispersing agent, protective colloids.We can provide the regular grade HPMC, we also can provide modified HPMC according to customer requirements. After modified and surface treatment, we can get the goods which is dispersed in water quickly, lengthen open time, anti-sagging, etc.

Berolan LP-W2 is a pure sodium lauryl sulfate that has been spray-dried particularly finely. Due to the particularly high fineness, an excellent distribution in dry mortar can be achieved. This also leads to a particularly high effectiveness. Berolan LP-W2 is a high-performance air-entraining agent and an excellent wetting and plasticizing agent for mortar and plasters. Berolan LP-W2 is an excellent foaming agent and plasticizer for the manufacture of ready-to-use plasters, mortar compounds, and filling compounds containing gypsum, lime or cement. Berolan LP-W2 effects the formation of particularly fine, stable air bubbles, thereby considerably improving the General performance of resistance, water retention as well frost stability. Tendency towards contraction and crack formation is also reduced as is wear and tear to mixing apparatus and conveyors. Due to its surface active character Berolan LP-W2 additionally promotes wetting of binders and other ingredients, thus entailing a swifter wetting and dispersion and reducing the tendency towards aggregation during mixing. The necessary quantity depends on the desired effect but generally is between 0.005 – 0.1 %, calculated on the dry mix. In the majority of cases 0.01 % proves sufficient to obtain adequate aeration. The equipment available must also be taken into account, where batch operated mixers generally feed more air into the mortar. Through the purposeful air entrainment the yield is significantly improved. A very quick wetting ensures less entry of coarse air pores and reduced nodule formation (dry spots/knots).

Razeen® LR 2257 is a low viscosity epoxy resin based on Bisphenol A modified with aromatic glycidyl ether.

Puranol D 210 is synthesized with propylene glycol, glycerin, and epoxide. It is used in polyurethane elastomers, adhesives, coatings, waterproof coatings, chemical grouting materials, shoe soles, and non-cellular polyurethane applications such as coating, adhesives, sealants and elastomers.

EXOdis PC40 is an anionic polymer dispersant intended for paint products. It is provided in the form of 40% aqueous solution of sodium salt of polyacrylic acid. The product is clear or lightly murky yellow liquid.

Sil-cell® 50 has been found to be cost effective in the manufacturing of joint compounds, adhesives, auto body putty, cultured marble, wall patching compounds, stucco, ready mix gypsum plasters, resins, plastics and a variety of other composites. It can also be treated with unique proprietary surface coatings to modify the particle’s surface. In both organic and inorganic composites, these coupling agents improve adhesion.

MILLISIL® is for industrial use, mighty, workable silica sand deposits are of decisive importance. Nevertheless, chemical purity and constancy are not enough in order to apply silica directly as a raw material. In Quarzwerke plants silica sands are thoroughly prepared. The raw material has to pass exten-sive cleaning-, classification-, drying- and iron-free grinding processes in order to produce silica sands, flours and powders. For the production of silica flours and -powders with a defined grain size distribution separation processes are required in addition to iron-free grinding. Quarzwerke are able to produce silica powders with grain sizes down to 1 μm due to a fine-tuned combination of grind- and classification technology. Another refining step is the surface-treatment with silanes or silan-based substances which can be adjusted to the respective application.

It is a two component room temperature vulcanising pourable fluid silicon which cures on the addition of the appropriate CATALYST B*, according to the polycondensation process. A highly anti-adherent flexible compound, that is extremely accurate in its reproduction of fine details.

Berolan LP 50 is a strongly surface-active air-entraining admixture and plasticizer. It has been developed especially for use in mortars based on gypsum, lime, or cement. It leads to a better plaster yield, to improved workability, and improves the wetting of the mortar. It decreases the wear of mixing units, the tendency to lumping, and the shrinkage. Irritation of the respiratory organs has been minimized. CE-Nr.: 1139-CPD-0802/09

OPTICRYL 2960 by OPTICHEM is a Acrylic Polymer Base. It has been Alkaline and Effloresence resistance Acrylic Binder.

Sil-cell® 32 has been found to be cost effective in the manufacturing of joint compounds, adhesives, auto body putty, cultured marble, wall patching compounds, stucco, ready mix gypsum plasters, resins, plastics and a variety of other composites. It can also be treated with unique proprietary surface coatings to modify the particle’s surface. In both organic and inorganic composites, these coupling agents improve adhesion.

Hydroxyethyl Methyl Cellulose (MHEC) is also named as Methyl Hydroxyethyl Cellulose (HEMC),used as high efficient water retention agent, stabilizer, adhesives and film-forming agent in kinds of building materials.is widely used in industrial applications ,such as construction, detergent ,paint and coating ,we also can provide HEMC according to customers requirements. After modified and surface treatment, we can get the goods which is dispersed in water quickly, lengthen open time, anti-sagging, etc.

Kumho P&B Chemicals KCA 2340 is designed for paint, adhesives, heavy duty coatings. grouting, mortar, flooring. etc. Each KCA series has different properties for the various demands. Epoxy curing agents are used to cure epoxy resins by reacting with the epoxide groups or by promoting self-polymerization of the epoxy by catalytic action. Application characteristics and final physical properties can be tailored by the choice of curing agent. Kumho P&B Chemicals offers epoxy curing agents for a wide variety of coatings applications.

SILBOND® is for industrial use, mighty, workable silica sand deposits are of decisive importance. Nevertheless, chemical purity and constancy are not enough in order to apply silica directly as a raw material. In Quarzwerke plants silica sands are thoroughly prepared. The raw material has to pass exten-sive cleaning-, classification-, drying- and iron-free grinding processes in order to produce silica sands, flours and powders. For the production of silica flours and -powders with a defined grain size distribution separation processes are required in addition to iron-free grinding. Quarzwerke are able to produce silica powders with grain sizes down to 1 μm due to a fine-tuned combination of grind- and classification technology. Another refining step is the surface-treatment with silanes or silan-based substances which can be adjusted to the respective application.

MAILOSE™ MP 150K is hydroxypropyl methyl cellulose ether(hpmc) with high viscosity. Could be soluble in water to form a transparent solution. Widely used in dry mix mortar industry.