Products results

Pangel J60 is a powder thixotropic additive, specially developed to act as an anti-sagging and anti-slipping agent. It improves system workability, suspension properties, and visual finish.It controls flow and consistency, ensuring optimal distribution of solvents, fillers, and other components.

Texicryl® 13-602 is a styrene acrylic copolymer emulsion designed for use in flexible fillers, caulks, sealant applications and architectural coatings. It enhances the workability and technical performance of many products. It meets all environmental demands, such as low VOC, APEO-free and formaldehyde-free with no compromise on quality and performance.

Texicryl® 13-078 is a styrene acrylic copolymer emulsion, designed primarily as a binder for high performance ceramic tile adhesives. It has been designed to be formulated with a wide range of filler types into water resistant tile adhesives and grouts.

Texicryl® 13-013 is a styrene acrylic copolymer emulsion containing a plasticizer. The product gives excellent adhesion on substrates and even at low temperature, the flexibility is good. It is suitable for paints, sealants, acrylics, highly filled putties and soft fillers applications.

Texicryl® 13-620 is an APEO free pure acrylic copolymer emulsion designed for use in the building and construction industry. The polymer offers improved adhesion to various substrates and superior elasticity to relevant mixtures. It is designed for use in flexible mineral sealings, crack-bridging systems, waterproof coatings, fillers, putties, polymer-modified cement and mortar based mixtures of all kinds.

Texicryl® 13-619 is a styrene acrylic copolymer emulsion designed for formulation of co-solvent free construction adhesives. It can be used in the formulation of high performance water resistant tile adhesives, fix and grouts and general purpose fillers. It meets all environmental demands, such as low VOC, APEO-free and formaldehyde-free with no compromise on quality and performance.

BD54750 is a low viscosity polyamine epoxy product. The BD54750 is designed for metals and plastics bonding. This product is ideal for highway and bridge deck repairs, potting, casting, and encapsulation, floor systems, linings of tanks and pipes, and coatings. This product has good chemical, corrosion, and water resistance. It is especially formulated for a 1:1 mix ratio for use in side by side cartridges, or to be used by hand mixing, or use with meter mix equipment. A handling cure is normally achieved at room temperature within 4 hours with a full cure at room temperature within 48 hours. To accelerate the final cure, or to quicken the handling simply elevate the temperature.

9200FR is a toughened, flame retardant, 2-part epoxy adhesive, designed to create long-lasting load-bearing joints. It creates tough vibration resistant bonds and is especially useful for joining dissimilar materials that will experience thermal cycling stresses or harsh environmental conditions. This smooth, non-sagging, thixotropic adhesive is excellent for use on vertical surfaces, for gap filling, and for potting electronics enclosures with gaps where a non-thixotropic encapsulant would flow through.

9200 is a toughened, 2-part epoxy adhesive, designed to create long-lasting load-bearing joints. It creates tough vibration-resistant bonds and is especially useful for joining dissimilar materials that will experience thermal cycling stresses or harsh environmental conditions. This smooth, non-sagging, thixotropic adhesive is excellent for use on vertical surfaces, for gap filling, and for potting electronics enclosures with gaps where a non-thixotropic encapsulant would flow through. For a flame retardant version, use 9200FR.

USP-EAGLE (SS7-70) is Unsaturated Polyester resin amine accelerated, high rigidity, high reactivity, and medium viscosity it is used as stopper for marble, adhesive for marble and highly filled knifing fillers.

BactiBlock® 920 B4 is an antimicrobial additive suitable to be used in a broad variety of materials such as paints & coatings or building & polymeric materials.

Vycel U is a low viscosity diluent of PU systems with excellent particle wetting. Excellent compatibility with Polyurethanes, Epoxy, Polyester and Phenolic resin systems.

BactiBlock® 101 R4.47 is an antimicrobial additive suitable to be used in a broad variety of materials such as paints & coatings or building & polymeric materials.

Vycel U-3000 is a low viscosity diluent, low odor and water-white extender.

C - EAGLE (PA 43/56) is pure acrylic for cement additive, joint fillers and sealing compounds with good adhesion to a wide variety of substrates. APEO freeExcellent flowability / Cement compatibility.

GA-EAGLE (THIX-9/50)50% is a Gel alkyd resin with high gel strength. Can be added to LOA and MOA to improve the workability.

Vycel EF is a viscosity-reducing diluent with very low color and a low odor level for Polyurethane and Epoxy systems. Vycel EF is very hydrophobic and is completely compatible with Epoxy, Phenolics, MDI, TDI and their Prepolymers

FluoroGrip® -Mx Membrane are stick fluoropolymer butyl lining for severe chemical and temperature resistance for concrete and steel substrates.

BactiBlock® In-can is an antimicrobial additive suitable to be used in a broad variety of paints, coatings, sealants and construction materials. This additive is specially designed to provide in-can preservation, that is to be used as preservative during product storage.

Protective Industrial Polymers PIP 125 ESD WR-GP is a two-component, waterborne, solvent free epoxy resin ground plane coating system designed to develop a uniform, non-tracking conductive ground plane to facilitate a consistent electrostatic discharge. When used in combination with PIP 100 ESD HB or PIP 170 ESD SR it produces lower surface resistance readings to meet the mandated requirements of ignition control applications.

Protective Industrial Polymers PIP 100 ESD HB is a high solids, three-component, high-build epoxy resin system designed to facilitate electrostatic control. PIP 100 ESD HB is supplied with a blended cycloaliphatic amine curing agent that exhibits good UV and chemical resistance. This product produces a durable gloss finish.

West System 404-B High-Density Adhesive Filler, 30 lb is an epoxy thickening additive. We developed it for maximum physical adhesive properties in hardware bonding, or anywhere that high-cyclic loads are anticipated. Blended with epoxy, it makes an excellent gap filler or structural filets. Use this filler wherever you need an especially strong bond. You can blend it into any WEST SYSTEM 105 Resin/20X Hardener combination, G/flex Epoxy 650, or G/5 Five-Minute Adhesive.

CurePerfect® 930 marks the latest step in the evolution of grouting systems for ceramic tile, marble and stone surfaces. It solves the most persistent problems encountered with traditional Portland cement-based grouts.

Boud Minerals Calcined Flint Minigrain is an acid insoluble filler / aggregate obtained by calcining gray flints.

IMPERVIUS™ ULV is a Ultra Low Viscosity, 100% solids, 2 component liquid polymer system, used as a penetrating crack sealer for reinforced concrete decks. Designed properties of surface tension and creep allow for this versatile polymer to penetrate and fill cracks. Also serves as a suitable treatment prior to application of polymer overlays.

Precision Epoxy Products SC-15P is a colored system formulated for use in machine shops for leveling a wide variety of applications from table tops to linear rail mounting platforms. The standard color is 'Black' but, it can be pigmented to a color of choice and is excellent for hiding substrate surfaces. It offers unparalleled adhesion to properly prepared steel surfaces without delamination. SC-15P is very durable, chemically resistant and is a poured application with advanced leveling characteristics for extreme accuracy. This version is pigmented to allow for additional de-air additives which makes this system a less technical application than the SC-15N.

West System 403-28 Microfibers, 20 oz is a fine fiber blend. Use it to thicken epoxy blended resin/hardener and create a multi-purpose adhesive. It’s most popular use is for bonding wood. Epoxy thickened with microfibers has good gap-filling qualities but will still do an excellent job of wetting-out/penetrating into wood fibers. You can blend it into any WEST SYSTEM 105 Resin/20X Hardener combination, G/flex Epoxy 650, or G/5 Five-Minute Adhesive. Blended with epoxy, it will cure to an off-white color.

Tekapur Universal (spray) has excellent sound and thermal insulation. It adheres well to the majority of building materials, including wood, concrete, porous concrete, brick, metal, and aluminum, but not to polyethylene, silicone, or PTFE.

Kamicryl 400 is a aqueous, plasticizer-free and anionic acrylic/styrene copolymer.

ChemSpeed 75 is a single component, very rapid setting high performance structural repair mortar with added migrating corrosion inhibitor. This state of the art fly ash formula produces high, early strength at a wide range of temperatures with very low permeability. Areas repaired with ChemSpeed 75 can be returned to rubber wheeled traffic within 2 hours depending on temperature. ChemSpeed 75 meets ASTM C928 for rapid repair of concrete and can be extended up to 60% with silica gravel deep placements.

Akfix 888P Flexible PU Gun Foam is a single-component PU flexible foam used with an applicator gun and features flexibility, high performance, easier application and reusability. It does not contain any propellant gasses which are harmful to the ozone layer. The foam has a minimum expansion after application (less than 50%) and is therefore very economical to use. The foam is very elastic and has a very high acoustic rating and thermal insulation value.

GlucoSol® 621 is a new entry in the Chemstar water-soluble product line. It is a highly substituted natural polysaccharide designed to impart enhanced functional properties including: solution stability, salt tolerance, surface activity, water retention, improved rheology and viscosity. GlucoSol® 621 offers a unique alternative to competitive natural and synthetic water-soluble polymers

STYSOLAC AW is a unique non-migrating, nonvolatile, non-hydroscopic resin plasticizer for use in both solvent and water base ink and coatings applications. An effective plasticizer for (water-based) alkalized polyner resinates and more polar resin dispersions, as well as for the more alcohol soluble type resin solutions.

Precision Epoxy Products FP-80 is a clear self-leveling system for use in surface plate applications. This system is extremely hard and can be used in industrial laminating applications that have harsh or punishing environments.