Products results

Fainplast Compounds PVC MPH 75/T1 is comprised of Polyvinyl Chloride. It is commonly used for a variety of applications. .

Polyimide /PI Glide™ Tubing is a class of high performing polymers well established in industry for their outstanding chemical, thermal, and mechanical performance properties. Polyimides typically do not melt before decomposing; thus, they demonstrate excellent thermal stability in high as well as low temperatures. Polyimides also exhibit good dielectric properties giving them substantial presence in a number of electrical applications. Zeus polyimide tubing brings these properties and more for both medical and non-medical precision tubing applications. Polyimide tubing provides excellent strength and abrasion resistance. Polyimide tubing also maintains its properties even at very small dimensions. For applications where additional lubricity is needed, PI Glide™, a PI / PTFE composite, provides a lower coefficient of friction for reduced surface resistance of the tubing. Zeus polyimide tubing is also available in a layered or composite construction using a combination of PI and PI Glide™ to suit a variety of tubing requirements. Mechanical properties, lubricious surface, and many other tubing properties can be tailored in this way. Choosing Zeus PI and PI Glide™ tubing for your catheter construction needs allows users to consolidate their components with a single best-in-class supplier.

Rubaloy RA - 70 is the most popular and widely used grade of fluxed NBR / PVC in the polymer ratio of 70-30. It is a non-staining, oil, Ozone, abrasion, weather and flex resistant polymer using medium Acrylonitrile Butadiene Rubber with Poly Vinyl Chloride Resin.

Elastocon® 2860L is a translucent lubricated thermoplastic elastomer that has been developed for applications that require rubber-like properties, a good surface finish, and a reduced coefficient of friction. Elastocon® 2860L is FDA compliant and well suited for consumer products and medical applications. Elastocon® 2860L can be overmolded onto polypropylene.Elastocon® 2860L is supplied as ready to use pellets in 50 lb. bag quantities.

Miracll Chemicals E 180 is a polyester-based thermoplastic polyurethane used for wide variety of applications.

Mediaplast NB-4 is a special adipine acid plasticizer at an exceptionally reasonable price for the use in polar polymers like NBR, H- and XNBR, CM / CSM, CR, ECO, etc. Mediaplast NB-4 is, due to its relatively low volatility and also because of its extremely low setting point, suitable for heat-resistant as well as cold flexible rubber articles (see technical data).

Sylvin Technologies Sylvin™ 5132-70 Clear Red 6249 is a clear vinyl compound formulated for wire insulating applications such as speaker wire, booster cable, and extruded tubing. This compound can be color matched to a variety of colors.

Fainplast Compounds Fainplast™ PVC MPH 62/Y is a Flexible Polyvinyl Chloride product. It can be processed by extrusion and is available in Africa & Middle East, Europe, Latin America, or North America. Applications of Fainplast PVC MPH 62/Y include hose/tubing and medical/healthcare.

Haftolat or the dry form, Haftolat/P, are very effective process aids produced from EPM rubber. I

Mercapto silane for sulfur cured rubber compounds which are containing silica, clays or metal hydroxides as filler. It is suitable for all elastomers and recommended to use if an improvement of technical results, such as tear strength, modulus, compression set or abrasion is required.

This product is a Polyurethane system If the product is cured at room temperature, no entire chemical and mechanical load before 7 days after curing.

Miracll Chemicals E 95 is a polyester-based thermoplastic polyurethane used for wide variety of applications.

Rubaloy RA - 703G is a non-staining, oil, ozone, abrasion, weather and flex resistant polymer using medium ACN (33%) content Acrylonitrile Butadiene Rubber and a special grade of Poly Vinyl Chloride Resin. This grade has improved extrusion rate, extrusion, molding and surface finish. Rubaloy-703G is Pthalate free.

LIM™ 6040 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive Performance Materials masterbatch colors.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 1500C (3020F) to 2050C (4000F) Excellent release from metal molds Potential ApplicationsThe combination of excellent clarity, tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Baby bottle nipples Connector inserts Seals Flexible mounts Valves Sports goggles Masks Health care equipment Camera parts Coating metal rolls.

Dellit® PF CP 21 T is composed of phenolic resin and paper reinforement.

Addisil™ 2050 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80 Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits Good transparency, no yellowing Good mechanical performance Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf life of 6 months for the single components if stored appropriatelyM Very long pot life of 2 to 4 weeks for the mixed components Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations KTW: German Water Regulation. A representative sample has passed the test for tubes, fittings, seals and strorage systems (cold and warm) WRAS (BS 6920). A representative sample has passed the test (cold and warm) W270: Microbiological growth test. A representative sample has passed the test.

Fainplast Compounds Fainplast™ PVC MPH 45/K is a Flexible Polyvinyl Chloride product. It can be processed by extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Fainplast PVC MPH 45/K include hose/tubing and medical/healthcare.

TUFFALLOY 4270 is a series of Liquid Molding Compounds with thermoplastic properties such as high impact, high heat distortion, and low viscosity. This unique chemistry developed by Hapco to meet today's market demands for prototype and low production parts needs.THE TUFFALLOY 4270 Series are available in (4) speeds.The user has the ability to use different speeds of TUFFALLOY 4270, typically using a slower speed initially and increasing to a fast set, 1 minute working life.PROCESSING: TUFFALLOY 4270 Series can be pressure cast, vacuum cast, or open cast. For best results, TUFFALLOY 4274/75 should be used with Hapco's metering/dispensing equipment, RAPIDFIL, MINI FIL, and RAPIDSHOT.

VTEC™ GF63 is a High temperature resistance and it is Superior mechanical properties

Mediaplast AT is a very effective process aid to improve flow properties and to reduce the tackiness of rubber compounds regardless of the polymer used. Processing of CR and ACM compounds in par-ticular is significantly improved by adding a small amount of Mediaplast AT. It improves the demolding properties of technical rubber parts. The sticking of uncured compounds to internal mixers, open mills and conveyor belts will be visibly diminished by the use of Mediaplast AT.

The Addisil™ 472 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf-life of 6 months for the single component if stored appropriately Very long pot life of 2 to 4 weeks for the mixed components.

Tygon R-1000 is a Polyvinyl Chloride product. It is available in North America. Typical application: Hose/Tubing.Characteristics include: Corrosion Resistant Low to No Odor/Taste

EVERLON® TP-40D comply with a international standard , such as ISO 15759, usp class VI, YBB standard. Using on plastic plunger, Syringe, thin film, medical tube, pull cap...etc.

Kettlitz-Dispergator DS is a dispersing agent improving flow and extrusion properties of rubber compounds. The material, based on a water-in-oil emulsion of higher alcohols, esters and aliphatic fatty acids, is recommended to be used in EPDM and EPM, in NBR and butyl rubber compounds.

Zeus Industrial Products Reinforced Polyimide Tubing is a class of high performing polymers well established in industry for their outstanding chemical, thermal, and mechanical performance properties. Polyimides also exhibit good dielectric properties giving them substantial presence in a number of electrical applications. Zeus polyimide tubing brings these properties and more for both medical and non-medical precision tubing applications. Polyimide tubing provides excellent strength and abrasion resistance. Polyimide tubing also maintains its properties even at very small dimensions. For applications where additional lubricity is needed, PI Glide™, a PI / PTFE composite, provides a lower coefficient of friction for reduced surface resistance of the tubing. For applications that require enhanced torque, flexibility, strength, pushability, kink resistance, or burst resistance, reinforced polyimide tubing is available. Zeus reinforced polyimide tubing can be produced in full load and half load braid patterns, with various PPI (pick per inch) depending on your specifications. Lower braid densities (low PPI) result in increased pushability, while higher braid densities (high PPI) result in increased flexibility and steerability. Reinforced polyimide tubing is also available in coil configurations with various WPI (wraps per inch) to meet your requirements.

Antitack BTO-44 VC is a powdered antitack agent, basically containing inert minerals in combination with calcium stearate, detergents, anti-foam and anti-rust agents for the treatment of unvulcanized rubber compounds, endless strips and granules. The product itself is most suitable for batch-off machines with spraying and dipping systems. After drying, the antitack film which remains on the surface of the rubber compounds is easy to control visually.

Fainplast Compounds Fainplast™ PVC MPH 83/T is a Flexible Polyvinyl Chloride product. It can be processed by extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Fainplast PVC MPH 83/T include hose/tubing and medical/healthcare.

Miracll Chemicals E 165D is a polyester-based thermoplastic polyurethane used for wide variety of applications.

Fainplast Compounds Fainplast™ PVC MPH 57 is a Flexible Polyvinyl Chloride product. It can be processed by extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Fainplast PVC MPH 57 include engineering/industrial parts, hose/tubing and medical/healthcare.

LIM™ 6040-D2 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive masterbatch colors. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Mechanical parts such as connector inserts, seals, flexible mounts, and valve parts can be made readily from LIM6040-D2 liquid silicone rubber.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 150°C (302°F) to 205°C (400°F) Excellent release from metal molds The combination of excellent clarity, tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Baby bottle nipples Connector inserts Seals Flexible mounts Valves Sports goggles Masks Health care equipment Camera parts Coating metal rolls.

Mediaplast 650 A is a synthetic plasticizer based on polyalkylbenzene (bi- and trialkylated aromatics), which is especially recommended for the use in elastomers with low polarity like NR, IIR, BR, SBR, EP(D)M, etc. The compatibility with rubber compounds containing strong polar elastomers, like nitrile rubber for example, is low.

Elastocon® SMR1555 by Elastocon TPE Technologies is comprised of Thermoplastic Elastomer (unspecified). It is commonly used as Extrusion Resin and Molding Resin for a variety of applications. Elastocon® SMR1555 is certified as RoHS Compliant. It is available in Pellets form.

Mediaplast WH is a Processing aid and homogenizing agent with non-staining properties in order to improve the stickiness of synthetic rubber compounds. Especially in NBR, EPDM, SBR and EVA the application of Mediaplast WH results in shorter mixing times and better homogeneity.

Fainplast Compounds Fainplast™ PVC MPH 69/D is a Flexible Polyvinyl Chloride product. It can be processed by extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Fainplast PVC MPH 69/D include hose/tubing and medical/healthcare.

Fainplast Compounds PVC MPH 92/T1 is comprised of Polyvinyl Chloride. It is commonly used for a variety of applications. .

Goodyear Rubber Company of So. California Fluoroelastomers are a family comprising copolymers of hexafluoropropylene, vinylidene and terpolymers of tetrafluoroethylene. Viton is a common brand of fluoroelastomers and widely used in high temperature sealing and chemical resistant applications. Fuoroelastomers are known as FKM, categorized under ASTM designation. FKM tubing or hoses are recommended in automotive and other transportation applications. FKM O-rings are alternative to Nitrile rubber products in automobile engines with much higher temperature and chemical resistant applications.